Panasonic Digital Imaging System For Facsimile And Internet Fax Email Functions Dp 8032 Operating Instructions

Customizing Your Machine
191
Fax Parameter Table
Setting YourMachine
014 File Acceptance Report *Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print out after any
memory communication.
Va l i d
017 Receive Mode Manual Setting the reception mode to automatic, or manual. *Auto
022 Substitute Receive Invalid Selecting whether the machine receives to memory when the recording paper runs out, toner runs out, or the recording paper...

Customizing Your Machine
192
Fax Parameter Table
043 Password-Transmit *Off Setting a 4-digit XMT-Password, and selecting whether the machineperforms, and checks the XMT-Password of the receiving station when
transmitting. (See page 77) 
On
044 Password-Receive *Off Setting a 4-digit RCV-Password, and selecting whether the machine performs, and checks the RCV-Password of the transmitting station
when receiving. (See page 79) 
On
046 Select Receive *Invalid Selecting whether the machine performs...

Customizing Your Machine
193
Fax Parameter Table
Setting YourMachine
097 Special Tray
No.1 - 3 *None Select up to 3 Special Trays that will not be used for printing received
faxes. One Tray must always be available for receiving Faxes.
(You can specify one Tray (1 ~ 3) for each selection No. 1, No. 2, and/or
No 3.)
Tray 1
Tray 2
Tray 3
099 Memory Size (Flash Memory) - Displays the amount of base, and optional memory installed.
(Base Memory + Optional Memory)
118 FAX Function Detect Invalid Setting the...

Customizing Your Machine
194
Fax Parameter Table
144 EMAIL Character Set Japanese Selecting the Character Set when receiving, or sending email text.*English
145 Sender Selection *Invalid Selecting a pre-programmed sender’s name, and email address before each transmission.
Va l i d
146 POP Timer 0 to 60 min. Setting the time interval for the machine to check for email on the POP Server.
(0 = Does not check the POP Server for email.)
147 Auto POP Receive Invalid Selecting whether the machine automatically...

Customizing Your Machine
195
Fax Parameter Table
Setting YourMachine
158 PC Remote Update *Invalid Selecting whether the machine will accept commands from an email
application, to:
(a) Program the Internet Parameters
(b) Program the Address Book
(c) Allow retrieval of the Journal
Va l i d
160 Default Domain Invalid Selecting whether the machine accepts to insert the Default Domain when entering Manual Number Dialing.
*Valid
162 TIFF Viewer URL None Selecting whether to include the URL address in the...

Customizing Your Machine
196
Fax Parameter Table
NOTE1. The factory standard, and the current settings are also shown on the Fax Parameter Listprintout. To print the Fax Parameter List, see page 214.
182 Send Comm. JNL *Print Selecting whether the Communication Jornal is printed, emailed, or 
both.
Print:Prints
Email : Emailed to the address selected in the Sender Selection 
 (See page 145).
Both : Prints and Emailed
Email
Both
* = Factory default setting No. Parameter Setting Comments 

197
Setting YourMachine
Setting Up IPv6
This chapter describes the procedures for setting up the IPv6
Note:
Although the address setting of IPv6 can choose an automatic setting or manual setting, it recommends
an automatic setting.  
* When Functions No. 27 and  No. 60 to 64 are set, cycle the power by turning the Power Switch on the Left
side of the machine OFF and ON.
Functional restriction item
Although all the functions of this machine can be used in the dual network environment of IPv4 and IPv6, a...

Setting Up IPv6
198
General Description
Preparation of a setup
Arrangement and explanation of an IPv6 address input keyKey name Function
Field Display 4 characters address divided by [ : ] of IPv6. Call [First Field] [Second Field] from the left ···  [Last Field] for the last.
Ten key An IP address is inputted. Since it sets up by a hexadecimal number, 1 - F can be inputted. Either a  panel screen or a control panel can be inputted.
  key Move the cursor in the input field. 
Press   key, and then the...

Setting Up IPv6
199
Setting YourMachine
Setting the IPv6 Address
The setting method of the IPv6 address is explained.
A setup of IPv6 is performed by  FUNCTION MODE on a panel screen.
Setting Item -IPv6
- IPv6 Auto Configuration
- IPv6 Address
- IPv6 Default Router  
IPv6 Address
1
 
2  
3
Input Key Operator’s password, and press  .
(8 digits: alpha-numeric; alphabet (case-sensitive), numbers, symbols 
(@,.,_,and SPACE))
 x12
4
Function Mode
Select A Function
GENERAL SETTINGS
FAX/EMAIL SETTINGS COPIER...

Setting Up IPv6
200
IPv6 Address
5 
IPv6 will become effective if   is chosen.
6
7
 or   
When   is chosen, IPv6 address and IPv6 Default Router address is set
automatically.
When   is chosen, IPv6 address IPv6 Default Router address is set up
manually.
Ex:
8
9a
Ex: Incase  is .
IPv6 Address will be indicated.
or
OnOK
On
 62 IPv6 Auto Configuration
OnOffOK
On
Off
On
 63 IPv6 Address
62 IPv6 Auto ConfigurationOn