Panasonic Digital Disk Recorders Wj Hd309 Operating Instructions

61
It is possible to stop the sequential display by
pressing a camera selection button.
It is possible to stop the sequential display by
pressing a camera selection button. Sequential display ON
(For the WJ-HD316)
Sequential display ON
(For the WJ-HD309)SEQUENCE
SEQUENCE
SEQ
7
SHIFT+
4&2
4
SHIFT+
Switches in the following order each time the
button is pressed
1 - 4 CH →5 - 8 CH →9 - 12 CH →13 - 16 CH
→1 - 7 CH →1 - 9 CH →10 - 16 CH 
→1 - 13 CH →1 - 16 CH
Switches in the following order each time the...

62
OPERATION USING A PC
It is possible to perform the settings or operate the unit
using a web browser installed on a PC when this unit is
connected to a network.
The available features and the system requirements of a
PC are as follows.
Refer to the Network Operating Instructions (PDF) on the
provided CD-ROM.
 Features
It is possible to operate this unit using a web browser in
much the same way as using the buttons on the front panel
of this unit.
The following functions are available when using a PC...

63
OPERATION OF THE UNIT IN THE CASCADE CONNECTION
When connecting multiple units (up to 4 units) in the cascade connection, it is possible to monitor images from all of the WJ-
HD316/309 in the cascade connection using a monitor. It is necessary in advance to perform the settings to operate the unit in
the cascade connection. Refer to a system administrator for further information.
Features
It is possible to operate the unit in the cascade connection using the buttons on the front panel in the same way...

64
1. Remove the rubber legs (6 pcs.) on the bottom of the
unit.
• Use a flat-blade screwdriver and remove the screws.
2. Install the rack mounting brackets on both sides of the
unit.
• Using the mounting screws (4 pcs.) for the rack mount-
ing brackets, fix them firmly.
3. Install the unit in the rack.
• Fix the unit firmly with the rack mounting screws (4
pcs.).
INSTALLATION IN THE RACK
Remove the rubber legs.
Mounting screws for rack mounting brackets 
(accessories)
 Rack mounting brackets...

Item
65
MANAGEMENT OF USERS/HOSTS
It is necessary in advance to register users and PCs (hosts) who access this unit via a network such as a LAN.
Up to 32 users and 8 hosts can be registered.
The following information can be registered as user information and host information.
For the set items above, the unit will work differently depending on whether the unit is operated directly or operated via a net-
work as follows.
When the unit is operated directly
Operate using the monitor connected with this...

66
Notes:
• When a user is operating this unit using a PS·Data compatible controller, this user can log in automatically as a PSD user
set for PSD User of System on the SETUP MENU.
• When a user logged into this unit using a PS·Data compatible controller and didn’t operate the unit for around 2 minutes,
this PSD user will be forced to log out.
When the unit is operated using a PC via a network
Operate using a PC via a network. Up to 8 hosts (PCs) can access the unit.
When a host tries to log in after 8...

67
OPERATING THE UNIT FOR THE FIRST TIME
Important:
When connecting an optional extension unit (the WJ-
HDE300 series), turn on the power of the extension unit
before turning on the power of this unit.
zTurn on the POWER switch.
xPress the SET button when the system check
complete window is displayed.
The HDD DISK MENU window will be displayed.
Perform the settings with this menu according to your
needs.
Refer to page 16for further information.
After completing the settings, press any button to close...

68
Preparation for maintenance (HDD
replacement, installation, etc.)
When maintaining (HDD replacement, installation, etc.)
without turning the power of the unit off, carry out the follow-
ing operation after setting the HDD SAFETY MODE to ON.
(The default setting is ON.)
This can be set on the Disk Info menu of Maintenance.
Refer to page 94for further information.
Important:
After completing the installation or the maintenance, set
the HDD SAFETY MODE to OFF.
Do the following before starting operation...

69
When the system check has been completed, the HDD
SAFETY MODE window (as shown below) will be displayed.
The camera selection buttons on the front panel (1 - 16 for
the WJ-HD316, 1 - 9, 0 for the WJ-HD309) will light green
and orange (for 2 seconds each) alternately.
Move the cursor to OFF using the arrows button and press
the SET button.
The unit will restart automatically and the system check
complete window will be displayed.
When the system check complete window is displayed,
carry out the...

70
Important
When connecting the Panasonic matrix switcher or the data multiplex unit to this unit, the looped through output signal for
every video input signal from them must be supplied to the video input connectors of this unit directly.
Do not supply the monitor output signal or the spot output signal from the matrix switcher or the data multiplex unit to the video
input connectors of this unit.
Otherwise, the images may be disorderly displayed and recorded for a split second. (The images displayed...