Panasonic Digital Disk Recorders Wj Hd309 Operating Instructions

21
Record manually using an external switch at an emergency
event occurrence.
For example, install an external switch at the reception
counter, and start recording with it when a suspicious indi-
vidual appears.
Refer to a system administrator about the required settings
for emergency recording.
zPress the external switch.
The indicator on the REC button will light and recording will
start.
With the default setting, recording will be performed for 10
seconds.
Emergency recording is the highest priority....

22
It is possible to play recorded images without stopping
recording.
The playback images will be displayed on monitor 2 and
the VGA monitor.
zSelect the camera respective to the recorded
images to be played. (Go to step 2 if not neces-
sary)
Press the desired camera selection button.
The pressed camera selection button will light green or
blue and the respective live images will be displayed.
xStart playback.
Press the PLAY/PAUSE button.
The indicator on the PLAY/PAUSE button will light and the
recorded...

23
Fast forward/Fast reverse Rotating the shuttle ring will change the playback speed (1/2x, 1x, 2x,
5x, 10x, 20x) according to rotated degree. When the shuttle ring is
held in the 20x position (rotated to the end) for 5 seconds, the play-
back speed will be 50x. When the shuttle ring is held 5 more seconds
after the playback speed became 50x, the playback speed will be
100x.
Rotating the shuttle ring clockwise will play images at a faster speed
and rotating it counterclockwise will play images in...

24
Marking It is possible to play from a marked point. Do the following to mark a
desired point.
1. Press the SHIFT button. The SHIFT indicator will light.
2. Press the camera selection button 12 (9 for the WJ-HD309) (MARK)
at a desired point to be marked during playback.
Up to 100 points can be marked. When more than 100 points are
marked, the older marked points will be overwritten by the newer
marked points. In this case, the oldest marked point is the first to
be overwritten.
When marked while...

25
Images from a camera will be recorded on the built-in hard
disk or external recording devices (DVD-RAM drive, DVD-R
drive or CD-R drive) connected to this unit.
Available disk areas are as follows.
Note:External recording devices can be used as a copy
area for images recorded on the hard disk. It is impos-
sible to record images on the external recording
devices directly.
HDD Normal Recording Area/Event Recording Area:
Disk space for recording on the built-in hard disk
Recorded images by manual...

26
cSelect a disk to be played using the jog dial
and move the cursor to OK using the arrows
button. Press the SET button to determine the
selection.
The recording event list window will be displayed. (Refer to
page 28for further information.)
To close the DISK SELECT window, move the cursor to
select CANCEL and press the SET button.
Important:
In the following cases, the recording event list window will
not be displayed even when you move the cursor to OK
and press the SET button after selecting HDD...

27
It is possible to play recorded images from a designated
time and date without stopping recording.
Playback images will be displayed on monitor 2 and the
VGA monitor.
zPress the SEARCH button repeatedly until the
time and date designation window is dis-
played.
The time and date designation window will be displayed on
monitor 2 and the VGA monitor.
xEnter the start time using the jog dial and the
arrows button.
Select the time and date using the jog dial. To move the
cursor, use the arrows button...

28
There are 3 ways to search for a recorded image and play it.
• Search for a recording event and play it (Recording event search)
• Search for a motion detected time and date from the recorded images and play it (VMD search)
• Search for a marked point and play it (Marking search)
Note:Playback images will be displayed on a single screen on monitor 2 and the VGA monitor. To play in a multi-screen,
switch to a multi-screen after starting playback.
 Search for a Recording Event and Play it back...

29
Search filter buttons:Selects the search filter
Filter cancel button:Cancels the selected search filter and lists all recording events
Time and date:
The time when recording started will be displayed.

The time when motion was detected will be displayed.

The time when the point was marked will be displayed.
Camera channel:The camera channel of the recorded image will be displayed. The recorded image of
the displayed camera channel will be played on a single screen.
Recording event:The recording mode...

30
zPress the SEARCH button repeatedly until the
recording event list window is displayed.
The recording event list window will be displayed on moni-
tor 2 and the VGA monitor.
Use the arrows button (CD) to switch between displaying
the list window and the thumbnail window alternately.
To search using a search filter, go to step 4.
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP...