Panasonic Digital Disk Recorders Wj Hd309 Operating Instructions

11
3. Event Display
When an event has occurred, an event display will be
displayed.
The position of an event display will be symmetrical to
the position where the time is displayed. When the time
is displayed at the lower left of the screen, an event dis-
play will be displayed at the upper right corner of the
screen. The default position of an event display is the
upper right corner of the screen (R-UPPER).
The event display will be displayed differently as follows
depending on which event has...

12
Note:When the camera title and the task bar are lay-
ered in this mode, only the task bar will be dis-
played.
Mode 2
Displays the status on the main bar, the left bar and the
right bar.
Mode 3
Displays the status only on the main bar, and does not
display information on the left bar and the right bar.
Note:Mode 2 and Mode 3 are graphic operated. They
may not be as clear as Mode 1. 

Time Displays time and date of the displayed image
When displaying live image: Current time and
date
When playing recorded image: Time and date
when recorded
*: During summer time, an asterisk (*) will be dis-
played on the left side of the displayed time.
13
Delete
Search Indicates that searching is currently being performed
: Currently searching
 Status on the Task Bar
• On the Main Bar
q Status Display Area
w Copy/Delete Iconse Live/Playback Time Display Area
r Alarm Display Areat Error Display Area...

14
tError Display Area
Indicated Item Status Indication
Error Warning Indicates an error occurrence or warning
ALT-*:Alteration is detected
W-ERROR:Failed to write data on the HDD
SMART:Warning of the HDD malfunction
H-METER:Set time for hour-meter (active time of
the HDD) warning has passed
THERMAL:The temperature inside the unit is too
high
POWER: A power outage has been detected
#-nn%:Warning about running out of disk space
while displaying available disk space per-
centage
#-FULL:No available disk...

15
Indicates the available disk space of each partition.
Top:100 % of the disk space is being used (no
available disk space)
Second from the top:80 % of the disk space is
being used
Centre:60 % of the disk space is being used
Second from the bottom:40 % of the disk space
is being used
Bottom:20 % of the disk space is being used
Note:When CONTINUE is selected on the Disk End
Mode page of the Maintenance setup menu, the
available disk space will not be displayed. Refer
to a system administrator for further...

16
zInsert the power plug to an outlet (AC 220 V -
240 V, 50 Hz)
Note:Make sure the power source is AC 220 V - 240 V,
50 Hz.
xTurn on the power switch on the rear panel.
The OPERATE indicator will light and the system check
(checking the system and hard disk) will start.
The startup splash image below will be displayed on moni-
tor 2 and the VGA monitor during the system check.
When the auto login is off, the login window will be dis-
played if any button on the front panel of this unit is pressed
after...

17
CLOCK ADJUSTMENT
It is recommended to check the clock periodically and put
the clock right if it shows the wrong time.
Adjust the clock when displaying a live image.
zPress the SETUP/ESC button for 2 seconds or
more.
The SETUP MENU will be displayed on monitor 2 and the
VGA monitor.
xMove the cursor to System using the arrows
button (CDAB) and press the SET button.
cMove the cursor to Time & Date using the
arrows button (CD), and press the SET but-
ton.
The Time & Date menu will be displayed.
vMove...

18
SHUTDOWN
To shutdown the unit, do the following.
When recording is being performed, press the REC button
for 2 or more seconds. Recording will stop and the indica-
tor on the REC button will go off.
When playback is being performed, press the STOP button.
Playback will stop and the indicator on the PLAY/PAUSE
button will go off.
Turn off the power of the unit after confirming that the HDD1
and HDD2 indicators are off.
Important:
• Detach the plug from the outlet if not operating the unit
for a length...

19
When recording with higher priority than manual recording
is performed, manual recording will not be performed until
this recording finishes.
Refer to the following about the recording mode.
xStop recording.
Press the REC button down for around 2 seconds.
The indicator on the button will go off and recording will
stop.
Notes:
• The camera selection button will light orange (currently
recording) or blue (currently being recorded and dis-
played on the monitor) to indicate which camera is
being...

20
 Recording Time
The possible recording durations on the following table are just the average values. (Refer to the important notice below the
table.)
Recording rate for a single camera channel (Recording without audio)
Unit: Hour
Recording Rate [ips]  SFA SFB FQA FQB NQA NQB EXA EXB
0.1 19 000 12 700 25 400 19 000 38 100 25 400 50 800 38 100
0.2 9 500 6 300 12 700 9 500 19 000 12 700 25 400 19 000
0.3 6 300 4 200 8 400 6 300 12 700 8 400 16 900 12 700
0.4 4 700 3 100 6 300 4 700 9 500 6 300 12 700 9...