Panasonic Digital Disk Recorders Wj Hd309 Operating Instructions

101
[Screenshot 2]
The VMD Setup window will be displayed.
xRotate the jog dial to select SETUP AREA on the status
bar.
Note:To set all areas on the monitor as the motion
detection area, select ALL AREAS and press the
SET button.
[Screenshot 3]
The cross cursor will be displayed on the VMD Setup win-
dow.
cMove the cross cursor to a desired point to be set as
the start point of the motion detection area using the
arrows button, and press the SET button.
[Screenshot 4]
The start point of the motion...

102
xMove the cross cursor onto an area to be deleted using
the arrows button and press the SET button.
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar.
→The VMD Setup window will be closed.
8Set the sensitivity
Set the sensitivity for the created motion detection area.
Sensitivity can be set for each area.
[Screenshot 1]
Start operation from the VMD Setup window.
zRotate the jog dial to select SENSITIVITY on the status
bar.
[Screenshot 2]
The sensitivity of the selected...

103

Move the cursor to the parameter box of each area
using the arrows button (B) and select a moving dura-
tion for an object in each area from the following using
the arrows button (CD).
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar, and press the SET button.
→The VMD Setup window will be closed.
8About the Detection mode
Perform the settings of the detection mode (method of
detection) in the set detection area. Specifying a method...

104
8Alarm Disarm Time
The following are possible for the alarm disarm.
2 s - 10 s (in 1 second intervals)
[Terminal Setup] Perform the settings for
the alarm terminal polarity. 
Select how to supply the signal to the alarm terminal.
N.O.:Signals will be supplied when short-circuited.
(Normally Open)
N.C.:Signals will be supplied when open-circuited.
(Normally Closed)
Note:It is possible to set polarities for each of the alarm
inputs 1-16 respectively using a PC via a network....

105
Perform the settings for the recording schedules of record-
ing and event action by designating a day of the week and
time.
A day can be divided into up to 6 time zones, and record-
ing programs and event action programs can be assigned
to each time zone to create a recording schedule.
Up to 4 normal recording programs (REC Program) and up
to 4 event action programs (Event Program) can be creat-
ed. Perform the settings for the REC Program: resolution
and recording rate. Perform the settings for the...

106
8Recording Rate and Image Quality for Each
Camera Channel
Perform the settings for recording rate, image quality and
recording duration for each camera channel (only for pre-
event recording and post-event recording).
Perform the settings for each recording mode. Assign the
recording rate for each camera channel as described in
Recording Rate for Each Recording Mode above. 
The following are for the recording rate. When OFF is
selected, images from the selected camera channel will not
be recorded....

107
•When a pre-recording area is created in an optional
extension unit (WJ-HDE300 series), it is possible to per-
form pre-event recording for up to 60 minutes accord-
ing to the resolution, recording rate and disk space for
pre-event recording. Refer to page 135for descriptions
of how to create the pre-recording area. Pre-event
recording for the camera channel that has the pre-
recording area in the extension unit will always be per-
formed on the pre-recording area.
•When the set pre-event recording...

108
8Terminal/command alarm
Perform the settings of an event action at a terminal/com-
mand alarm occurrence or the settings of the auto copy
function.
The contents to be set are the same as the settings for
VMD above.
[Time Table] Assignment of REC Program
and Event Program after setting the time
zone
Create recording timetables for each day of the week, and
assign REC Program and Event Program to each timetable.
Up to 6 recording programs can be created.
Do the following to create timetables....

109
nSelect OK using the arrows button and press the SET
button.
Notes: 
•The start time and end time can be set in 15 min-
utes intervals.
•To copy a timetable that is set for a different day of
the week, select Copy the Other Time Table and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to the day of the week box,
press the arrows button (B) and select a day of the
week by rotating the jog dial. After selecting, move
the cursor to OK and press the SET button....

110
Perform the settings for image switching such as the
sequential display setting or the waiting screen (while log-
ging out) setting for displaying on monitors 1 and 2.
[Monitor 1] Switcher function of monitor 1 
Perform the settings for the switcher function of monitor 1.
8Live Sequence
Perform the settings for the sequential display of live
images as follows.
[Screenshot 1]
Start operation from the Monitor1 menu of Switcher on
the SETUP MENU.
zMove the cursor to Live Sequence using the arrows...