Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

71
Mail Setup (MAIL SETUP)
8Alarm Mail Setup (ALARM MAIL SETUP)
Sending Mail (SEND MAIL)
OFF: 
Does not send.
ON: Sends an e-mail to a maximum of four recipi-
ents when an alarm operates.
Attaching Alarm Image (ATTACH ALARM IMAGE)
OFF:
Does not attach.
ON:Attaches the image of the alarmed channel to
the mail.
Mail Server Address (MAIL SERVER ADDRESS)
Enter from the keyboard.
Sender Address (FROM ADDRESS)
Enter from the keyboard, and click the SET button.
8Set Mail Address (SET MAIL ADDRESS)
Enter from...

72
qMain Control Panel Tab
Opens the main control panel.
wAlarm List Tab
Opens the alarm list. 
eNetwork Status Display
LIVE, LIVE SEQ, PLAY, >> (FF), 

73
@2Next Frame Button (NEXT FRAME)
Forwards the frame one step to the next while pausing.
@3Recording Button (REC)
Starts recording.
@4Recording Stop Button (REC STOP)
Stops recording.
!7Fast Forward Button (FF)
Fast-forwards the recorded image on the WJ-HD200 to
the end position.
!8To the Latest Frame Button (TO LATEST)
Jumps the recorded image to the latest frame of the
record.
!9Previous Frame Button (PREV FRAME)
Returns the frame one step to the previous.
@0Pause Button (PAUSE)
Pauses the playback...

74
8Time & Date Search Button (TIME&DATE
SEARCH)
Clicking the button will display the time and date search
dialog.
1. Specify the date, time, and channel. 
2. Click the [SEARCH] button.
The image will be searched, and displayed in the
image area.
Note:Searching may take 18 seconds at worst particu-
larly when the recorder runs simultaneous recording
and playback, and/or when the targeted image is of
small size.
8Camera Control View Button (CAMERA CONTROL VIEW)
Clicking the [CAMERA CONTROL VIEW] button...

75
Clicking the alarm list tab on the main control panel opens
the list.
Alarm events are listed with event numbers, dates, channel
numbers, and event types.
PREVbutton returns the list page to previous one.
NEXTbutton opens the next page.
Alarm List Searchbutton opens the search dialog.
Event types are abbreviated as follows in the list.
TERM: The alarm terminal on the rear of the WJ-HD200
is activated.
VMD: The built-in Video Motion Detector operates.
PC:The recorder received an alarm from a PC.
Alarm...

Slow image refreshment and/or slow
response to operations Remote operations are not accepted
while BUSY indicator is lit.
When accessing via the network:
76
Phenomenon
Power is not turned on.
Error message NO DISK is displayed
on the monitor.Connect the power cord to AC outlet.
TROUBLESHOOTING
Power cord not properly connected
No disk available
Disconnection of camera, camera
cable, or VIDEO IN BNC.
Ventilation blocked, or failure of cooling
fan
HDD status may have changed, or a
malfunction may have...

77
SPECIFICATIONS &
APPENDIX 

78
SPECIFICATIONS
General
Power Source Required: 120 V AC, 60 Hz
Power Consumption: 45 W
Ambient Operating Temperature: +5 °C - +45 °C (41 °F - 113 °F)
Ambient Operating Humidity: Less than 85 %
Dimensions: 420 mm (W) x 44 mm (H) x 350 mm (D)
16-9/16 (W) x 3-7/16 (H) x 13-3/4 (D)
Weight: 5.2 k
g(11.4 lbs.)
Input
Video Input: 1.0 V[p-p]/75 ΩComposite video signal with 75 ΩAutomatic Termination / Looping
through (x8)
Audio Input:–10 dB 10 kΩunbalanced, RCA standard jack
Image Process
Compression System:...

79
STANDARD ACCESSORIES
Rack Mounting Bracket  ............................................................... 2 pcs.
Screw for Rack Mounting Bracket (M3x10) ................................. 6 pcs.
Absorber ...................................................................................... 4 pcs.
Sleeve .......................................................................................... 4 pcs.
Hard Disk Fixing Screw  ............................................................... 4 pcs. 

80
Item
SHIFT
SETUP
FUNCTION
Step playback REW Alarm record
playback/stop Setup menu display on/off
The top of the oldest record will be
accessed. Jump to oldest
UP
LR
UP
DOWNR
WV-CU360
APPENDIX
Remote Control from System Controller
A system controller having PS•Data capability can control the WJ-HD200. The table compares operations of the WJ-HD200
and of the system controller WV-CU360. Make certain that the protocol selection for the WJ-HD200 is set to PS
•Data.
Setup item selection
Parameter...