Home > Panasonic > Recording Equipment > Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 21

21
SETUP PROCEDURES
Prior to Setup
Turning On the Power
1. Plug the power cord into the AC outlet.
2. Turn on the power switch on the rear panel. The oper-
ate LED lights up. An HDD check and a system check
will be carried out while displaying respective mes-
sages.
Power-on recording will start if TIMER has been set to
EXT in the SYSTEM SETUP menu.
3. Press the [REC STOP] button to stop power-on record-
ing, if applicable.
4. Hold down the buttons of [LOCK] and [RESET] simulta-
neously to suspend...

Page 22

22
Displaying WJ-HD200 (MAIN MENU)
1. Confirm that the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system components.
3. Hold down the [STOP] button for 2 seconds. The WJ-
HD200 MAIN MENU appears.
Buttons and Dials Used for Setup
[Dup] button:Moves the cursor upwards in a menu, and
opens the previous menu page.
[Cdown] button:Moves the cursor downwards in a menu,
and opens the next menu page.
JogDial (Counter-clockwise):Decreases the parameter...

Page 23

23
Menu Tree
The figure shows the hierarchy of menu windows.
WJ-HD200
MAIN 
MENU
TIME
ADJUST
SETUP
VMD
SETUP
SERIAL 
SETUP
SEQUENCE
SETUP
CAMERA 
VIEW
SETUP
SYSTEM
LOGCAM NO.
SETUP
VMD
AREA
SETUP
MULTI
SEQ
SETUP
SPOT
SEQ
SETUP SYSTEM
SETUP
CAMERA 
TITLE DISPLAY
SETUP
EXT REC
SETUP
REC
SETUP
TIMER
REC
(Assignment)PROG1 SETUP
(Time Zone)
PROG2 SETUP
 (Time Zone)
TRIGGER
ACTION
SETUP
1 - 1
CAM REC
SETUP
1 - 1
PROG1 NO. 1
PROG1 NO. 4
NO. 1 - NO. 4 (Same as PROG1)
PROG3 SETUP
(Time Zone)NO. 1 - NO. 4 (Same...

Page 24

24
Initializing
You can initialize all disk contents including image data
and/or setup data.
Initializing All Contents & Setup Data
Warning!The following are irrevocable procedures. We
strongly recommend that you copy important pic-
tures from the hard disk.
1. Press the [REC STOP] button or [STOP] button to stop
recording or playback.
2. Turn off the power.
3. Set MODE switches #1 through 4 on the rear panel as
follows:
#1:ON
#2:OFF
#3:OFF
#4:ON
4. Turn on the power.
The disk contents and setup data...

Page 25

25
Main Menu (WJ-HD200 MAIN
MENU)
The main menu is located at the top of the menu tree from
where every menu window starts.
1. Hold down the [SETUP/ESC] button for 2 seconds. The
main menu appears.
2. Select a setup menu you wish to program using the [
D]
or [
C] button, and press the [SET] (JogDial).
The selected setup menu opens. The following pages
will detail each setup menu.
Timer Recording Setup (TIMER
REC)
This menu assigns a timer to start recording by use of an
external timer or the internal...

Page 26

26
Recording Mode Setup (PROG1-4
SETUP, NO. 1-4)
Parameters for internal timer recording are assigned to
each event (NO. 1-4) of the program (PROG 1-4) in this
menu. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The selected recording mode
determines the remaining recording time displayed on the
monitor.
In the SP mode, the field rate and picture quality...

Page 27

27
Post-alarm Recording (POST ALM
REC)
This setting specifies the duration of alarm recording after
an alarm input. Functions active during alarm recording are
buzzer beeping, ALARM LED indication, ALARM status
display, and the ALARM OUT signal.
1. Move the cursor to POST ALARM REC with the [
D] or
[
C] button.
2. Select the desired duration with the JogDial.
The default value is 10 seconds.
The unit will revert to the previous status when the time
has elapsed.
Available times (seconds): 5, 10, 20, 30...

Page 28

28
Manual Recording Setup (REC
SETUP)
The WJ-HD200 will record image and audio data either with
or without timer restrictions. Manual recording is available
when OFF is selected for TIMER in WJ-HD200 MAIN MENU;
the timer schedule does not apply. Alarm recording will
also be carried out with parameters specified in this menu.
Refer to 
Recording Mode Setup PROG1-4 SETUP, NO. 1-
4 for operating procedures and available parameters.
Externally Specified Recording
Mode (EXT REC SETUP)
This setting allows...

Page 29

29
2. Press the JogDial (SET) to validate the selection.
3. Press the [
D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Time & Date Display (TIME&DATE
DISP.)
1. Select ON or OFF with the JogDial.
The default is ON.
ON:Time & date display is enabled. 
OFF:Time & date display is disabled.
2. Press the JogDial (SET) to validate the selection.
3. Press the [
D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display...

Page 30

2. Press the JogDial (SET) to validate the selection.
3. Press the [
D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Disk Check (HDD CHECK)
S.M.A.R.T. (Self-Monitoring Analysis and Reporting
Technology) is activated or deactivated for HDD check.
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON 0:00-23:00:The recorder checks the HDD at the
specified time every day.
OFF:Check is deactivated.
2. Press the JogDial (SET) to validate the...

Start reading Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Related Manuals for Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

All Panasonic manuals