Home > Panasonic > Recording Equipment > Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Page 61

61
8On/Off (ON/OFF)
ON:Displays the camera title.
OFF:Hides the camera title.
8Title (TITLE)
Usable characters:Are shown in the window.
Number of digits:5 digits maximum.
8Title Position (POSITION)
Right-Lower:Displays the title in the lower right corner.
Right-Upper:Displays the title in the upper right cor-
ner.
Left-Lower:Displays the title in the lower left corner.
Left- Upper:Displays the title in the upper left corner.
Click the [SET] button when all items have been set proper-
ly.
System Setup...

Page 62

62
8Password Operation (PASSWORD OPERATION)
Enter a five-digit password to protect normal operations
from unauthorized access.
Available numerals:From 11111 to 88888
8Keylock Buzzer (KEYLOCK BUZZER)
The buzzer will beep or not when a locked button is
pressed.
ON:Enables the buzzer beep.
OFF:Disables the buzzer beep.
8Skip Alarm Recall (SKIP ALARM RECALL)
Specify the number of pages to be skipped in the alarm
log. The alarm log page will jump the specified pages
when the JogDial is rotated.
Available skip...

Page 63

63
Video Motion Detector Setup
(VMD SETUP)
8Sensitivity (SENSITIVE)
LOW:Low sensitivity
MID:Medium sensitivity
HIGH: High sensitivity
OFF:Motion detection is disabled.
Click the [SET] button when all items have been set proper-
ly.
Click the [SETUP] button to open the area setup window.
VMD Area Setup (VMD AREA
SETUP)
Drag a maximum of four areas with the mouse to specify
the detection areas.
Click the [SET] button when all items have been set proper-
ly.
Alarm Setup (ALARM SETUP)
8Alarm Buzzer (ALARM...

Page 64

64
8Parity Check (PARITY CHECK)
NONE:No parity check
EVEN: Even parity
ODD:Odd parity
8Stop Bit (STOP BIT)
1 bit: 1 bit
2 bit:2 bits
8Wait Time (WAIT TIME)
OFF:Retransmission is disabled.
100 MSEC: 100 m seconds
200 MSEC:200 m seconds
1 SEC: 1 second
8System Unit Address (SYSTEM UNIT ADDRESS) 
(only for PS
•DATA)
Assignable addresses:From 1 to 99, must be unique
in the chain.
8Control Unit Addresses 
(CONTROL UNIT ADDRESS) (only for PS
•DATA)
Assignable address:From 1 to 99, must be unique in
the chain....

Page 65

65
IP Address (IP ADDRESS) 
The IP address is displayed. Enter from the keyboard.
Netmask (NETMASK)
The netmask is displayed. Enter from the keyboard.
Default Gateway (DEFAULT GATEWAY) 
The default gateway is displayed. Enter in from the key-
board.
8Domain Name Service (DOMAIN NAME SERVICE)
OFF:Disables DNS, only IP address usable.
MANUAL:Enables DNS.
AUTO:Enables DNS.
Domain Name (DOMAIN NAME)
Enter from the keyboard.
DNS Server Address (DNS SERVICE ADDRESS)
Enter from the keyboard.
8Dynamic DNS...

Page 66

66
SNMP Community (SNMP COMMUNITY)
Enter from the keyboard.
SNMP Contact (SNMP CONTACT)
Enter from the keyboard. 
SNMP System Name (SNMP SYSTEM NAME)
Enter from the keyboard. 
SNMP System Location (SNMP SYSTEM LOCATION)
Enter from the keyboard.
Click the [SET] button when all items have been set proper-
ly.
The WJ-HD200 will restart, and you will be requested to
enter the URL as described earlier in Main Page and
Control Panel.
Switcher Setup (SWITCHER
SETUP)
This window specifies sequence setups only...

Page 67

67
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be displayed in
single spot mode.
QUAD 4A: Camera images 1 through 4 will be dis-
played in quad-split mode.
QUAD 4B:Camera images 5 through 8 will be dis-
played in quad-split mode.
8Time (TIME)
Available times: 2-30 S
Click the [SET] button when all items have been set proper-
ly.
Spot Sequence Setup (SPOT
SEQUENCE SETUP)
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be displayed.
OFF: The blackout screen will be...

Page 68

68
8System Software Version (SYSTEM VERSION) 
This line displays the version number of the installed
system software.
8MAC Address (MAC ADDRESS)
A MAC (Media Access Control) address is displayed. 
8IP Address (IP ADDRESS)
The IP address is displayed.
8Subnet Mask (SUBNET MASK)
The subnet mask is displayed.
8Gateway (GATEWAY)
The gateway is displayed.
8Domain Name (DOMAIN NAME)
The domain name is displayed when it is set to ON in
the network setup. 
8DNS Server Address (DNS SERVER ADDRESS)
The DNS server...

Page 69

69
User Setup (USER SETUP)
A maximum of 16 users can be registered.
8User Authorization (USER AUTHORIZATION)
OFF:Allows free access.
ON: Verifies the password and access level for a maxi-
mum of sixteen users.
Click the [SET] button.
8User Name (USER NAME)
Enter from the keyboard. The default is admin.
8Password (PASSWORD)
Enter from the keyboard. The default is admin.
8Access Level (ACCESS LEVEL)
The default is [1].
[1] ADMINISTRATOR:Allows access to the setup
parameters, live and playback images.
[2]...

Page 70

70
Interval (INTERVAL)
Available times: 
1 - 1 440 seconds, 1 - 1 440 min-
utes
Channel to Send (CHANNEL TO SEND)
OFF:
Does not send the channel image.
ON:Sends the channel image.
Click the [SET] button when all items have been set proper-
ly.
FTP Client Setup (FTP CLIENT
SETUP)
8Basic Setup (BASIC SETUP)
Server Address (SERVER ADDRESS)
Enter the server address.
Login User Name (LOGIN USER NAME)
Enter the user name.
Login Password (LOGIN PASSWORD)
Enter the password.
Mode (MODE)
Available modes:...
Start reading Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Related Manuals for Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

All Panasonic manuals