Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

							31
 Chapter 2    General Settings
8Select “Input”, and then enter the 
Date and Time.
Ex: August/1st/2006 00:00
9Select “OK”.
10Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 
						

							32
 Chapter 3    Copier Settings
Chapter 3
Copier Settings
Copier Settings
In Copier User Mode, the following items can be changed.
Copier User
No.ParameterCommentsSelective ItemStandard
Setting
0 - 4 00 Margin Value 
DefaultSet the default margin. 5 mm, 10 mm, 15 
mm, 20 mm10 mm
01 Edge Value 
DefaultSet the default edge. 5 mm, 10 mm, 15 
mm, 20 mm5 mm
02 Book Value 
DefaultSet the default book. 15 mm, 20 mm, 25 
mm, 30 mm20 mm
03 Margin Reduction 
Def.To copy with the binding margin, set 
whether to reduce the copy image.No, Yes No
•No
The copy image is not reduced.
When copying with wide margin, a part of the image may not be 
copied.
•Yes
The copy image is reduced according to the binding margin.
04 2-Sided Mode 
DefaultSet the default 2-sided Mode.
No : Single-sided copy
1 to 2 : 1 -> 2 Copy
2 to 2 : 2 -> 2 Copy
B to 2 : Book -> 2 CopyNo, 1 to 2, 2 to 2, 
B to 2No
5 - 9 05 N in 1 Default 
ModeSet the default N in 1 Mode. 2 in 1, 4 in 1, 6 in 1 2 in 1 
						

							33
 Chapter 3    Copier Settings
5 - 9 06 Reduce N in 1 for 
Spa ceFor N in 1 Copy, set whether to leave a 
margin between copy images.
•No
No margin is inserted.
•Yes
A margin is inserted.No, Yes No
07 Booklet Default 
Mag.For Booklet Copy, set whether to reduce 
the copy image and add a center margin.
• 100%
8.5 x 11 sized originals are copied onto 
11 x 17 sized paper without 
reduction.
• Reduce
8.5 x 11 sized originals are reduced to 
5.5 x 8.5 in size and copied onto 8.5 x 11 
sized paper.100%, Reduce Reduce
Copier User
No.ParameterCommentsSelective ItemStandard
Setting
 Margin
11 x 1 7
8.5x11 8.5x11
 Margin
8.5x11
5.5x8.5 5.5x8.5 
						

							34
 Chapter 3    Copier Settings
5 - 9 08 Digital Skyshot 
ModeEnable or disable Digital Skyshot Mode.
•No
Digital Skyshot Mode is disabled.
•Normal
Skyshots are used with standard quality.
• Quality
Skyshots are used with better quality 
than in “Normal”.
zRefer to Example : Digital Skyshot 
Mode (see page 40).No, Normal, Quality Normal
09 Manual Skyshot 
ModeEnable or disable Manual Skyshot Mode.
•Off
Manual Skyshot Mode is disabled.
•M1,On
The image is copied in pre-registered M1 
size.
(Standard setting : 70x160mm)
•M2,On
The image is copied in pre-registered M2 
size.
(Standard setting : 95x220mm)
•M1,M2,On
Copied in pre-registered M1 or M2 size. 
zRefer to Example : Manual Skyshot 
Mode (see page 41).Off, 
M1,On, 
M2,On, 
M1,M2,OnOff
10 - 14 10 G-Cl. Detect 
ModeSet the ground color detection mode. Tip, Area Tip
11 Sort Priority ADF Selects the sort priority when using the 
ADF.
zShift, Staple, Group
When the optional paper Transport Unit 
is outer, this setting is available.None, Sort, Shift, 
Staple, GroupSort
12 Sort Priority Glass Selects the sort priority when using the 
Platen.
zShift, Staple, Group
When the optional paper Transport Unit 
is outer, this setting is available.None, Sort, Shift, 
Staple, GroupNone
13 Stamping Default 
ModeSet the default Stamping Mode. Page, Date, Issue, 
Te x tPage
14 Page Numbering 
StyleSet the page numbering style. -n-, 
n/m-n-
Copier User
No.ParameterCommentsSelective ItemStandard
Setting 
						

							35
 Chapter 3    Copier Settings
15 - 19 15 Img. Repeat 
Dotted LineSet whether to print perforations between 
copy images in image repeat copying.
• None
Perforations are not printed.
•Print
Perforations are printed.None, Print Print
16 Staple Position 
SettingSet the default stapling position. Upper R, Upper L,
L Center, U Center, 
R Center
(R: Right, L: Left, 
 U: Upper) Upper L
17 Hole Punch 
DefaultSet the default punch. Off, On Off
18 Double Exposure Set the default double exposure. Off, On On
20 - 24 20 Add User Color Set the ratio of cyan, magenta, and yellow 
and register the mixed color.
21 Modify User Color Modify a registered color.
22 Delete User Color Delete a registered color.
24 Key Operator 
ModeEnter the Key Operator password to display 
the Key Operator Mode (see page 36).00000000
Copier User
No.ParameterCommentsSelective ItemStandard
Setting
Perforations 
						

							36
 Chapter 3    Copier Settings
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
0 - 9 00 Print Copier Settings Print a Copier Settings list.
To cancel printing the copier 
setting list, press “Stop” and “OK”. 
While processing the cancellation, 
panel operation is denied, and an 
error beep is produced.
The feeding paper(s) will be 
ejected before completing the 
above cancellation operation.
If setting a parameter, an asterisk 
mark (*) will be added before the 
parameter number.St o p,  Sta r t Sta r t
01 Paper Size Priority Set the paper size priority.
11x17 , Legal , 
8.5x11 , 8.5x11 , 
5.5x8.5 , A3 , 
B4 , A4 , A4 , 
B5 , B5 , A5 , 
8x13 , 8.5x138.5x11
02 Original Mode Default Set the default Original Type of 
the quality adjustment.
•Text:
Text1 (Printed),
Text2 (Pencil)
• Text/Photo:
T/P1 (Commercial),
T/P2 (Photo Paper),
T/P3 (Laser Printed)
•Photo:
Photo1 (Commercial), 
Photo2 (Photo Paper),
Photo3 (Laser Printed)
•Other Types:
Other1 (Map), 
Other2 (Tracing Paper), 
Other3 (News Paper)Te x t 1 ,  Te x t 2 ,  T / P 1 ,
T/P2, T/P3, Photo1, 
Photo2, Photo3, 
Other1, Other2, 
Other3T/P1
03 Color Mode Default Set the default Color Mode. Auto, Black, Color, 
2Color, 1ColorAuto
04 Text Density When Original Mode is “Text”, 
set the default density.-3 to +3 0
05 T/P Density When Original Mode is “Text/
Photo”, set the default density.-3 to +3 0
06 Photo Density When Original Mode is “Photo”, 
set the default density.-3 to +3 0
07 Density (Other Type) When Original Mode is “Other 
Ty p e s”, set the default density.-3 to +3 0
08 Overlay Density Set the default density for 
overlay copying.-3 to +3 0
09 Background Removal Set the default Background 
Removal.Off, Level:1 to Level:6 Level:3 
						

							37
 Chapter 3    Copier Settings
10 - 19 10 Bleedthrough Prevention Set the default bleedthrough 
prevention.Off, Level:1 to Level:6 Off
11 Contrast Set the default contrast. -3 to +3 0
12 Sharpness Set the default sharpness. -3 to +3 0
13 Saturation Set the default color saturation. -3 to +3 0
14 Tint Set the default tint. -3 to +3 0
15 Color Balance Set the default color balance for 
Cyan, Magenta, Yellow and 
Black.
(Darker, Medium and Lighter 
Areas)-3 to +3 0
20 - 29 21 Page Insertion Default Set the default page insertion. Blank, Copy Blank
22 Cover Mode Default Set the default Cover Mode. F, Blank,
F,  C o p y,
FB, Blank,
FB, Copy
(F: Front cover, FB: 
Front & Back cover)F,  B l a n k
23 Job Build and SADF Mode Enable or disable SADF Mode. No, Yes Yes
24 Maximum Copy Setting Set the limit copy count. 0 to 99
(0: No limit)0
25 M1, Size Change the skyshot size 
registered on the M1 key.X: 5 to 432mm
Y: 5 to 297mm70, 160 
(mm)
26 M2, Size Change the skyshot size 
registered on the M2 key.X: 5 to 432mm
Y: 5 to 297mm95, 220 
(mm)
27 Memory Overflow Warning Set sort copying when the 
memory is full.
•Print
The read original is copied.
• Cancel
The read original is deleted.Print, Cancel Print
28 Color Spec (1Color) Set the default one color.
z“Preset 1 to 6” can be 
selected when you set “20 
Add User Color” in Copier 
Settings.Red, Yellow, Green, 
Magenta, Blue, Cyan, 
Preset1, Preset2, 
Preset3, Preset4, 
Preset5, Preset6Red
29 Color Spec (2Color) Set the default two colors.
z“Preset 1 to 6” can be 
selected when you set “20 
Add User Color” in Copier 
Settings.Red, Yellow, Green, 
Magenta, Blue, Cyan, 
Preset1, Preset2, 
Preset3, Preset4, 
Preset5, Preset6Red
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							38
 Chapter 3    Copier Settings
30 - 39 30 Color Spec (Overlay) Set the default overlay color.
z“Preset 1 to 6” can be 
selected when you set “20 
Add User Color” in Copier 
Settings.Full, Red, Magenta, 
Green, Cyan, Blue, 
Black, Yellow, White, 
Preset1, Preset2, 
Preset3, Preset4, 
Preset5, Preset6Full
31 Mono Color Judge Level Set the auto detection level for 
color original.
1: Making an original easier to 
detect as monochrome.
7: Making an original easier to 
detect as colored.1 to 7 4
32 Color Toner Save (T) In color mode, set the level 
of toner saving when the 
Original Type is “Te x t”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
33 Color Toner Save (T/P) In color mode, set the level 
of toner saving when the 
Original Type is “Te x t / P h o t o”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
34 Color Toner Save (P) In color mode, set the level 
of toner saving when the 
Original Type is “Photo”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
35 Color Toner Save (Other) In color mode, set the level 
of toner saving when the 
Original Type is “Other Types”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
36 Mono Toner Save (T) In monochrome mode, 
set the level of toner saving 
when the Original Type is “Te x t”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
37 Mono Toner Save (T/P) In monochrome mode, 
set the level of toner saving 
when the Original Type is “Te x t /
Photo”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
38 Mono Toner Save (P) In monochrome mode, 
set the level of toner saving 
when the Original Type is 
“Photo”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
39 Mono Toner Save (Other) In monochrome mode, 
set the level of toner saving 
when the Original Type is “Other 
Ty p e s”.None, Level 1, Level 
2, Level 3, Level 4, 
Level 5None
40 - 44 40 Copy Customize Set whether to indicate the More 
Menus functions individually.
41 RSV. a Job Setting Clr The copy Job Setting of 
reservation is clear.No, Yes Yes
  No. 32 to 39
After setting any of these parameters, turn the 
machine’s power switch Off, 
and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							39
 Chapter 3    Copier Settings
Memo 
						

							40
 Chapter 3    Copier Settings
Example : Digital Skyshot Mode
Digital Skyshot Mode allows copying an original without generating dark borders even if the platen 
cover is opened.
zWhen copying in “Quality” mode combined with “N in 1” or “2 Page”, the Quality mode will be changed to 
“Normal” mode automatically.
1Press the Function key.
2Select “Copier Settings”.
3Select “5-9”.
4Select “08 Digital Skyshot Mode”.
5Select the desired item, and then 
select “OK”.
6Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode.
No Digital Skyshot Mode is 
OFF.
Normal For standard quality.
Quality For better quality than 
“Normal”.