Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

							81
 Chapter 2    More Menus Features
Overlay Copying with Registered Image
Overlay an image stored in memory onto the copy.
zAvailable size is 8.5 x 11.
z“Auto” cannot be selected in color mode.
zIf the orientation of the original is different from the form, the original is copied by automatically rotating when 
overlaid.
zIf enlargement or reduction is selected using “Zoom” or the paper size setting, the size of the original is 
enlarged or reduced according to the setting. However, the size of the form is not enlarged or reduced.
zWhen “Edge” or “Book” is selected, the edge erasing function and the center erasing function are not executed 
for the overlay original.
zWhen “Margin” is selected, a binding margin is also effective for the overlay original.
zIf “Blank” is selected for “Cover” or “Page Insertion” setting, overlay will not be executed. The image overlay 
is executed for “Copy” pages in stead.
zNote that if the power is turned OFF when Hard Disk Drive is not installed, the overlay image is erased.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Form Overlay”.
Form The scanned 
original
Continue on the next page... 
						

							82
 Chapter 2    More Menus Features
5Select the registered form, and then 
select “OK”.
zFor the details about how to register the 
form, refer to the Save (see page 83).
zWhen Hard Disk Drive is not installed, the 
screen of step 5 is not displayed.
(Hard Disk Drive has been equipped 
normally with DP-C354/C264. It is optional 
equipment for DP-C323/C263/C213.)
6Set the order of overlay form, and the 
scanned original, and then select 
“OK”.
7Enter the desired number of copies.
8Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
Overlay 
on TopCopied with the scanned original 
overlaid on the form.
Overlay 
on BottomCopied with the form overlaid on 
the scanned original. 
						

							83
 Chapter 2    More Menus Features
File Edit
Up to 12 editing functions are available in the Form Overlay Feature.
zRefer to the Overlay Copying with Registered Image (see page 81)
zIf Hard Disk Drive is installed, an image can be stored.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
„Save
zIf no optional hard disk drive is installed, only 1 form can be registered, and the title cannot be entered. When 
the power is turned OFF, the form will be deleted.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
zThe size of the original, which can be registered in the form, is 8.5 x 11.
zAfter the registration, the form transparency level and the specified colors cannot be changed.
z“Auto” cannot be selected in the color mode.
1Place the original for overlay form.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “File Edit”.
5Select the button, that has no file 
name.
Continue on the next page... 
						

							84
 Chapter 2    More Menus Features
6Select “Save”, and then select “OK”.
7Select the specified colors of the form 
from basic/custom, and then select 
“OK”.
‰When selecting from the basic colors
‰When selecting from the registered 
custom colors
zIf “Add Custom” is selected, Add Custom 
screen is displayed, and colors can be 
registered as New Color Registration (see 
page 14)
8Adjust the overlay level with “Lighter” 
and “Darker”, and then select “OK”.
zIf cancel to save the overlay form, select 
“Cancel”.
9Press the Start key.
10Select “Ye s”.
LighterOverlay level is decreased.
DarkerOverlay level is increased. 
						

							85
 Chapter 2    More Menus Features
11Input the file name, and then select 
“OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
zAfter completing the editing of the file name, 
press the Reset key to return to the initial 
screen of the current active mode. 
						

							86
 Chapter 2    More Menus Features
„Erase
1Select the file name to be deleted.
zTo display File Edit screen, refer to steps 2 
to 4 in Save (see page 83).
2Select “Erase”, and then “OK”.
3Select “Ye s”.
zAfter completing the deletion of the form, 
press the Reset key to cancel the settings.
„File Name Edit
1Select the file name to be edited.
zTo display File Edit screen, refer to steps 2 
to 4 in Save (see page 83).
2Select “File Name Edit”, and then 
“OK”.
3Change the file name, and then select 
“
OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
zAfter completing the editing of the file name, 
press the Reset key to return to the initial 
screen of the current active mode. 
						

							87
 Chapter 2    More Menus Features
Memo 
						

							88
 Chapter 3    Other Features
Chapter 3
Other Features
Making Copies with the ADF Opened
The original can be copied without generating dark borders even if the ADF is opened.
Skyshot Mode
Skyshot Mode can be selected in the standard settings.
zWhen “2 Page” or “N in 1” is selected, only “Normal” can be set in Skyshot Mode.
zIf there is a white margin, less than 5 mm around the original, the edge of the copy may come out abnormal 
(white lines/streaks). To avoid the problem, change the setting of “Digital Skyshot Mode” to “No”. For setting 
of “Digital Skyshot Mode”, refer to Copier Settings in the Operating Instructions (For Function Parameters) 
on the provided CD-ROM.
1Open the ADF more than 45 degrees, 
and then place the original on the 
Platen Glass, leaving it open.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select copy features if necessary.
4Enter the desired number of copies.
5Press the Start key.
zPlace the next original, and follow the 
instructions described on the touch panel 
display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
Face Down. Align with top left
corner. 
						

							89
 Chapter 3    Other Features
Manual Skyshot Mode
Copying with pre-registered scan size into memory.
zBefore using the Manual Skyshot Mode, please set M1 or M2 in the preset jobs. Refer to the Copier Settings 
in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
zOriginals with black borders may not be copied properly.
zIf Manual Skyshot Mode is selected in “Sort”, “Shift-Sort”, “Rotate-Sort” or “Staple-Sort”, the setting is 
automatically changed to “Non Sort”.
1Open the ADF, and then place the 
original on the Platen Glass, leaving it 
open.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select copy features if necessary.
4Select “Preset Jobs” on the Basic 
Menu screen.
5Select the original size from either 
“M1:” or “M2:”.
6Enter the desired number of copies.
7Press the Start key.
zPlace the next original, and follow the 
instructions described on the touch panel 
display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							90
 Chapter 3    Other Features
Reser ving the Next Copy Job While the 
Current Copy Job is Progressing
The next copy job can be reserved while the current copy job is under way.
If Hard Disk Drive is not installed, this function is not available.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
1Place the next original while copying 
current job.
2Select “Reserve a Job”.
3Select copy features if necessary.
4Enter the desired number of copies.
5Press the Start key.
zWhile the current job is progressing, the 
next copy job will be scanned and stored 
into the Hard Disk Drive.