Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

							61
 Chapter 2    More Menus Features
Copying with Stamping
Page Numbers, Date, etc. can be stamped on each sheet.
zThis function can be selected when the original is placed on the ADF.
zOnly 1 of the page number, date, control number and characters can be selected to print in 1 scanning. 2 or 
more stamps cannot be stamped.
zStamped only in black.
zNo stamp is printed on a blank page when an odd number of originals is copied with “1 -> 2” setting selected.
„Basic Operation for Stamping
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Stamping“.
•Page Number (see page 62)
•Issue Number (see page 64)
•Date (see page 66)
•Te x t  S ta m p (see page 68)
5Enter the desired number of copies.
6Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							62
 Chapter 2    More Menus Features
„Page Number
The original can be copied with page numbers printed.
zThe default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in 
the Operating Instructions (For Function Parameters) on the provided CD-ROM.
zMake sure to select “Sort”.
1Select “Page Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position.
4To change the start page, or start 
position, select “Change”.
Select the orientation of the 
original according to the 
orientation of its characters 
(vertical direction).
Select the orientation of the 
original according to the 
orientation of its characters 
(horizontal direction).
The page number is printed on the 
bottom at the center.
The page number is printed on the 
bottom right side.
The page number is printed on the 
opposite side. 
						

							63
 Chapter 2    More Menus Features
5If “Change” was selected in step 4, 
select the starting page or number.
6Only the case of selecting “Change” in 
step 4, input the starting page number 
with “S” and “T”, or the keypad, and 
then select “OK”.
zStarting page number can be set from1 to 
999.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61).
7Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61).
The page numbering starts from 
the first page.
The page numbering starts from 
the second page.
The page numbering starts from 
the third page.
Each time it is selected, the number 
increments by 1.
Each time it is selected, the number 
declines by 1. 
						

							64
 Chapter 2    More Menus Features
„Issue Number
The original can be copied, and printed in consecutive numbers from 001 to 999.
zThe issue numbers can be set from 001 to 999. After 999, the number returns to 001.
1Select “Issue Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of issue 
number.
Select the orientation of the 
original according to the 
orientation of its characters 
(vertical direction).
Select the orientation of the 
original according to the 
orientation of its characters 
(horizontal direction).
The issue number is printed on 
the bottom at the center.
The issue number is printed on 
the bottom right side.
The issue number is printed on 
the top opposite side. 
						

							65
 Chapter 2    More Menus Features
4Input the starting number of the issue 
number with “S” and “T”, or the 
keypad, and then select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61).
Each time it is selected, the number 
increments by 1.
Each time it is selected, the number 
declines by 1. 
						

							66
 Chapter 2    More Menus Features
„Date
The original can be copied with a printed date. The date is printed in MM/DD/YYYY format.
1Select “Date”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of the 
date stamp.
4To change the date, follow the steps 
below.
1Select “Change”.
The cursor is displayed.
08/01/2006 08/01/2006
Select the orientation of the 
original according to the orientation 
of its characters (vertical direction).
Select the orientation of the 
original according to the orientation 
of its characters (horizontal 
direction).
The date is printed on the bottom 
at the center.
The date is printed on the bottom 
right side.
The date is printed on the opposite 
side. 
						

							67
 Chapter 2    More Menus Features
2Move the cursor to the desired position using 
 and  .
3Update the date with the Keypad.
5Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61). 
						

							68
 Chapter 2    More Menus Features
„Text Stamp
The original can be copied with printed text.
zUp to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed.
zThe font size is 2.1 mm x 3.1 mm.
1Select “Text Stamp”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of the text 
stamp.
4Select “Change”.
Select the orientation of the 
original according to the 
orientation of its characters 
(vertical direction).
Select the orientation of the 
original according to the 
orientation of its characters 
(horizontal direction).
The text stamp is printed on 
the bottom at the center.
The text stamp is printed on 
the bottom right side.
The text stamp is printed on 
the opposite side. 
						

							69
 Chapter 2    More Menus Features
5Input text, and then select “OK”.
zUp to 32 characters.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
6Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61). 
						

							70
 Chapter 2    More Menus Features
Centering
The copying image can be centered automatically on selected paper.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by 
ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and then place original(s) on the 
platen, leave it open.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Centering”.
5Select the desired type of paper, and 
then select “OK”.
6Enter the desired number of copies.
7Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.