Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

							71
 Chapter 2    More Menus Features
Image Repeat
Create multiple images on the sheet from single original.
zYou can change to have dotted lines printed between each copy images. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by 
ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and then place original(s) on the 
platen, leave it open.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Image Repeat”.
5Select the desired type of paper, and 
then select “OK”.
6Enter the desired number of copies.
7Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
The minimum size of the 
original is 20 mm x 20 mm. 
						

							72
 Chapter 2    More Menus Features
Insertion Modes
Add a Cover Page to Copies
The original can be copied using other types of paper as a Cover Page. Only the Front Cover, or Front 
and Back Covers can be selected.
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Cover”.
The front cover is copied 
on color paper. 
						

							73
 Chapter 2    More Menus Features
5Determine whether to copy the Front/
Back cover.
6Select “Cover” until the paper tray to 
be used is displayed.
zWhen changing paper other than the cover 
page, press the Copy key, and change the 
paper tray.
zWhen using color paper for copying the 
cover page, place the paper in the Sheet 
Bypass beforehand and also select the type 
of paper that you will be using. If the type of 
paper is not selected properly, the quality of 
the image may become poor. Refer to the 
Operating Instructions (For Basic 
Operations) on the provided booklet.
7Select “OK”.
8Enter the desired number of copies.
9Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
Front 
BlankSelect to add a Blank 
Front Cover.
Front 
CopySelect to add a Copied 
Front cover.
Front+Back
BlankSelect to add a Blank 
Front and Back Cover.
Front+Back
CopySelect to add a Copied 
Front and Back Cover. 
						

							74
 Chapter 2    More Menus Features
Inserts Blank/Copied Pages Between Copies
The original can be copied by inserting other types of paper between specified pages.
You can copy specified pages (including the cover page) on paper such as colored paper set in a 
Paper Tray, or on the Sheet Bypass.
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Page Insertion”.
5Select the type of page to insert.
6Select “Page Insert” until the paper 
tray to be used is displayed.
zWhen changing paper other than inserted 
pages, press the Copy key, and change the 
paper tray.
zWhen using color paper for copying the 
cover page, place the paper in the Sheet 
Bypass beforehand and also select the type 
of paper that you will be using. If the type of 
paper is not selected properly, the quality of 
the image may become poor. Refer to the 
Operating Instructions (For Basic 
Operations) on the provided booklet.
1
2
3
4
5
61
2
3
4
5
61
2
3
4
5
6
Blank Pages Copied Pages
BlankInserted page is Blank.
CopyCopied insertion pages. 
						

							75
 Chapter 2    More Menus Features
7Select “OK”.
8Input the page numbers with keypad 
where the insertion pages are placed.
9Select   to enter the following 
page numbers where the insertion 
pages are placed.
zBy selecting   and  , move 
cursor to enter the insertion page numbers.
zUp to 20 insertion page numbers can be 
entered.
10Select “OK”.
11Enter the desired number of copies.
12Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							76
 Chapter 2    More Menus Features
Inserts Blank Pages Between Transparency Film
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Place the Transparency Film on the 
Sheet Bypass.
zHow to using Sheet Bypass and changing 
the Printing Media, refer to Adding Paper 
 in the Operating 
Instructions (For Basic Operations) of 
provided booklet.
5Select “Insertion / Overlay”, and then 
select “Transparency Interleaving”.
6When changing the paper to be 
inserted between Transparency Film, 
select “Page Insert” until the paper 
tray you want to use is displayed.
7Select “OK”.
8Enter the desired number of copies.
9Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							77
 Chapter 2    More Menus Features
Memo 
						

							78
 Chapter 2    More Menus Features
Overlay Modes
Overlaying an Image Onto the Copies
The original can be overlaid with the first page of the original.
The first page is called the overlay original, and the second page onwards are called the scanned 
original, respectively.
zThe size available for both of the overlay original, and the scanned original is 8.5 x 11.
z“Auto” cannot be selected in color mode.
zWhen “Margin” is selected, a binding margin is also set for the overlay original.
zWhen “Cover” or “Page Insertion” is selected, if the cover page and insertion pages are not set to be copied, 
the overlay is not executed for Blank pages. If these pages are set to be copied, the overlay is executed for 
copied pages.
zIf Hard Disk Drive is not installed, this function is not available.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Overlay”.
The overlay originalscanned originals 
						

							79
 Chapter 2    More Menus Features
5Select the color of the overlay original 
from the basic colors, and registered 
custom colors, and then select “OK”.
‰When selecting from the basic colors
‰When selecting from the registered 
custom colors
zIf “Add Custom” is selected, Change Color 
Add Custom screen is displayed, and colors 
can be registered. Refer to the New Color 
Registration (see page 14)
6Adjust the overlay density with “Lighter”, 
and “
Darker”, and then select “OK”.
7Select the overlay position, and then 
select “OK”.
8Enter the desired number of copies.
9Press the Start key.
zWhen the overlay copying is completed, the 
overlay original registration confirmation 
screen is displayed.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
10Select “Ye s” or “No”.
LighterOverlay density level is 
decreased.
DarkerOverlay density level is 
increased.
Overlay on 
To pCopied with the scanned original 
overlaid on the overlay original.
Overlay on 
BottomCopied with the overlay original 
overlaid on the scanned original.
Ye sRegister the overlay image.
NoClear the overlay image.
Continue on the next page... 
						

							80
 Chapter 2    More Menus Features
11Determine where to register the 
overlay original.
12Select a desired button has no names 
registered, and then select “OK”.
13Input the button name with Keyboard, 
and then select “OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on provided CD-ROM.