Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

							31
 Chapter 1    Basic Menu Features
Memo 
						

							32
 Chapter 1    Basic Menu Features
Proof Copying
When making more than one copy, the first copy can be printed as a proof copy.
After confirming its quality, the remaining copies can be printed.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select the copy features if necessary.
4Enter the desired number of copies.
5Select “Proof Set”.
6Press the Start key.
The first copy is printed, and a confirmation 
screen appears.
7If the copy quality is satisfactory, 
select “Ye s”.
The remaining copies are printed.
‰If the copy quality is not satisfactory.
1Select “No” to return to the Basic Menu 
screen.
2Place the original again.
3Adjust the quality settings.
4Press the Start key. 
A proof copy is printed, and a confirmation 
screen appears. Confirm if the copy quality is 
acceptable.
5Select “Ye s”.
The remaining copies are printed.
The remaining copies are 
made after confirmation One copy as a 
proof copy 
						

							33
 Chapter 1    Basic Menu Features
Confirming/Editing the Selected Copy 
Features
Before copying, the settings can be checked, changed or deleted.
1Select “Confirm Settings”.
2Check the settings, and then select 
“Close”.
zIf “Confirm Settings” is selected, the setting 
screen is displayed, and the settings (except 
1 -> 1) can be changed.
zIf “Reset All” is selected, all the settings are 
cancelled.
zIf “Preset Jobs” is selected, the job 
registration screen is displayed to register 
jobs. Refer to the Storing a Job in Memory 
(see page 34).
Ex:Changing Sort mode to Shift-Sort mode 
when optional finisher is installed.
1Select “Sort”.
2Select “Non Sort”, and the select “OK”.
3Select “Close”. 
						

							34
 Chapter 1    Basic Menu Features
Storing a Job in Memor y
A copy job can be registered as a preset job. It is useful to register the frequently used settings as 
Preset jobs.
zRefer to the Recalling a Preset Job Stored in Memory (see page 35).
zOnce registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
zA proof copy job cannot be registered in the job memory. 
z“M1”/”M2” cannot be registered when Manual Skyshot Mode is selected. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) on the provided CD-ROM.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select the copy features (see pages 8 
to 33, and 40 to 89).
4Enter the desired number of copies.
5Select “Preset Jobs”.
6Select “Save”, and then select a job 
button that does not have a job 
registered.
zThe job button, in which a job has been 
registered, will have a job name.
7Input a job name, and then select 
“OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
zAfter completing the editing of the job name, 
press the Reset key to return to the initial 
screen of the current active mode. 
						

							35
 Chapter 1    Basic Menu Features
Recalling a Preset Job Stored in Memor y
The specific copy job will be done by recalling the registered preset jobs.
A job called “Double Exposure” is set as default.
Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.
zRefer to the Storing a Job in Memory (see page 34).
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “Preset Jobs”.
4Select a stored job.
zJob buttons without names, indicate that 
there are no jobs registered.
zIf the confirmation screen “Ready for M1 
Memory Copy” is displayed, select “Close”.
5To confirm the job settings, select 
“Confirm Settings”, and then touch 
“Close”.
zTo change the setting, refer to the 
Confirming/Editing the Selected Copy 
Features (see page 33).
6Press the Start key. 
						

							36
 Chapter 1    Basic Menu Features
Checking the Waiting to Copy Job
A list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can 
be displayed.
•All jobs
• Copy jobs
The pending waiting to print jobs can be deleted.
Displaying a List of All Jobs
A list of all the jobs currently being printed, or 
waiting to print can be displayed.
1Press the Copy key if the machine is 
set to other function mode.
2Select “Output Queue”.
Output Queue screen is displayed, and a list 
of all the jobs currently being printed, or 
waiting to print are displayed.
3Select “Close”.
Displaying a List of Copy Jobs
A list of copy jobs currently being printed, or 
waiting to print can be displayed.
1Select “Copy” in the Output Queue 
screen.
zA list of copy jobs currently being printed, or 
waiting to print is displayed.
2Select “Close”. 
						

							37
 Chapter 1    Basic Menu Features
Deleting Copy Jobs
The jobs in Ready status can be deleted.
1Select “Copy” in the Output Queue 
screen.
zTo display the Output Queue screen, refer to 
the Checking the Waiting to Copy Job 
(see page 36).
2Select a job, and then select “Delete”.
zWhen deleting all the jobs, select “Select 
All”, and then select “Delete”.
The screen to confirm the job deletion is 
displayed.
3Select “Ye s”.
Selected Copy Job is deleted.
4Select “Close”.
CopySelect when deleting a copy 
job.
PrintSelect when deleting a print 
job.
zRefer to the Operating 
Instructions (For PCL 
Printer Driver) provided 
on the CD-ROM. 
						

							38
 Chapter 1    Basic Menu Features
Completion Notice
If Completion Notice is set, you will be notified on your computer when copying is completed.
zBefore using this function, install the Panasonic Document Management System and PCL Printer Driver, 
and then configure each software.
zTo register the IP Address of your computer, refer to Network Scanner Settings (Option) and Completion 
Notice in the Operating Instructions (For Setting Up) of provided booklet.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select the copy features if necessary.
4Select “Completion Notice”.
5Select an index tab or “Favorites” to 
display the registered computers.
6Select a designated computer, and 
then select “OK”.
7Enter the desired number of copies.
8Select the Start key.
A completion notice will be sent to the 
specified computer when copying is 
completed.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							39
 Chapter 1    Basic Menu Features
Memo 
						

							40
 Chapter 2    More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
zFor information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, please refer to the Operating Instructions (For 
Basic Operations) on the provided booklet.
zThe standard setting of the 2-Sided / Original->Copy can be changed. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zSpecial paper such as cardboard cannot be used for 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
z2 -> 1, Multi-Size Feed, Job Build and 
SADF: From ADF only.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select the desired 2-Sided mode.
1 -> 1 : To clear the 2-Sided Copy Mode
2 -> 1 (see page 41)
2 Page (see page 42)
Booklet (see page 43)
Multi-Size Feed (see page 45)
zWhen “Multi-Size Feed” is selected, “1 -> 2” 
or “2->2” cannot be selected.
Job Build and SADF (see page 47)
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2 Modes
zRefer to the Operating Instructions (For 
Basic Operation) on the provided booklet.
5Enter the desired number of copies.
6Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.