Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

							51
 Chapter 2    More Menus Features
‰When the optional 1-Bin Saddle Stitch 
Finisher is installed.
Select the stapling position.
‰When the optional Punch Unit is installed 
to the 1-Bin Saddle Stitch Finisher.
Select the punching position.
‰When the optional 1-Bin Finisher is 
installed. Select the stapling position.
5Enter the desired number of copies.
6Press the Start key.
zWhen copying from the Platen Glass, place 
the next original and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
2 positions on the left side.
1 position on the upper left side.
2 positions on the upper side.
2 positions on the right side.
1 position on the upper right side.
1 position on the upper left 
side.
1 position on the upper 
right side. 
						

							52
 Chapter 2    More Menus Features
Zoom Mode
Variable Ratios
The original can be copied by setting the Enlargement/Reduction Ratio.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Zoom”.
5Select the item to enlarge/reduce.
When a reduction copy is selected, it is printed 
on the following position and size. 
XYSelect to set the same enlargement/
reduction ratio vertically, and 
horizontally.
XSelect to set the horizontal 
enlargement/reduction ratio.
YSelect to set the vertical enlargement/
reduction ratio.
ABC
100%
ABC
Ex. 50%
Ex.25% ABC
ABC
100%ABC
Ex. 50%
Ex.25% ABC
Place the original(s) on 
the ADF.Place the original on 
the Platen Glass. 
						

							53
 Chapter 2    More Menus Features
6Input the zoom ratio with “S” and “T”, 
or the keypad, and then select “OK”.
zThe ratio can be set in 1% increments from 
25% to 400%.
zWhen changing the paper size after setting 
the zoom ratio, touch “Basic Menu”, and 
then select “Paper/Output Tray”, and select 
the paper size.
7Enter the desired number of copies.
8Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode. 
						

							54
 Chapter 2    More Menus Features
Auto Zoom
By setting Auto Zoom, originals can be automatically Enlarged/Reduced to fit the size of the loaded 
paper.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by 
ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and then place the original on the 
platen, leaving it open.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Auto Zoom”.
Face Down. Align with top left 
corner. 
						

							55
 Chapter 2    More Menus Features
5Select the desired zoom/type ratio, 
and then select “OK”.
6Select the desired size of paper, and 
then select “OK”.
7Enter the desired number of copies.
8Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
Enlarged or reduced 
according to the vertical/
horizontal size of the paper.
Enlarged or reduced 
according to both vertical/
horizontal size of the paper. 
						

							56
 Chapter 2    More Menus Features
Effect Modes
Setting a Blank Edge
Unnecessary edge can be erased by setting a blank edge.
zWhen “Zoom” is selected, the erasing width varies depending on the zoom ratio.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Edge”. 
						

							57
 Chapter 2    More Menus Features
5Select “XY” to set the same value for X 
and Y, or “X”, “Y” to set a different 
value for X and Y.
6Input the erasing width with “S” and 
“T”, or the keypad, and then select 
“OK”.
zThe erasing width can be set in 1 mm 
increments from 5 mm to 99 mm.
7Enter the desired number of copies.
8Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display. 
(Only Sort setting)
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
XYSelect to set the same erasing width 
for all sides.
XSelect to set the erasing width for the 
right, and left sides.
YSelect to set the erasing width for the 
top, and bottom sides. 
						

							58
 Chapter 2    More Menus Features
Eliminate Dark Inner Binding Shadows
When copying original such as the center of folding position may be shaded. This shade can be easily 
eliminated.
zWhen “Zoom” is selected, the erasing width varies depending on the zoom ratio.
zWhen “Overlay” or “Form Overlay” is selected, this function cannot be executed for the overlay original.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Book”.
5Input the erasing width with “S” and 
“T”, or the keypad, and then select 
“OK”.
zThe erasing width can be set in 1 mm 
increments from 5 mm to 99 mm.
6Enter the desired number of copies.
7Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the touch panel display.
(Only Sort setting)
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
The shade is erased. 
						

							59
 Chapter 2    More Menus Features
Shift Image to Right, Left, Up or Down
The margin can be added on any 4 sides of the image with the image shifted to the right, left, up, or 
down accordingly.
zIf a part of the copied image is missing, change the Margin Reduction setting to Yes. Refer to Copier Settings 
in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
zWhen “Overlay” or “Form Overlay” is selected, the binding margin is also set for the overlay original.
zIf this setting is made when 2-Sided copying is selected, the print position comes out different between the 
front, and back sides of copy. 
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Margin”.
Margin Margin MarginMargin
Continue on the next page... 
						

							60
 Chapter 2    More Menus Features
5Select the desired position of the 
binding margin.
6Input the width of the binding margin 
with “S” and “T”, or the keypad, and 
then select “OK”.
zThe width of the binding margin can be set 
in 1 mm increments, from 5 mm to 99 mm.
7Enter the desired number of copies.
8Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current 
active mode.
Select to set the binding margin on 
the left side of the paper.
Select to set the binding margin on 
the right side of the paper.
Select to set the binding margin on 
the top side of the paper.
Select to set the binding margin on 
the bottom side of the paper.