Panasonic Digital Camera Dmc Zs60 Owners Manual For Advanced Features

							81
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Economy]
Turn off the camera or make the monitor go dark while not using the camera or i\
f no 
operation is performed for a preset period of time to minimize battery c\
onsumption.
 ■ZS100 [Sleep Mode]
The camera is automatically turned off if the camera has not been used for the time 
selected on the setting.
Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]
 • To restore →  Press the shutter button halfway, or turn the camera [

ON/OFF] switch to 
[OFF] and then turn it [ON] again
 ■ZS60 [Auto Power Off]
The camera is automatically turned off if the camera has not been used for the time 
selected on the setting.
Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]
 • To restore → Press the Camera [

ON/OFF] button
 ■[Auto LVF/Monitor Off]
The monitor is automatically turned off if the camera has not been used for the time 
selected on the setting.
Settings: [5 MIN.] / [2 MIN.] / [1 MIN.]
 •To restore →  Press any button or touch the monitor.
 ●This function is not available in the following cases: • During motion picture recording/playback • When recording with [  ]  ([4K Pre-Burst]) of the 4K Photo function •ZS100 When [Multi Exp.] is set • When connected to computer/printer • During Slide Shows • When using [T

ime Lapse Shot]
 • When [Auto Shooting

] of [Stop  Motion Animation ] is set to [ON]
 •ZS100 While the HDMI output is being used for recording ●ZS100When using the AC adaptor (optional) and DC coupler (optional), the [Sleep Mode] is disabled. ●ZS60When using the AC adaptor (optional) and DC coupler (optional), the [Auto Power Off] is disabled. ●When using the AC adaptor (optional) and DC coupler (optional), [Auto LVF/Monitor Off] is fixed to 
[5 MIN.]. 
SQW0547     
						

							82
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[USB Mode]
Select communication method for when connecting camera to a computer or \
printer with 
USB connection cable (supplied).
Settings
[Select on connection]Select communication method each time you connect to a computer 
or PictBridge-compatible printer.
[PictBridge(PTP)]
Select when connecting to a PictBridge-compatible printer.
[PC]
Select when connecting to a computer.
[TV Connection]
Change the settings to be used when the camera is connected to a TV or other device.
 ■[HDMI Mode (Play)]
Set the format for the HDMI output when playing back on the HDMI compati\
ble high-
definition TV connected with this unit using the HDMI micro cable.
Settings
[AUTO]
Automatically sets the output resolution based on information from a 
connected TV.
[4K] Outputs pictures with a resolution of 3840×2160 pixels using a progre\
ssive 
scan method for the number of effective scanning lines (2,160 lines).
[1080p] Outputs pictures using a progressive scan method for the number of effective 
scanning lines (1,080 lines).
[1080i] Outputs pictures using an interlace scan method for the number of effective 
scanning lines (1,080 lines).
[720p] Outputs pictures using a progressive scan method for the number of effective 
scanning lines (720 lines).
[480p] Outputs pictures using a progressive scan method for the number of effective 
scanning lines (480 lines).
 ●If no image appears on the TV with [AUTO], switch the setting to a constant setting other than 
[AUTO] to set a format supported by your TV. (Please read the operating instructions for the TV.) 
SQW0547     
						

							83
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[TV Connection] (continued)
 ■ZS100 [HDMI Info Display (Rec)]
Set whether or not to display information when recording a picture on th\
e camera while 
monitoring it on a TV, etc., connected to the camera via an HDMI micro cable.
Settings
[ON] The camera display is output as is.
[OFF] Only images are output.
 ■[VIERA Link]
Enable automatic linking with other VIERA Link-compatible devices, and operability with 
a VIERA remote control when connecting via an HDMI micro cable.  (→350)
Settings
[ON] Operations may be performed via the remote control of the VIERA Link-compatible 
device. • Not all operations will be available. • Operability of the camera’s own buttons will be limited.
[OFF] Operations must be performed via the camera’

s own buttons. 
SQW0547     
						

							84
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[m/ft]
Select how distance is displayed, in Ft or M.
Settings: [
  ] / [  ]
[Menu Resume]
Save the last operated menu position.
Settings: [ON] / [OFF]
[Menu Background]
Set the background color for the menu screen.
[Menu Information]
Explanations of the menu items and settings are displayed on the menu sc\
reen.
Settings: [ON] / [OFF]
[Language]
Change display language.
Set the language displayed on the screen.
 • If you set a different language by mistake, select [  ] from the menu icons to set the 
desired language. 
SQW0547     
						

							85
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Version Disp.]
Check the firmware version of the camera.
 ●When you press [MENU/SET] while the version is displayed, software infor\
mation for this unit, 
such as the license, is displayed.
[Exposure Comp. Reset]
If the recording mode is changed or the camera is turned off, the exposure compensation 
(brightness) setting is reset.
Settings: [ON] / [OFF]
[Self Timer Auto Off]
The self-timer is canceled if the unit is turned off.
Settings: [ON] / [OFF]
[No.Reset]
Reset picture file numbers. (The folder number is updated and the file \
number starts from 
0001.)
 • To reset folder number to 100:

 
First, format the card, and reset the file numbers using [No.Reset]. Then, select [Ye s ] 
on the folder number reset screen.
 ●A folder number between 100 and 999 can be assigned.  
Numbers cannot be reset once folder number reaches 999. In this case, sa\
ve all necessary 
pictures to your computer, and format the card (→38). 
SQW0547     
						

							86
Basics
Using the [Setup] menu
For details on how to select the [Setup] menu settings, refer to (→65).
[Reset]
The following settings are reset to the default: – Recording settings (except for [Face Recog.] and [Profile Setup
] settings) and drive 
mode
 – Recording settings ([Face Recog.] and [Profile Setup

] settings)
 – Setup/custom settings
 ●When the setup/custom settings are reset, the following settings are als\
o reset: • The [World Time] setting
 • The [T

ravel Date] setting (Departure date, Return date, [Location])
 • The settings of [Rotate Disp.] and [Picture Sort] in the [Playback] menu\
 ●Folder numbers and clock settings will not be reset.
[Reset Wi-Fi Settings]
Returns [Wi-Fi] settings to default settings.
(Excluding [LUMIX CLUB])
[Demo Mode]
You can try focusing, peaking, etc. in [Post Focus], with the image pictu\
re.
[Format]
Format (initialize) a memory card.  (→38) 
SQW0547     
						

							87
Basics
Entering Text
Use the cursor button to enter names with the Face Recognition function \
and in [Profile 
Setup] (babies and pets), or to register locations in [Travel Date] etc.
 • Example of operation for displaying a screen: →  [Rec] → [Profile Setup ] → [SET] → [ Baby1] → [Name] → [SET]
1Use     to select characters
2Press [MENU/SET] several times until the 
desired character is displayed
 • [  ]: Enter a blank.
 ■To change the character type
 • Press [DISP

.] button
 • Use     to select [  ] and press [MENU/SET]
 ■To continue entering characters
 • Use     to select [  ] and press [MENU/SET] • Move the zoom lever toward T side
 •ZS100Rotate the rear dial counterclockwise. •ZS60Rotate the control dial clockwise.
 ■To edit text
Use     to select [  ]  [  ] and press [MENU/SET].  Then, move the 
cursor to the text to edit
 •ZS100You can also use the zoom lever or rear dial to reposition the cursor. •ZS60You can also use the zoom lever or control dial to reposition the cursor.Use     to select [Delete] and press [MENU/SET]Use     to select the correct text, and press [MENU/SET]
3When you are finished entering text, use     to select 
[Set] and press [MENU/SET]
 ●Only alphabetical characters and symbols can be entered. ●A maximum of 30 characters can be entered (maximum of 9 characters when \
setting names in 
[Face Recog.]).
 ●A maximum of 15 characters can be entered for [  ],  [  ], [  ], [  ] and [  ] (maximum of 
6 characters when setting names in [
Face Recog.]). 
SQW0547     
						

							88
Recording modeTaking pictures with automatic settings   
(Intelligent Auto Mode)
Recording mode: 
This mode is recommended for those who want to point and shoot as the ca\
mera 
optimizes settings to match the subject and recording environment.
(○: Available, –: Not available)
 Intelligent Auto Plus Mode Intelligent Auto Mode
Defocus control 
function ○
○
Setting the brightness 
(exposure) ○
–
Setting the color tone ○–
Menus that can be set (→96)
1Set mode dial to [  ]
 •The camera will switch to either the most recently used 
of Intelligent 
Auto Mode or Intelligent Auto Plus Mode. 
(→95)
Following are the settings in effect at time of purchase.
ZS100: Intelligent Auto Plus ModeZS60: Intelligent Auto Mode
ZS100
ZS60
2Point the camera at the subject
 • When the camera identifies the optimal scene, the  icon for each scene turns blue for 2 seconds and then 
changes to the normal red indication.  
(Automatic Scene Detection)60p 
SQW0547     
						

							89
Recording mode
Taking pictures with automatic settings  (Intelligent Auto Mode) 
Auto Focus, Face/Eye Detection, and Face Recognition
[AF Mode] is automatically set to [  ]. If you touch the subject, the camera switches to 
[  ] and the AF tracking function starts operating.
Y
ou can also switch to [  ] by pressing [MENU/SET], going to the [Rec] menu, then 
going to the [AF Mode] menu and selecting [  ] (tracking). Align the  AF tracking area with 
the subject and press the shutter button halfway to operate the AF tracking function.  
For details about AF tracking, refer to (→151).
 • In [  ],  [  ], and [  ], the camera adjusts the focus on the eye that is closest to this 
unit and matches the exposure with the face. In Intelligent Auto Plus Mode or Intelligent 
Auto Mode, the eye to be focused on cannot be changed.  (Face/Eye Detection)
 • Automatic Scene Detection does not function until the focus is locked on\
 a subject 
during AF T

racking.
 • When [Face Recog.] 

(→226) is set to [ON] and if the camera recognizes a face similar 
to a registered face, [R] is displayed on the upper right corner of the \
[
  ],  [  ],  and 
[  ]  icons. 
SQW0547     
						

							90
Recording mode
Taking pictures with automatic settings  (Intelligent Auto Mode) 
Flash
ZS100When the flash is open, the camera automatically sets [  ],  [  ]  (Auto/Red-Eye 
Reduction), [  ], or [  ] based on the type of subject and brightness.
ZS60When  is pressed and [  ] (i auto) selected, the camera will automatically be set to 
[  ],  [  ] (Auto/Red-Eye Reduction), [  ], or [  ], depending on the type of subject 
and brightness.
 ●When [  ] or [  ] is displayed, the [Red-Eye Removal ] function is activated to automatically 
detect red-eye and correct the picture data.
 ●When [  ] or [  ] is selected, the shutter speed is reduced.
Automatic Scene Detection
When taking pictures
[i-Portrait][i-Scenery][i-Macro][i-Night Portrait]*1
[i-Night Scenery][i-Handheld Night 
Shot]*2[i-Food][i-Baby]*3
[i-Sunset]When scene does not correspond to any of the above
*1   Displayed only when using flash.*2   When  [iHandheld Night Shot] is [ON].  (→91)*3   When children (that are registered in the camera with Face Recognition)\
 under 3 years old are 
recognized.
 • When the camera identifies [  ] as the optimal scene and if the camera determines 
that jitter is reduced by the use of a tripod or by other means, a shutt\
er speed that 
is slower than usual is selected. 
After pressing the shutter button, do not move the 
camera while recording.
 • When recording 4K photos or when recording using [Post Focus], Scene Detection  works the same way as when recording motion pictures.
When recording motion pictures
[i-Portrait][i-Scenery][i-Low Light][i-Macro]
When scene does not correspond to any of the above
 ●Depending on recording conditions, different scene types may be determined for the same 
subject. 
SQW0547