Panasonic Digital Camera Dmc Zs60 Owners Manual For Advanced Features

							191
Recording 4K Photos
Recording 4K Photos

Position of the 
displayed frame
Operation Touch operation Description
ZS100  Touch → DragSelects a frame • You can select a frame from 60 frames 
(continuous burst time of approximately 2 
seconds).
ZS60 
Select   with    → [MENU/SET] 
Displays the previous or next frames in slide view • The previous or next 45 frames (burst time of approximately 1.5 seconds) will replace 45 of the 
frames that are currently displayed in slide view.
 • Pressing the same button again will display the frames following the next ones or the ones 
preceding the previous ones.
—
Touch / Drag Selects the frames to be displayed • Frames preceding and following the selected 
frame will be displayed in slide view.
Pinch out / Pinch in Enlarges/reduces the display
   Drag
Moves the enlarged area (during enlarged display)
[Fn2]
Displays the 4K burst playback screen
[Fn1]
Switches to marker operation  
([  ]  ([4K Burst(S/S)]) only)
[MENU/SET]
Saves the picture
 •If the burst time was short, a smaller number of frames are displayed in\
 slide view. [  ] and [  ] 
cannot be selected. 
SQW0547                    
						

							192
Recording 4K Photos
Recording 4K Photos
 •During marker operation, you can skip to the markers that you added or t\
he beginning or end of 
the 4K burst file. Press [Fn1] button again to return to the original op\
eration.
Operation Touch operationDescription
Moves to the next marker.
Moves to the previous marker.
 •When you have selected frames that are not currently displayed in slide \
view, such as when you 
have selected [  ] or [  ], it may take a few seconds until the slide view frames are displayed. 
SQW0547     
						

							193
Recording 4K Photos
Recording 4K Photos

During pause During continuous playback
Operation Touch operationDescription
Continuous playback
Continuous rewind • Frames are rewound in approximately 0.5 second 
intervals at a faster speed than that of continuous 
playback.
 Pause (during continuous playback/rewind)
ZS100 Fast forward playback
Single-frame forward (while paused)
ZS60 Fast rewind playback
Single-frame rewind (while paused)
—
Touch / Drag Selects the frames to be displayed (while paused)
Pinch out / 
Pinch in Enlarges/reduces the display (while paused)
   Drag
Moves the enlarged area (during enlarged display)
[Fn2]
Displays the slide view screen (while paused)
[Fn1]
Switches to marker operation  
([  ]  ([4K Burst(S/S)]) only)
[MENU/SET]
Saves the picture (while paused)
3Press [MENU/SET] to save the picture • Pause the playback to perform this operation when using the 4K burst pla\
yback screen. 
SQW0547                               
						

							194
Recording 4K Photos
Recording 4K Photos
4K burst files recorded with [  ]  ([4K Pre-Burst])
1Select a 4K burst file on the playback screen, and 
press 
 • [  ] is displayed on a 4K burst file. • The same operation can be performed by touching [  ]. • The slide view screen for selecting pictures will be displayed. It takes a few seconds until the screen is displayed.
2Touch and drag the frames to select the frame you 
want to save as a picture
 • You can also perform the same operation by pressing  .
Operation Touch operation Description
ZS100  Touch / DragSelects a frameZS60 
Pinch out /  
Pinch in Enlarges/reduces the display
   Drag
Moves the enlarged area (during enlarged display)
[MENU/SET]
Saves the picture
3Press [MENU/SET] to save the picture 
SQW0547         
						

							195
Recording 4K Photos
Recording 4K Photos
 ■Selecting and saving pictures on the TV screen
Preparation
Set [HDMI Mode (Play)] (→82) to [AUTO] or [4K].
 • When connecting to a TV that does not support 4K motion picture, select [AUT
O].
Connect this unit to a TV using an HDMI micro cable and display the playback 
screen (→348)
 • If you want to select and save pictures while the camera is connected to\
 a TV with the HDMI micro cable, set [VIERA  Link] of [TV Connection] in the [Setup] menu to [OFF].
 • If you connect the camera to a TV with an HDMI micro cable and display 4K burst files on the TV

, they will be displayed only on the 4K burst playback screen.
The 4K burst playback screen for playing back 4K burst files recorded wi\
th [
  ]  ([4K Burst]) or 
[  ]  ([4K Burst(S/S)]) is displayed, and the slide view screen is not displayed. • Even if you insert the SD card to a 4K-compatible TV with an SD card slot, you cannot play  back 4K burst files recorded with [
Aspect Ratio] set to an option other than [16:9].  
To play them back, connect the camera and a 4K-compatible TV with an HDMI micro cable. 
(As of January 2016)
 ●If you display the playback screen when the camera contains many picture\
 files, the acquiring 
information icon [  ] or [  ] may be displayed for a long time. In this case, you 
cannot 
play back 4K burst files recorded with the 4K Photo function. Wait until the icon disappears.
 ●If you touch the slide view screen or 4K burst playback screen twice, th\
e screen will be enlarged. 
To return to the original display, touch the enlarged screen twice.
 ●To select and save pictures from 4K burst files on a PC, use the software\
 “PHOTOfunSTUDIO”. 
Download the software from the website  (→353) and install it on your PC. Please note that it is not 
possible to edit a 4K burst file as a motion picture.
 ●4K burst files recorded on other devices may not be played back correctl\
y on this unit. 
SQW0547     
						

							196
Recording 4K Photos
Recording 4K Photos
Notes on the 4K Photo function
 ■To change the aspect ratio
Selecting [Aspect Ratio] in the [Rec] menu allows you to change the aspe\
ct ratio for 4K 
photos.
 ■To record the subject with reduced blur
You can reduce the blur of the subject by setting a faster shutter speed.\
Set mode dial to [  ]ZS100Set the shutter speed by rotating the rear dialZS60Set the shutter speed by rotating the control dial
 • Approximate shutter speed for outdoor recording in fine weather conditio\
ns: 1/1000 seconds or faster.
 • If you increase the shutter speed, the ISO sensitivity becomes higher, which may increase the noise on the screen.
 ■Shutter sound for 4K photo recording
When using [
  ]  ([4K Burst]) or [  ]  ([4K Pre-Burst]), recording is performed with the 
electronic shutter. 
You can change the electronic shutter sound settings in [Shutter Vol.] 
and [Shutter Tone]. (→78)
When recording with [
  ]  ([4K Burst(S/S)]), you can set the start/stop tone volume in 
[Beep V
olume].
 • You can perform high speed burst recording quietly using the 4K Photo fun\
ction in  combination with [

Silent Mode].
 ■Scenes not suitable for the 4K Photo function
Recording indoors
When recording under fluorescent lighting or LED lighting fixtures, etc.\
, the colors and 
brightness may change or horizontal striping may appear on the screen. The striping 
may be reduced by setting a slower shutter speed.
Fast-moving subjects
Subjects moving fast may appear distorted when recorded. 
SQW0547     
						

							197
Recording 4K Photos
Recording 4K Photos
 ■Limitations on the 4K Photo function
To optimize settings for 4K photo recording, certain limitations apply to\
 some recording 
functions, menu items and other settings.
 • The following settings are fixed.
[Picture Size][4K] (8M) • Following picture sizes will be applied:
[4:3]: 3238×2496 [3:2]: 3504×2336
[16:9]: 3840×2160 [1:1]: 2880×2880
[Quality] [
  ]
[Shutter T
ype] [ESHTR]
[Rec Format]
*[MP4]
[Rec Quality]
*[4K/100M/30p]
[Continuous AF]
*[ON]
*  Settings in the [Motion Picture ] menu are not applied to 4K burst files recorded with the 4K 
Photo function.
 • The following limitations apply to the recording functions indicated bel\
ow.
[  ]  ([4K Burst])/
[  ]  ([4K Burst(S/S)]) [  ]  ([4K Pre-Burst])
Program Shift –
Exposure compensation –3 EV to +3 EV
Shutter speed 1/30 to 1/16000
[AFS/AFF/AFC] AFS
ZS100[AF Mode] ([  ])–
[MF Assist
] ○–
White Balance ([
  ]),
White Balance Bracket –
ISO sensitivity
ZS100 [AUTO], 125 to 6400ZS60 [AUTO], 80 to 3200
Flash – 
SQW0547     
						

							198
Recording 4K Photos
Recording 4K Photos
 • The following menu items are disabled:Applicable to [  ]  ([4K Burst])/[  ]  ([4K Burst(S/S)])/[  ]  ([4K Pre-Burst])
[Rec] [Picture Size], [Quality], [AFS/AFF/AFC], [iHandheld Night Shot], [iHDR], 
[HDR], [Panorama Settings], [ Shutter Type], [Flash]*1, [Flash Adjust.]*2, 
[Extended ISO], [Long Shtr NR]*1, [Color Space]*1, [Face Recog.], [Profile 
Setup]
[Custom] [Rec Area]
*1 ZS100*2 ZS60
Only [  ]  ([4K Pre-Burst])
[Setup][Economy]
 ●The following changes occur when recording 4K photos: • The [i.Resolution
] setting changes from [EXTENDED] to [LOW].
 • [Destination

] in [Travel Date] cannot be recorded.
 • [Simultaneous record w/o filter

] is not available.
 • It is not possible to use the HDMI output. ●When recording using the [  ]  ([4K Pre-Burst]) function, Step Zoom does not operate. ●Scene Detection in Intelligent Auto Mode works the same way as when recording motion pictures. ●The 4K Photo function is disabled when using the following settings: • [Clear in Backlight], [Glistening Water], [Artistic Nightscape], [Glittering Illuminations], [Handheld 
Night Shot], [Clear Night Portrait], [Soft Image of a Flower] (Scene Guide Mode)
 • [Rough Monochrome

], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter], 
[Sunshine] (Creative Control Mode)
 • When recording using [Post Focus] • During motion picture recording •ZS100 During T (Time) recording •ZS100 When [Multi Exp.] is set • When using [T ime Lapse Shot]
 • When using [Stop 

Motion Animation ] 
SQW0547     
						

							199
Shutter and Drive SettingsSetting the Shutter Type
Recording mode: 
You can take pictures using two types of shutter modes: the mechanical sh\
utter and 
electronic shutter.
Mechanical shutter Electronic shutter
Description Starts the exposure electronically 
and ends the exposure using the 
mechanical shutter. Starts and ends the exposure 
electronically.
Flash ○–
Shutter Speed 
(seconds)
ZS100T (Time)*1,
60 - 1/2000ZS1001 - 1/16000
ZS604*2 - 1/2000ZS601*2 - 1/16000
Shutter sound Mechanical shutter sound
*3
+
Electronic shutter sound*4Electronic shutter sound*4
*1   This setting is available only in Manual Exposure Mode.  (→103)*2   Varies depending on the setting of ISO sensitivity. (→179)*3   You cannot turn off the mechanical shutter sound.*4   You can use [Shutter Vol.] and [Shutter Tone] to adjust the volume of the electronic shutter sound. 
(→
78)
1Set the menu
 →  [Rec] → [Shutter Type]
[AUTO] The shutter mode automatically switches based on the recording condition\
s 
and shutter speed. • The mechanical shutter mode has higher priority over the electronic 
shutter mode because the mechanical shutter has less function-related 
restrictions when recording with a flash, etc.
[MSHTR] Uses only the mechanical shutter mode to take a picture.
[ESHTR] Uses only the electronic shutter mode to take a picture. 
SQW0547   
						

							200
Shutter and Drive Settings
Setting the Shutter Type
 ●In the following cases, recording is performed with an electronic shutte\
r. • [  ] is displayed on the screen • When [Burst Rate] is set to [SH]
 • When recording 4K photos • When recording using [Post Focus] • When [Silent Mode

] is set to [ON]
 ●If you take a picture of a moving subject using the electronic shutter, the subject in the 
picture may be skewed in some cases.
 ●When you take a picture under a fluorescent or LED lighting fixture usin\
g the electronic 
shutter, the recorded picture may have horizontal stripes. If you use a slower \
shutter 
speed, the horizontal stripes may be reduced.  (→102) 
SQW0547