Panasonic Digital Camera Dmc Zs60 Owners Manual For Advanced Features

							281
Playing Back and Editing Pictures
Using the [Playback] menu
 ■To change settings such as music or display time
Select [Effect] or [Setup] and press [MENU/SET].
[Effect][AUTO] / [NATURAL] / [SLOW] / [SWING] / [URBAN] / [OFF]
[Setup] [Duration] [5SEC] / [3SEC] / [2SEC] / [1SEC]
[Repeat] [ON] / [OFF]
[Sound] [AUTO]: 
 With still pictures, music will play back, and with motion 
pictures, audio will play back.
[Music]: Music ef

fect will play back.
[Audio]: Audio is played back from motion pictures.
[OFF]: Music and audio will not play back.
 ●When [URBAN] has been selected, the picture may appear in black and whit\
e as a screen effect. ●[AUTO] can be used only when [Category Selection] is selected. The pictures are played back with 
the recommended effects for each category.
 ●[Effect] is fixed to [OFF] when in [Video Only], or during the slide show for [  ],  [  ], or [  ]  in 
[Category Selection
].
 ●During slide shows of 4K photo burst files, pictures recorded in [Post Focus], or group pictures, 
effects will stay turned off even if [Effect] is set.
 ●When you play back the following pictures in a slide show, the [Duration] setting is disabled. • Motion pictures • 4K burst files • Pictures recorded using [Post Focus] • Panorama pictures • Group pictures ●[Duration] can be set only when [Effect] is set to [OFF]. ●Part of [Effect] cannot be used when displaying pictures on television using an HDM\
I micro cable 
or when displaying pictures recorded in portrait position.
[Playback Mode]
Recorded pictures can be played back in a variety of ways.
1Set the menu
 →  [Playback] → [Playback Mode]
2Use   to select the item and press [MENU/SET] • If you select [V ideo Only], 4K burst files recorded with the 4K 
Photo function and pictures recorded using [Post Focus] will also 
be played back. 
SQW0547     
						

							282
Playing Back and Editing Pictures
Using the [Playback] menu
When selecting [Category Play] in step 2 (→281)
3Use     to select the category and press [MENU/SET] • The available categories are as follows.
[Face Recog.]*
[i-Portrait], [i-Night Portrait], [i-Baby] in Automatic Scene Detection
[Clear Portrait], [Silky Skin], [Backlit Softness], [Clear in Backlight], [Relaxing Tone], 
[Sweet Child’s Face], [Clear Night Portrait] (Scene Guide Mode)
[i-Scenery], [i-Sunset] in Automatic Scene Detection
[Distinct Scenery], [Bright Blue Sky], [Romantic Sunset Glow], [Vivid Sunset Glow], 
[Glistening Water] (Scene Guide Mode)
[i-Night Portrait], [i-Night Scenery], [i-Handheld Night Shot] in Automatic Scene 
Detection
[Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Artistic Nightscape], 
[Glittering Illuminations], [Handheld Night Shot], [Clear Night Portrait] (Scene Guide 
Mode)
[Clear Sports Shot] (Scene Guide Mode)
[i-Food] in Automatic Scene Detection
[Appetizing Food], [Cute Dessert] (Scene Guide Mode)
[Travel Date]
A burst of pictures recorded by setting the burst speed to [SH]
[Time Lapse Shot], [Time Lapse Video]
[Stop  Motion Animation ], [Stop Motion Video]
*   Use     to select a person to be played back and press [MENU/SET]. Face Recognition is 
applied for all the pictures in the group.
 ●The category for recording motion pictures is different from the category of still pictures used in 
some Recording modes. For that reason, the pictures may not be played ba\
ck. 
SQW0547     
						

							283
Playing Back and Editing Pictures
Using the [Playback] menu
[Location Logging]
After you send location information (latitude and longitude) obtained \
by your smartphone/
tablet to this unit, you can write this information on pictures using th\
e unit.
Preparation
Send location information to this unit from your smartphone/tablet. (→314)
 • You must install “Panasonic Image 

App” on your smartphone/tablet. (→305)
1Set the menu
 →  [Playback] → [Location Logging ] → [Add Location Data]
2Use   to select a period for writing location information, and press  
[MENU/SET]
 • [  ] is displayed for pictures that have location information written to it.
 ■Abort writing location information
Press [MENU/SET] while location information is being written • [  ] is displayed for the period of the abort operation.  
If selected again while [  ] is displayed, writing location information will resume where it left of f.
 ■Delete received location information
Use   to select [Delete Location Data] and press [MENU/SET]Use   to select a period for deleting location information, and press [MENU/SET]
 ●The location information cannot be written in the following cases: • Pictures that were recorded after you sent the location information  (→314) • Pictures that already have location information • Motion pictures recorded in [AVCHD] format • Protected pictures • If there is not enough free space on your card • Card switch is in “LOCK” position. • Pictures recorded using cameras other than this unit
Writing the location information using a smartphone/tablet
When you use your smartphone/tablet as a remote controller for this unit\
, you can write 
the location information on pictures using the smartphone/tablet. (→315) 
SQW0547     
						

							284
Playing Back and Editing Pictures
Using the [Playback] menu
ZS100 [RAW Processing]
You can use the camera to develop still pictures that were recorded in RA\
W format. The 
created still pictures are saved in JPEG format.
1Set the menu
 →  [Playback] → [RAW Processing]
2Press   to select RAW file and press [MENU/SET]
3Press   to select the item
 • The following items can be set. The settings used during recording are applied at the time of setting.
[White Balance] You can select White Balance to make adjustments. When you select an 
item with [  ], you can develop the pictures using the same settings that 
were applied for recording.
[Exposure Comp.] Y
ou can perform Exposure Compensation in the range from –1 EV to 
+1
 EV

.
[Photo Style] You can select the [Photo Style] effects ([Standard], [Vivid], [Natural], 
[Monochrome], [Scenery], or [Portrait]).
[i.Dynamic] You can select the [i.Dynamic] settings ([HIGH], [STANDARD], [LOW], or 
[OFF]).
[Contrast] You can adjust the contrast.
[Highlight] You can adjust the brightness of a highlighted area.
[Shadow] You can adjust the brightness of a shadowed area.
[Saturation] / 
[Color Tone] You can adjust the saturation. (You can adjust the coloring when 
[Monochrome] is selected for [Photo Style].)
[Filter Effect] You can select a Filter effect. (Only when [Monochrome] is selected for 
[Photo Style].)
[Noise Reduction] You can set noise reduction.
[i.Resolution] You can select the [i.Resolution] settings ([HIGH], [STANDARD], [LOW], 
[EXTENDED], or [OFF]).
[Sharpness] You can adjust the impression of resolution.
[Setup] You can perform the following settings.
[Reinstate Adjustments]:
 

 
You can restore the settings to the ones used 
during recording.
[Color Space]:
 

 
You can select [Color Space
 ] from either [sRGB] or 
[AdobeRGB].
[Picture Size]:
 

 
You can select the picture size ([
 L], [M], or [S]) of a JPEG 
file when saving pictures.
4Press [MENU/SET] to set • The setting methods vary depending on the item. For details, refer to “\
Setting each item”  (→285) . 
SQW0547     
						

							285
Playing Back and Editing Pictures
Using the [Playback] menu
5Press [MENU/SET] • The screen in step 3 reappears. To set another item, repeat steps 3 to 5.
6Press   to select [Begin Processing] and press [MENU/SET]
 ■Setting each item
When you select an item, the setting screen appears.
OperationTouch 
operation Description
 Drag
Used to make adjustments
[WB K Set] Used to display the color 
temperature setting screen 
(→136)
(Only when [White Balance] is set 
to [
  ])
[Adjust.] Used to display the White Balance 
fine adjustment screen 
(→137)
(Only when [White Balance] is set)
[DISP.] [DISP.] Used to display the comparison 
screen
[MENU/SET] [Set] Used to finalize an adjustment you 
just made and to return to the item 
selection screen
SetSet
SetSet
 • If you have selected [Noise Reduction
], [i.Resolution], or [Sharpness], the 
comparison screen is not displayed.
 • Pictures can be enlarged by operating the zoom lever. • You can also zoom in by quickly touching the touch screen twice. (If the\
 display was  enlarged, it returns to the same magnification ratio.)
The following operating methods are available to make adjustments on the\
 comparison 
screen.
Operation Touch 
operation Description
 Drag
Used to make adjustments
[DISP.] [DISP.] Used to return to the setting screen
[MENU/SET] [Set] Used to finalize an adjustment you 
just made and to return to the item 
selection screenSetSet
Current setting
 • If you touch the picture at the center, it will be enlarged. If you touch [  ], the picture 
will be reduced to the original size. 
SQW0547                    
						

							286
Playing Back and Editing Pictures
Using the [Playback] menu
When [Setup] is selected
When you select an item, the screen for selecting [Reinstate Adjustments], [Color 
Space], or [Picture Size] is displayed.
Use   to select the item and press [MENU/SET] • When [Reinstate Adjustments ] is selected, confirmation screen is displayed. When you select 
[Ye s ], the item selection screen reappears.
Use   to select the setting and press [MENU/SET]
 ●The result of a RAW file developed by this camera and a RAW file developed by the software 
“SILKYPIX Developer Studio SE”  (→354) will not be exactly the same.
 ●Regardless of the aspect ratio of the picture during recording, a RAW image recorded on this 
camera is always recorded with the aspect ratio set to [3:2] (5472×3648), but if you perform [RAW 
Processing] from the [Playback] menu, the picture will be processed with the aspect ratio fixed as 
that at the time of recording.
 ●The range that can be set using Exposure Compensation varies from the ra\
nge used during 
recording.
 ●The [White Balance] setting of still pictures recorded using [Multi Exp.] is fixed to the setting used 
during recording.
 ●When an HDMI micro cable is connected, [RAW Processing] is disabled. ●You can perform RAW processing on pictures recorded using this unit only. [RAW Processing] 
cannot be used for pictures recorded on other devices or for pictures re\
corded in formats other 
than the RAW format. 
SQW0547     
						

							287
Playing Back and Editing Pictures
Using the [Playback] menu
[Light Composition]
Select multiple frames from 4K burst files recorded in 4K Photo mode (→184) that you 
wish to combine. Parts of the image that are brighter than the preceding\
 frame will be 
superimposed on the preceding frame to combine the frames into one pictu\
re.
1Set the menu
 →  [Playback] → [Light Composition]
2Using  , select the 4K photo burst files and press [MENU/SET]
3Choose the combining method and press [MENU/SET]
 ■When [Composite Merging] is selectedSelect the frames you wish to combine, and then camera superimposes brig\
hter parts of the 
image.
Select the framesFor button and touch operation, refer to  (→193). • Images displayed cannot be enlarged or shrunk or shown 
as in slide view
 • [  ] in touch operation becomes [  ].
Press [MENU/SET]The selected frames are remembered, and the display goes 
to the preview screen.
Use 
  to select items and press [MENU/SET] to perform 
the following operations.
 – [Next]: 

 
Lets you select more frames for combining. Goes 
back to step . – [Reselect]: 
 Discards the frame selected immediately before 
and lets you select a dif
ferent image.
 – [Save]: Ends frame selection.
Next
Reselect
Save
Preview
Preview
Repeat steps  -  to select more frames to combine • You can select up to 40 frames.Press  to select [Save], and then press [MENU/SET] 
SQW0547                 
						

							288
Playing Back and Editing Pictures
Using the [Playback] menu
 ■When [Range Merging] is selectedSelect the first and last frames, and the brighter parts of frames withi\
n that range will be 
superimposed.
Select the frame of the first pictureThe selection method is the same as in step  when selecting [Composite Merging].Press [MENU/SET]The position of the first picture will be remembered.Select the frame of the last picture
Press [MENU/SET]The position of the last picture will be remembered.
4Select [Ye s] at the confirmation screen and press [MENU/SET]The combined picture is displayed. • Pictures are saved in JPEG format. Recording information (Exif informat\
ion) such as shutter 
speed, aperture, and ISO sensitivity are also registered. 
SQW0547     
						

							289
Playing Back and Editing Pictures
Using the [Playback] menu
[Clear Retouch]
You can erase unnecessary parts recorded 
on the pictures taken.
 • The erasure operation can only be performed by touching. [Clear Retouch] 
automatically enables the touch 
operation.
1Set the menu
 →  [Playback] → [Clear Retouch]
2Use   to select a still picture and press [MENU/SET]
SetSetUndoUndo
SCALINGSCALING
REMOVE REMOVE
3Drag your finger over the part you want to erase • The parts to be erased are colored. • Touching [
Undo] will return the colored part back to its previous 
state.
Erasing details (enlarging the display)
SetSet
UndoUndo
SCALING
SCALING
REMOVE
REMOVETouch [SCALING] • On the touch screen, pinch out your two fingers to zoom in, 
and pinch in your two fingers to zoom out  (→61)
.
 • You can also zoom in/out with the zoom lever

.
 • Dragging the screen allows you to move the enlarged part.Touch [REMOVE] • This will bring you back to the operation of dragging your finger over the part you want to erase. The part you want to erase can be dragged even while the picture is enlarged.
4Touch [Set]
5Touch [Save] or press [MENU/SET]
 ●Pictures may appear unnatural because the background of deleted parts is\
 artificially created. ●For group pictures, perform [Clear Retouch] on each picture. (They cannot be edited at once.) ●When [Clear Retouch] is performed on group pictures, they are saved as new pictures separat\
e 
from the original ones.
 ●Not available when the viewfinder is in use. ●This function is not available in the following cases: • Panorama pictures • Motion pictures • 4K burst files • Pictures recorded using [Post Focus] • Still pictures recorded with the [Quality] setting [  ] 
SQW0547                  
						

							290
Playing Back and Editing Pictures
Using the [Playback] menu
[Title Edit]
You can enter characters (titles etc.) on a recorded picture. After text has been registered, 
it can be stamped in prints using [Text Stamp] (→291).
1Set the menu
 →  [Playback] → [Title Edit] → [Single] or [Multi]
2Select a still picture (→279) • [  ] is displayed for pictures with texts already stamped.
3Enter characters (Entering text (→87)) • To delete texts, delete all the characters in the character input screen.\
 ●You can print out texts using the “PHOTOfunSTUDIO” software (→353). ●You can set up to 100 pictures at one time with [Multi]. ●This function is not available in the following cases: • Motion pictures • 4K burst files • Pictures recorded using [Post Focus] • Still pictures recorded with the [Quality] setting [  ],  [  ] or [  ] 
SQW0547