Panasonic Digital Camera Dmc Zs60 Owners Manual For Advanced Features

							3 11
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■When connecting with [Direct]
(On the camera)
Select [Direct] and press [MENU/SET] • Select [Wi-Fi Direct] or [WPS Connection]*, and connect the camera to the smartphone by 
following the connection method  (→341).
*  WPS refers to a function that allows you to easily configure the setting\
s related to the 
connection and security of wireless LAN devices. 
To check if the smartphone you are using is 
compatible with WPS, refer to the instruction manual of the smartphone.
(On your smartphone)Start  “Image App”  (→305)
Closing the connection
(On the camera)
1On the recording standby screen, terminate the connection from the menu \
of 
the camera
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [Ye s]
 • You can also terminate the connection by pressing [Wi-Fi] button on the camera (→303).
(On your smartphone)
2Close “Image App”
From the “Image App” screen, press the home button on the smartphone to close the app\

From the “Image App” screen, press the back button on the smartphone twice to close t\
he app
 • When recording with [4K Pre-Burst] with the smartphone, terminate the connection only 
after switching to 4K Burst recording by pressing [Q.MENU/ ] button on the camera. 
SQW0547     
						

							312
Wi-Fi
Operating the camera by connecting it to a smartphone
Taking pictures via a smartphone (remote recording)
1Connect to a smartphone (→306)
2Operate the smartphone
Select [  ]Take pictures • The recorded images are saved in the camera. • Some settings are not available.
 ●When using zoom, the camera could tilt when the lens barrel extends. Mak\
e sure to secure the 
camera in place with a tripod or by other means.
 ●This function is not available in the following cases: • Panorama Shot Mode • When using [T

ime Lapse Shot]
 • When [Snap Movie

] is set to [ON]
Taking a picture while jumping
When you hold your smartphone and jump, the camera’s shutter can be released 
automatically as the smartphone detects the peak of the jump.
1[  ] → [  ] → Select the sensitivity
 • [  ] will be displayed on the remote recording screen of the smartphone. • We recommend that you take test pictures. • For details about the operating procedure, refer to [Help] in the “Image App”. 
SQW0547     
						

							313
Wi-Fi
Operating the camera by connecting it to a smartphone
Playing back pictures in the camera on a smartphone
1Connect to a smartphone (→306)
Switch the 
device of the 
pictures to be 
displayed2Operate the smartphone
Select [  ] • You can switch a device of pictures to be displayed using the icon at 
the top left on the screen. Select [LUMIX] to display a picture saved 
in the camera.
 • When the picture is touched, it is played back at a larger size.
 • When playing back motion pictures, the data size is reduced during trans\
mission of motion pictures to “Image App”.  Therefore, the picture quality may be different from the 
actual motion picture that you have recorded. Depending on your smartpho\
ne and its 
usage environment, you may notice degradation in the picture quality or \
skipping of 
sound when playing back motion pictures and still pictures.
Saving pictures in the camera to a smartphone
1Connect to a smartphone  (→306)
2Operate the smartphone
Select [  ] • You can switch a device of pictures to be displayed using the icon at 
the top left on the screen. Select [LUMIX] to display a picture saved 
in the camera.
Press and hold the picture and drag it to save it on the 
smartphone
 • Functions can be assigned to the top, bottom, left and right as you wish\
.
 ●RAW still pictures, AVCHD motion pictures, MP4 motion pictures for which the [Rec Quality] size is 
[4K], 4K burst files, and pictures recorded with [Post Focus] cannot be saved. 
SQW0547     
						

							314
Wi-Fi
Operating the camera by connecting it to a smartphone
Sending pictures in the camera to social networking services
1Connect to a smartphone (→306)
Switch the 
device of the 
pictures to be 
displayed2Operate the smartphone
Select [  ] • You can switch a device of pictures to 
be displayed using the icon at the top 
left on the screen. Select [LUMIX] to 
display a picture saved in the camera.
Press and hold the picture and drag 
it to send it to the social networking 
service, etc.
 • The picture will be sent to the social networking service or other WEB 
services.
 • Functions can be assigned to the top, bottom, left and right as you wish\
.
Adding location information to pictures in the camera from a 
smartphone
You can send the location information acquired from a smartphone to the c\
amera. After 
the information is sent, you can write it on the pictures in the camera.\
GPS
Starts location information recording
Start the recording
Ends location information recording
Sends and writes the location 
information
 • You can also use [Location Logging] in the [Playback] menu to write the sent location information to the pictures.
 • Location information that is different from the information acquired during recording may  be written. 

Take care regarding the following matters.
 – Set [Home] of [ W

orld Time] of the camera to your home area.
 – Once a smartphone starts recording the location information, do not chan\
ge the [Home] setting of [

World Time] of the camera.
 • The location information cannot be written to pictures recorded without \
setting [Clock Set]. 
SQW0547     
						

							315
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Recording location information and taking pictures
Start recording the location information on your smartphoneStart  “Image App” (→305)
Select [  ]
Select [  ]
Select [  Start geotagging]
Take pictures using the cameraEnd recording of the location information on your smartphoneSelect [  Stop geotagging] to end recording of location information
 ■Writing location information to a picture
Preparation
(On the camera) Connect to a smartphone. (→306)
Operate the smartphoneStart  “Image App” (→305)
Select [  ]
Select [  ]
Select [  ] to send or write location information • Follow the messages on the screen to perform the operation. • [  ] is displayed for pictures that have locatio n information written to it.
 ●The smartphone battery drains faster while location information is being\
 recorded. When recording 
of location information is not necessary, stop it.
 ●For details about the operating procedure, etc., refer to [Help] in the “Image App” menu. • On the smartphone, you can set the acquisition interval of location info\
rmation and check the 
transfer status of location information
 ●The location information cannot be written in the following cases: • Images recorded after location information was sent to the camera • Pictures that already have location information • Motion pictures recorded in [AVCHD] format • Protected pictures • There is not enough free space on your card • Card switch is in “LOCK” position • When connected to computer/printer • Pictures recorded using cameras other than this unit 
SQW0547     
						

							316
Wi-Fi
Operating the camera by connecting it to a smartphone
Combining motion pictures recorded with Snap Movie 
according to your preference on a smartphone
Using a smartphone, you can combine motion pictures recorded with the ca\
mera’s [Snap 
Movie] function (→262). Music can be added to motion pictures to be combined. In 
addition, you can save the combined motion picture or upload it on a web\
 service.
Record motion pictures 
with [Snap Movie]Send the recorded 
motion picturesEditWEB 
services
Combine the motion 
pictures, save the 
combined motion picture, 
and send it to a web 
service
Combine the motion 
pictures, and save the 
combined motion picture 
SQW0547     
						

							317
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Combining motion pictures by operating a smartphone
Connect to a smartphone (→306)Operate the smartphoneSelect [  ]
Select [  ]
 • [Snap Movie

] motion pictures with recent recording dates will be selected and autom\
atically 
sent to the smartphone.
 • When motion pictures with recent recording dates are not available, a sc\
reen that lets you  select motion pictures will be displayed. Select motion pictures and sen\
d them.
Operate the smartphone to edit the motion pictures • Read the [Help ] in the “Image App” menu for further details on how to operate [Snap Movie] 
of  “Image App”.
 ●[Snap Movie] of the “Image App” requires a smartphone that supports Android OS 4.3 or higher. ●The iPhone 4 does not support [Snap Movie] of the “Image App”. ●The smartphone may not be able to play back and save [Snap Movie] motion\
 pictures recorded with 
another device. 
SQW0547     
						

							318
Wi-Fi
Displaying still pictures on a TV
You can display still pictures on a TV that is compatible with a DLNA certified digital 
media renderer (DMR) function.
Preparation
Set the TV to DLNA waiting Mode.
 • Read the operating instructions for your TV
.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Playback on TV]
2Select [Via Network] or [Direct] to connect (→338, 341)
3Select the device you wish to connect to • When the connection is established, the screen is displayed.
4Take or play back still pictures on this unit • To terminate the connection, follow the steps below: →  [Setup] → [ Wi-Fi] → [Wi-Fi Function] → [Ye s ]
(You can also close the connection by pressing the [Wi-Fi] button. (→303))
 ●When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K 
resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro 
cable. (→348)
 ●When a TV is connected to this unit, the TV screen may temporarily return to the status before the 
connection. Pictures are displayed again when you take or play back pict\
ures.
 ●Even if [Effect] and [Sound] are set on this unit, these settings are disabled when\
 the pictures are 
played back on a TV during Slide Show playback.
 ●Motion pictures and 4K burst files cannot be played back. ●During Multi Playback, Calendar Playback, or when selecting a focus posi\
tion from a picture 
recorded in Post Focus, pictures displayed on the screen of the camera a\
re not displayed on the 
T V. 
SQW0547     
						

							319
Wi-Fi
When sending pictures, first select [New Connection], then 
select the method of sending pictures.
After you have completed connecting, you can also change 
the sending settings, such as the size of pictures to be sent.
 ■Images that can be sent
Destination JPEGR AW
MP4*1AVCHD*1, *24K Burst File*1
Pictures recorded in 
[Post Focus]*1
[Smartphone] (→322) ○–
○*3– –
[PC] (→325) ○ ○ ○ ○ ○
[Cloud Sync. Service] 
(→331) ○
–
○
*3– –
[Web service] (→327) ○–
○
*3– –
[AV device] (→324) ○– – – –
[Printer]
*1 (→323) ○
– – – –
*1  Sending by [Send Images While Recording] is not available.*2  Files larger than 4 GB cannot be sent.*3  Excluding motion pictures recorded with [Rec Quality] of [4K]. • Some images may not be played back or sent depending on the device. • For more information about picture playback, see the operating instructi\
ons of the 
destination device, or check the WEB service to which you will send the \
pictures.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you \
take it.
 • [  ] is displayed on the recording screen while connected by 
[Send Images While Recording ], and [  ] is displayed while 
files are being sent.
 • To terminate the connection, follow the steps below:
 →  [Setup] → [ Wi-Fi] → [Wi-Fi Function] → [Ye s ]
11
 • You can terminate the connection or change the send settings by pressing \
[Wi-Fi] 
button.  (→303) 
You cannot change the settings while sending a still picture. Wait until sending is 
complete.
Sending pictures 
SQW0547     
						

							320
Wi-Fi
Sending pictures
 ●Since the camera gives priority to recording, sending may take longer du\
ring the recording. ●If you turn off the camera before you have completed sending, or if you close the Wi-F\
i 
connection, or in similar situations, unsent files will not be resent.
 ●You may not be able to delete files or use the [Playback] menu while sending. ●Motion pictures, 4K burst files recorded with the 4K Photo function, and\
 pictures recorded in [Post 
Focus] cannot be sent.
 ●If you set [Time Lapse Shot], the Wi-Fi connection is terminated and you cannot use t\
his function.
[Send Images Stored in the Camera]
You can select and send recorded images.
 ■How to select an image(s) after selecting [Single Select] or [Multi Se\
lect]
[Single Select]
Select the picture
SetSet
Select [Set]
[Multi Select]
Select the picture (repeat) • If selected again, the setting will be canceled.23
456
1OKSelect [OK] • The number of pictures that can be sent by [Multi Select] is  limited.
 • To change the send settings on a screen that is displayed after the image\
 has been sent, press [DISP .] button. To close the connection, select [Exit].
 ●Details of the [Playback] menu [Favorite] or [Print Set] settings will not be sent. ●Some images taken with a different camera may not be able to be sent. ●Images that have been modified or edited with a computer may not be able\
 to be sent. 
SQW0547