Panasonic Digital Camera Dmc Gh4 Owners Manual

							251
9. Playing Back and Editing Images
You can set protection for pictures you do not want to delete by mistake.
1Select the menu.  (P54)
∫ Canceling all the [Protect] settings
Select the menu.  (P54)
•
Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•The [Protect] feature is only designed to work with this camera.•Even if you protect pictures on a card, they will be deleted if the card is formatted.•When you set pictures in a group to [Protect], the number of pictures with the [Protect] setting is 
displayed on the [Protect] icon of the group’s top picture.
[Protect]
> [Playback]  > [Protect]  > [Single]/[Multi]
2Select the picture.
[Single] setting
Press  2/1 to select the picture, and then press [MENU/
SET].
•
The setting is canceled when [MENU/SET] is pressed 
again.
•Exit the menu after it is set.
[Multi] setting
Press  3/4/2 /1  to select the pictures and then press 
[MENU/SET] (repeat).
•
The setting is canceled when [MENU/SET] is pressed 
again.
•Exit the menu after it is set.
> [Playback]  > [Protect]  > [Cancel]
Even if you do not protect pictures on a card, they cannot be deleted when the 
card’s Write-Protect switch is set to [LOCK].
MENU
6HW&DQFHO
123
456
6HW&DQFHO
MENU 
						

							9. Playing Back and Editing Images
252
You can clear and replace all information relating to face recognition in selected images.
1Select the menu.  (P54)
2Press 2/1  to select the picture and then press [MENU/SET].3Press  2/1  to select the person and then press [MENU/SET].
4(When [REPLACE] is selected)
Press  3/4 /2 /1  to select the person to replace and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Play].
•The Face Recognition information of pictures in a group has to be edited at once.
(You cannot edit one picture at a time.)
•Editing of group pictures can be performed only on the first picture of each set.
You can set the order in which the camera displays images during playback.
1Select the menu.  (P54)
2Press 3/4  to select an item and then press [MENU/SET].
•
Exit the menu after it is set.
•When you insert another card, images may not be displayed by [DATE/TIME] first. The images 
will be displayed by [DATE/TIME] if you wait for a while.
[Face Rec Edit]
> [Playback]  > [Face Rec Edit]  > [REPLACE]/[DELETE]
[Picture Sort]
> [Playback]  > [Picture Sort]
[FILE NAME] Displays images by folder name/file
 name. This display format allows 
you to locate images in the card easily.
[DATE/TIME] Displays images by recording date. If the card contains pictures taken 
with more than one camera, this display format is convenient for 
looking for images.
MENU
MENU 
						

							253
9. Playing Back and Editing Images
This sets which option, [Yes] or [No], will be highlighted first 
when the confirmation screen for deleting a picture is 
displayed.
1Select the menu.  (P54)
2Press 3/4  to select an item and then press [MENU/SET].
•
Exit the menu after it is set.
[Delete Confirmation]
> [Playback]  > [Delete Confirmation]
[“Yes” first] [Yes] is highlighted first, so deletion can be done quickly.
[“No” first][No] is highlighted first. Accidental deletion of pictures is avoided.
NoYe s
MENU 
						

							254
10.Using the Wi-Fi/NFC Function
Wi-Fi
R function/NFC function
∫ Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that  the appropriate measures are taken for safety designs 
and defects for the systems used. Panasonic  will not take any responsibility for any 
damage that arises when using the camera fo r any purpose other than as a wireless LAN 
device.
∫ Use of the Wi-Fi function of this camera is presumed to be in countries where this 
camera is sold
There is the risk that the camera violates  the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for any 
violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or 
interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as 
near microwave ovens. These may cause the interruption of the radio waves.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless netwo rks that you are not authorized to use 
(SSID
¢) may be displayed, however do not attempt to connect to the network as it may be 
considered as unauthorized access.
¢ SSID refers to the name that is used to identify a network over a wireless LAN connection. If 
the SSID matches for both devices, transmission is possible.
∫Before Use
To use the Wi-Fi function on this unit, a wireless access point or a destination device 
equipped with the wireless LAN function is required. 
						

							255
10. Using the Wi-Fi/NFC Function
∫This unit is compatible with NFC
Using the NFC “ Near Field Communication ” function, you 
can easily transfer data necessary for a Wi-Fi connection 
between this camera and the smartphone/tablet.
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
[Wi-Fi]/[Fn1] button can be used in  two ways, as [Wi-Fi] or as 
[Fn1] (function 1). At the time of purchase, it is initially set to 
[Wi-Fi].
•
Refer to  P317 for details about the function button.
Pressing and holding [Wi-Fi] before connecting to Wi-Fi 
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet to 
this unit (QR code, SSID and password) is displayed.  (P259)
Pressing [Wi-Fi] before connecting to Wi-Fi
•Following items can be selected.
•These operating instructions describe the procedure for [New Connection].
Compatible models
This function can be used with the NFC compatible device with Android (OS version 
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer 
to the operating instructions of your device.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi 
connection
[New Connection]
[Select a destination from 
History] (P297)
[Select a destination from 
Favorite]  (P297)
0ø1
0Î0ç1

0ç10Ò
0ø1
0Î0ç1
 
						

							10. Using the Wi-Fi/NFC Function
256
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•Following items can be selected.
¢ This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or 
[Send Images Stored in the Camera]  is set to [Printer] .
∫ Describing method
When  “select [Select a destination from History]” , etc. is 
described in a step, perform any of the following operations.
•
The camera cannot be used to connect to a public wireless LAN connection.
•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless 
access point.
•It is recommended to use a fully charged battery when sending images.
•When the battery indicator is flashing red, the connection with other equipment may not start or 
the connection may be disrupted.
(A message such as [Communication error] is displayed.)
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Pictures may not be completely sent depending on radio wave conditions. If the connection is 
terminated while sending pictures, pictures with missing sections may be sent.
•Do not remove the memory card or battery or move to an area without any reception 
while sending images.
•The monitor display may become distorted for an instant while connected to the service, 
however this will not affect the image being sent.
•If you use the HDMI output during recording with [Bit Mode] in [HDMI Rec Output] set to 
[4:2:2 10bit], the Wi-Fi function will be disabled.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]Terminates the Wi-Fi connection, and allows you to 
select a different Wi-Fi connection.
[Change Settings for Sending 
Images]¢Refer to P301 for details.
[Register the Current Destination 
to Favorite]Registering the current connection destination or the 
connection method, you can easily connect with the 
same connection method next time.
[Network Address]
Displays the MAC address and IP address of this unit.
Button operation: Select [Select a destination from 
History] with the cursor button, and 
then press [MENU/SET].
Touch operation: Touch [Select a destination from  History]. 
						

							257
10. Using the Wi-Fi/NFC Function
What you can do with the Wi-Fi function
This owner’s manual refers to both smartphones and tablets as “smartphones” from this 
point on unless noted otherwise.
Controlling with a Smartphone/Tablet (P258)
Recording with a smartphone  (P264)
Playing back pictures in the camera  
(P265)
Saving images stored in the camera  
(P265)
Sending images to an SNS  (P267)
Writing location information on images stored in the camera (P267)
Easy connection, easy transfer
You can use easily by pressing and holding 
[Wi-Fi] or by using the NFC function.
Displaying pictures on a TV (P272)
Printing Wirelessly  (P273)
When sending images to AV device (P274)
You can send pictures and motion pictures to AV devices in your house 
(home AV devices). You can also send  them to the devices (external AV 
devices) of your family or friends living away from you via “LUMIX CLUB”.
When sending images to PC (P276)
Using Web services (P280)
You can send pictures and motion pictures to an SNS, etc. via “LUMIX 
CLUB”.
By using [Cloud Sync. Service], you can  receive pictures and motion pictures 
on a PC or smartphone.
0ç10Ò 
						

							10. Using the Wi-Fi/NFC Function
258
Controlling with a Smartphone/Tablet
Using a smartphone, you can record images on the 
camera and save them.
You need to install “ Panasonic Image App ” (referred to 
as “ Image App ” from this point on )  on your 
smartphone.
The “ Image App ” is an application provided by Panasonic.
•
OS (As of March 2014)
•Use the latest version.
•Read the [Help] in the “ Image App ” menu for further details on how to operate.•The screen differs depending on the OS.•The screens and procedures described from this point on are those at the time when the model 
first became available for purchase. The screens and procedures may change with version 
updates.
•The service may not be able to be used properly depending on the type of smartphone being 
used.
For information on the “ Image App ”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)•When downloading the app on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.
Installing the smartphone/tablet app “ Image App ”
App for AndroidTM: Android 2.3.3 or higher¢
App for iOS: iOS 5.0 or higher
¢ Connecting to this unit with [Wi-Fi Direct] requires  Android OS 4.0 or higher and Wi-Fi 
Direct
TM support.
1Connect the smartphone to a network.
2(Android) Select “Google PlayTM Store”.
(iOS) Select “App Store
SM”.
3Enter “ Panasonic Image App ” into the search box.
4Select “ Panasonic Image App ”   and install it. 
						

							259
10. Using the Wi-Fi/NFC Function
A connection can be easily established by pressing and holding [Wi-Fi] or by using the 
NFC function.
1Press and hold [Wi-Fi] on the camera.
•The information required for connecting the smartphone to 
this unit (QR code, SSID and password) is displayed.
•If you press [MENU/SET] on the camera, the QR code will 
be enlarged. When it is difficult to scan the QR code, try 
enlarging it.
•To change the connection method, press [DISP.], and then 
select the connection method.  (P262)
•The same screen can be displayed by selecting the 
following menu items.
A SSID and password
B QR code
2Operate the smartphone/tablet.
•Once the connection is complete, the image from the camera will be displayed on the 
screen of the smartphone. 
(After this operation, it may take a while for the connection to be completed.)
•The connection method differs according to your smartphone.
Connecting to a smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance.  (P258)
> [New Connection]  > [Remote Shooting 
& View]
0ç10Ò
0ø1
0Î0ç1

AB
Wi-Fi 
						

							10. Using the Wi-Fi/NFC Function
260
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps  1 to  5 are not required)
1 Start “ Image App ”.  (P258)
2 Select [QR code], and then select [OK] .
3 Using “ Image App ”, scan the QR code displayed 
on the screen of the camera.
•
If you press [MENU/SET] on the camera, the QR 
code will be enlarged. When it is difficult to scan 
the QR code, try enlarging it.
4Install the profile of “IMAGE APP ”.
•A message will be displayed on the browser.•If the smartphone is locked with a passcode, enter the 
passcode to unlock the smartphone.
5Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
7 Select the SSID displayed on the 
screen of the camera.
8 Return to the home screen, and then start “ Image 
App ”.  (P258)
•
The connection method differs according to your smartphone/tablet.
IMAGE APPPanasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC