Panasonic Digital Camera Dmc Gh3 Owners Manual

							231
Wi-Fi
[Send Images Stored in the Camera]
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Details of the playback menu [Favorite] or [Print Set] settings will not be sent.•Some images taken with a different camera may not be able to be sent.•Images that have been modified or edited with a computer may not be able to be sent.
1Press [Wi-Fi].2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can 
select the connection destination from [Select a destination 
from History]  (P214) or [Select a destination from Favorite] 
(P215) .
3Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/SET].4Press  3/4  to select [Smartphone], and then press [MENU/SET].5Select the connection method.  ( below )
6Press  3/4 to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
7Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/SET].•To change the setting or disconnect, press [Wi-Fi]. (P221)
8Select and send the images.  (P232)
∫ When you want to connect to the smartphone/tablet via a wireless access point
(On your smartphone/tablet)
1On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.2Select the wireless access point you want to connect to, and set.
3Start “LUMIX LINK” on your smartphone/tablet.¢ (P211)(On the camera)
4Press  3/4  to select [Via Network], and then press [MENU/SET].
5Select the method for connecting to a wireless access point, and set.
•Refer to P217 for details.
When sending images to smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance.  (P211)
Selecting the method for connecting to the smartphone/tablet
0ç10Ò
0ø1
0Î0ç1
 
						

							232
Wi-Fi
∫When you want to directly connect the smartphone/tablet to this unit
•When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•For details on the connection methods, refer to  P219.
(On your smartphone/tablet)2Start “LUMIX LINK” on your smartphone/tablet.¢ (P211)
•When connecting with [Manual Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].2Press  3/4 to select [Manual Connection], and then press 
[MENU/SET].
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on 
the Wi-Fi function.
4Select the SSID that matches the one displayed on the 
sceen of this unit, and then enter the password.
5Start “LUMIX LINK” on your smartphone/tablet.¢  (P211)¢ A window indicating that the smartphone/tablet is connecting to the camera is displayed. If 
you are using an Android device, press the back key. If you are using an iOS device, close 
the window.
•The number of pictures that can be  sent by [Multi Select] is limited.
Select and send the images
[Single Select] setting
1 Press  2/1  to select the picture.
2 Press [MENU/SET].
•
Confirmation screen is displayed. It is 
executed when [Yes] is selected.
[Multi Select] setting
1 Select the picture, and then press 
[MENU/SET] to set (repeat).
•
The setting is canceled when 
[MENU/SET] is pressed again.
2Press  2 to select [OK], and then 
press [MENU/SET] to execute.
•
Confirmation screen is displayed. It is 
executed when [Yes] is selected.
[Single Select] [Multi Select]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
6HW
2. 
						

							233
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]. (P215)
3Press  3/4  to select [Send Images Stored in the Camera], and then press 
[MENU/SET].
4Press  3/4  to select [PC], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a PC you want to connect, and then press [MENU/SET].
7Press  3/4  to select the folder you want to send, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
8Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/SET].•To change the setting or disconnect, press [Wi-Fi]. (P221)
9Select and send the images.  (P232)
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in 
those folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
•
Turn the computer on.•Prepare folders for receiving images on the PC before sending a picture to the PC.  (P226)
[Via Network]When you want to connect to your PC via a wireless access point. (P217)
[Direct]When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P219)
0ç10Ò
0ø1
0Î0ç1
 
						

							234
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]. (P215)
3Press  3/4  to select [Send Images Stored in the Camera], and then press 
[MENU/SET].
4Press  3/4  to select [Cloud Sync. Service], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].  (P217)
6Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P224)
7Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/SET].•To change the setting or disconnect, press [Wi-Fi]. (P221)
8Select and send the images.  (P232)
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P239) and configure the Cloud Sync. setting  
(P227)  to send a picture to a Cloud Folder.
0ç10Ò
0ø1
0Î0ç1
 
						

							235
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]. (P215)
3Press  3/4  to select [Send Images Stored in the Camera], and then press 
[MENU/SET].
4Press  3/4  to select [Web service], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].  (P217)6Press 3/4 /2 /1  to select a WEB service you want to connect, and then press 
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
7Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/SET].•To change the setting or disconnect, press [Wi-Fi].  (P221)
8Select and send the images. (P232)
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (P239) to send a picture to a WEB service.
When sending images to WEB services, such as  Facebook or YouTube, the WEB service 
being used must be registered with the “LUMIX CLUB”. Registering multiple WEB 
services will send images to  all services simultaneously. (P242)
0ç10Ò
0ø1
0Î0ç1
 
						

							236
Wi-Fi
•Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB Service with your smartphone/tablet or computer.
•If sending images fails, a report email outlining the failure will be sent to the email address 
registered with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image 
was taken. Check this information before uploading images to WEB services.
•Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
•When uploading images to the WEB Service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							237
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]. (P215)
3Press  3/4  to select [Send Images Stored in the Camera], and then press 
[MENU/SET].
4Press  3/4  to select [AV device], and then press [MENU/SET].5Press  3/4  to select [Home] or [External], and then press [MENU/SET].
6Press  3/4  to select connection method, and then press [MENU/SET].
•When [External] is selected, the screen for setting a wireless access point is displayed.  
(P217)
7Press  3/4 to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
8Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/SET].•To change the setting or disconnect, press [Wi-Fi].  (P221)
9Select and send the images. (P232)
When sending images to AV device
Preparations:
When sending a picture to [Home], set  your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•Registration to “LUMIX CLUB”  (P239)•Address number and access number acquired by the destination External AV device.  (P243)
[Via Network]When you want to connect to an AV device via a wireless access 
point. (P217)
[Direct]When you want to directly connect an AV device to this unit with 
[Wi-Fi Direct], [WPS Connection], or [Manual Connection].  (P219)
0ç10Ò
0ø1
0Î0ç1
 
						

							238
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]  (P215).
3Press 3/4  to select [Send Images Stored in the Camera], and then press 
[MENU/SET].
4Press  3/4  to select [Printer], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a printer you want to connect, and then press [MENU/SET].7Select pictures, and then print.  (P261)
•To change the setting or disconnect, press [Wi-Fi].  (P221)
•Motion pictures cannot be printed out.
When sending images to Printer
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)¢ 
printer.
¢ Compliant with the DPS over IP standards.
See the following website for information on the PictBridge (wireless LAN-compatible) printer.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)
[Via Network]When you want to connect to your Printer via a wireless access 
point.  (P217)
[Direct]When you want to directly connect  your printer to this unit with 
[Wi-Fi Direct], [WPS Connection], or [Manual Connection].  (P219)
0ç10Ò
0ø1
0Î0ç1
 
						

							239
Wi-Fi
Using “LUMIX CLUB”
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using,  or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures  to WEB services or external AV device.
•
You can set the same “LUMIX CLUB” login ID for this unit and a smartphone/tablet.  (P241)
1Select [Wi-Fi] in the [Setup] menu. (P37)
2Select [Wi-Fi Setup] in the [Wi-Fi] menu.3Press 3/4  to select [LUMIX CLUB], and press [MENU/SET].4Press  3/4  to select [Add/Change Account], and press 
[MENU/SET].
5Press 3/4 to select [New account], and press [MENU/SET].•Connect to the network. Proceed to the next page by pressing 
[MENU/SET].
•A confirmation screen will be displayed if a login ID has already 
been acquired for the camera. Select [Yes] to acquire a new 
login ID, or [No] if you do not need to acquire a new login ID.
6Select the method for connecting to a wireless access point, and set.
•Refer to P217 for details.
7Read through the “LUMIX CLUB” terms of use and press 
[MENU/SET].
•
You can switch pages by  3/4.
•You can enlarge (2k ) the display by rotating the rear dial to the 
right.
•You can reset the enlarged display to its original size (1 k) by 
rotating the rear dial to the left.
•You can move the position of the enlarged display with  3/4 /2/ 1.•Press [ ] to cancel the process without acquiring a login ID.
8Enter a password and press [MENU/SET].
•Enter any combination of 8 to 16 characters and numbers for the password.•For details on how to enter characters, refer to “Entering Text” section on  P64.
About the [LUMIX CLUB]
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/ 
						

							240
Wi-Fi
9Check the login ID and press [MENU/SET].
•The login ID (12-digit number) will be displayed automatically. 
When logging in to the “LUMIX CLUB” with a computer, you only 
need to enter the numbers.
•A message is displayed when the connection is complete. Press 
[MENU/SET].
•Be sure to make a note of the login ID and password.
Preparation:
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” 
website from your smartphone/tablet or PC and change the “LUMIX CLUB” password in 
advance.
1Select [Wi-Fi] in the [Setup] menu.  (P37)
2Select [Wi-Fi Setup] in the [Wi-Fi] menu.3Press 3/4  to select [LUMIX CLUB], and press [MENU/SET].4Press  3/4  to select [Add/Change Account], and press [MENU/SET].
5Press  3/4  to select [Change Login ID], and press [MENU/SET].
•The login ID and password are displayed.•The password is displayed as “ ”.
•Close the menu if only checking the login ID.
6Press  3/4 to select the login ID or password you want to 
change, and press [MENU/SET].
•
The confirmation screen is displayed when changing the login 
ID. Select [Yes].
7Enter the login ID or password, and press [MENU/SET].
•Refer to “Entering Text”  (P64)  for information on how to enter text.•Enter the new password you have created on your smartphone/tablet or PC into the 
camera. If the password differs from the one you created on your smartphone/tablet or 
PC, you will not be able to upload images.
•Close the menu after changing settings.
Check or change the acquired login ID/password