Panasonic Digital Camera Dmc Gh3 Owners Manual

							201
Playback/Editing
You can enlarge and then clip the important part of the recorded picture.
1Select [Cropping] on the [Playback] menu. (P37)
2Press 2/1  to select the picture, and then press [MENU/SET].
3Use the rear dial and press 3 /4 /2/ 1 to select the parts to be cropped.
•
You can also touch [ ]/[ ] to enlarge/reduce.•You can also move by dragging on the screen.
4Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•The picture quality of the cropped picture will deteriorate.•Crop one picture at a time. (You cannot  edit all pictures in a group at once)
•When you crop pictures in a group, the cropped ones are saved separately from the original 
ones in the group.
•It may not be possible to crop pictures recorded with other equipment.
•You cannot use [Cropping] for the following pictures.–Motion pictures
–Pictures stamped with [Text Stamp]–Pictures taken with [ ], [ ] or [ ]•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Cropping].
[Cropping]
Rear dial (right): Enlargement
Rear dial (left): Reduction
3/4 /2/ 1: Move 
						

							202
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically or rotate pictures manually in 90 o steps.
1Select [Rotate] on the [Playback] menu. (P37)
•The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF].
2Press  2/1  to select the picture and then press [MENU/SET].
•The [Rotate] function is disabled for Group Pictures.
3Press  3/4 to select the direction to rotate the picture and 
then press [MENU/SET]. :
The picture rotates clockwise in steps of 90 o.
:
The picture rotates counter-clockwise in steps of 90 o.
•
Exit the menu after it is set.
1Select [Rotate Disp.] on the [Playback] Mode menu.  (P37)2Press 4 to select [ON] and then press [MENU/SET].
•The pictures are displayed without being rotated when you select [OFF].•Exit the menu after it is set.
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•[Rotate Disp.] is disabled during Multi Playback.
[Rotate]/[Rotate Disp.]
[Rotate] (The picture is rotated manually)
[Rotate Disp.] (The picture is automatically rotated and displayed) 
						

							203
Playback/Editing
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back the pictures set as favorites only as a slide show.
•Play back only the pictures set as favorites. ([Favorite Play])•Delete all the pictures not set as favorites. ([All Delete Except Favorite])
1Select [Favorite] on the [Playback] menu.  (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
∫ Canceling all the [Favorite] settings
1Select [Favorite] on the [Playback] menu.
2Press  3/4  to select [Cancel] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•In [Playback Mode] the [Cancel] Mode is disabled.
•You can set up to 999 pictures as favorites.•When you set pictures in a group as [Favorite], the number of your [Favorite] pictures is 
displayed on the [Favorite] icon of the group’s top picture.
•You may not be able to set pictures taken with other equipment as favorites.•You cannot use [Favorite] for the following pictures.–Pictures taken with [ ]
[Favorite]
3Select the picture, and then press 
[MENU/SET].
•
If [MENU/SET] is pressed again, the 
favorite setting is canceled.
•Exit the menu after it is set.
[Single] [Multi]
Press  2/1  to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
6HW&DQFHO
123
456
6HW&DQFHO 
						

							204
Playback/Editing
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
When you set [Print Set] for a group pictures, the print setting for the number of prints will 
be applied to every picture in the group.
1Select [Print Set] on the [Playback] menu.  (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
4Press  3/4  to set the number of prints, and then press [MENU/SET] to set.
•When [Multi] has been selected–repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a 
multiple number of pictures.)
•[999+] is displayed on the screen, if the total number of prints you set for a group pictures 
is more than 1000 pictures.
•Exit the menu after it is set.
∫ Canceling all the [Print Set] settings1Select [Print Set] on the [Playback] menu.
2Press  3/4  to select [Cancel] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
∫ To print the dateAfter setting the number of prints, set/cancel printing with the recording date by pressing 1.•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date print feature is disabled for pictures that are stamped with text.
[Print Set]
3Select the picture, and then press 
[MENU/SET]. [Single] [Multi]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
1111
6HWDWH&RXQW1
1111123
456
6HWDWH&RXQW1 
						

							205
Playback/Editing
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
•When you set pictures in a group to [Print Set],  the number of pictures added to [Print Set] and 
the total number of pictures to be printed are displayed on the [Print Set] icon of the group’s top 
picture.
•You cannot use [Print Set] for the following pictures.
–Motion pictures–Pictures taken with [ ]•If the file is not based on the DCF standard, the DPOF print setting cannot be set.
You can set protection for pictures you do not want to delete by mistake.
1Select [Protect] on the [Playback] menu.  (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
∫ Canceling all the [Protect] settings
1Select [Protect] on the [Playback] menu.
2Press  3/4  to select [Cancel] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•The [Protect] feature is only designed to work with this camera.•Even if you protect pictures on a card, they will be deleted if the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
•When you set pictures in a group to [Protect], the number of pictures with the [Protect] setting is 
displayed on the [Protect] icon of the group’s top picture.
[Protect]
3Select the picture, and then press 
[MENU/SET].
•
The settings are canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[Single] [Multi]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
6HW&DQFHO
123
456
6HW&DQFHO 
						

							206
Playback/Editing
You can clear and replace all information relating to face recognition in selected images.
1Select [Face Rec Edit] on the [Playback] menu. (P37)
2Press 3/4  to select [REPLACE] or [DELETE] and then press [MENU/SET].
3Press  2/1  to select the picture and then press [MENU/SET].
4Press  2/1  to select the person and then press [MENU/SET].
5(When [REPLACE] is selected) Press  3/4/2 /1  to select the person to replace 
and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Cleared information regarding the [Face Recog.] cannot be restored.
•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Play].
•The Face Recognition information of pictures in a group has to be edited at once. (You cannot 
edit one picture at a time.)
[Face Rec Edit] 
						

							207
Wi-Fi
Wi-FiR function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that  the appropriate measures are taken for safety designs 
and defects for the systems used. Panasonic  will not take any responsibility for any 
damage that arises when using the camera fo r any purpose other than as a wireless LAN 
device.
∫ Use of the Wi-Fi function of this camera is presumed to be in countries where this 
camera is sold
There is the risk that the camera violates  the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for any 
violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or 
interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as 
near microwave ovens. Radio waves may not reach the camera.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless netwo rks that you are not authorized to use 
(SSID
¢) may be displayed, however do not attempt to connect to the network as it may be 
considered as unauthorized access.
¢ SSID refers to the name that is used to identify a network over a wireless LAN connection. If 
the SSID matches for both devices, transmission is possible. 
						

							208
Wi-Fi
∫Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 Long AVCHD motion pictures may not be sent.
•Some images may not be played back or sent depending on the device.•Refer to the manual of the destination equipment or the WEB service for more information on 
how to playback pictures.
∫ About the Wi-Fi connection lamp
∫ Before Use
•
To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped 
with the wireless LAN function is required.
Images to 
send
Destination
[Smart
phone][PC][Cloud  Sync. 
Service][Web 
service][AV device][Printer]¢ 1[Home][External]
JPEG ±± ± ± ± ± ±
RAWiJPEG — ±—————
RAW —± —————
MP4¢1±± ± ± —— —
AV C H D¢1, 2— ± —————
MOV¢1— ± —————
3D —±± ± ±± —
A Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi 
connectionWi-Fi 
						

							209
Wi-Fi
•The camera cannot be used to connect to a public wireless LAN connection.•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless 
access point.
•We strongly recommend that you set an encryption to maintain information security.•It is recommended to use a fully charged battery when sending images.•When the battery indicator is flashing red, the connection with other equipment may not start or 
the connection may be disrupted. (A message such as [Communication error] is displayed.)
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Pictures may not be completely sent depending on radio wave conditions. If the connection is 
terminated while sending pictures, pictures with missing sections may be sent.
•Do not remove the memory card or battery or move to an area without any reception 
while sending images.
•The monitor display may become distorted for an instant while connected to the service, 
however this will not affect the image being sent. 
						

							210
Wi-Fi
What you can do with the Wi-Fi function
Linking with the Wi-Fi compatible equipment allows you to remotely operate the camera, 
or share pictures with people in distant places even during recording or playing back.
[Remote Shooting] (P211)[Playback on TV] (P220)
Linking with a smartphone/tablet enables 
the following:
•Remote recording  (P213)•Playing back the pictures in the camera 
(P213)
•Saving the pictures in the camera to the 
smartphone/tablet, or sending them to WEB 
services.  (P213)
•Sending the acquired location information to 
the camera.  (P213)
By linking with the DLNA compatible TV, 
you can display pictures on TV right 
after taking them or display them on TV 
later by playing them back on the 
camera.
[Send Images While Recording]  (P222)[Send Images Stored in the Camera]  (P231)
Every time you take a picture, the picture 
can be automatically sent to a specified 
location. You can play back the picture on 
the smartphone/tablet, or save and edit it 
on PC.
•Send to:–[Smartphone]/[PC]/[Cloud Sync. Service]/
[Web service]/[AV device] You can select and send recorded images.
•Send to:–[Smartphone]/[PC]/[Cloud Sync. Service]/
[Web service]/[AV device]/[Printer]