Panasonic Digital Camera Dmc Gh3 Owners Manual

							221
Wi-Fi
•Motion pictures cannot be displayed on a TV.•During the multi/calendar playback, pictures displayed on the screen of this unit are not 
displayed on TV.
•When a TV is connected to this unit, the TV screen may temporarily return to the status before 
the connection. Pictures are displayed again when you take or play back pictures.
•[Effect] and [Sound] of the Slide Show are disabled. 
1Press [Wi-Fi] when connected to Wi-Fi.2Press 3/4  to select the item, and press [MENU/SET].
What you can do with the [Wi-Fi] button when connected to Wi-Fi
ItemDescription of settings
[Terminate the Connection]Terminates the Wi-Fi connection.
[Change the Destination]Terminates the Wi-Fi connection, and allows you to 
select a different Wi-Fi connection.
[Change Settings for Sending 
Images]Refer to 
P224 for details.
[Register the Current Destination 
to Favorite]Registering the current connection destination or the 
connection method, you can  easily connect with the 
same connection method next time. 
						

							222
Wi-Fi
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
Since the camera gives priority to recordi ng, sending may take longer during the recording 
of Burst pictures or motion pictures.
•
Motion pictures cannot be sent.•If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will 
not be resent.
•You may not be able to delete files or use the playback menu while sending.•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
1Press [Wi-Fi].
2Press  3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you 
can select the connection destination from [Select a 
destination from History]  (P214) or [Select a destination 
from Favorite]  (P215).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].4Press  3/4  to select [Smartphone], and then press [MENU/SET].5Select the connection method. (P223)
6Press  3/4 to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
7Take pictures.
•The pictures are sent automatically after taking them.•To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance.  (P211)
0ç10Ò
0ø1
0Î0ç1
 
						

							223
Wi-Fi
∫When you want to connect to the smartphone/tablet via a wireless access point(On your smartphone/tablet)
1On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.
2Select the wireless access point you want to connect to, and set.3Start “LUMIX LINK” on your smartphone/tablet.¢ (P211)(On the camera)
4Press  3/4  to select [Via Network], and then press [MENU/SET].5Select the method for connecting to a wireless access point, and set.
•Refer to P217 for details.
∫ When you want to directly connect the smartphone/tablet to this unit
•When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•For details on the connection methods, refer to  P219.
(On your smartphone/tablet)2Start “LUMIX LINK” on your smartphone/tablet.¢ (P211)
•When connecting with [Manual Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
2Press  3/4 to select [Manual Connection], and then press 
[MENU/SET].
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on 
the Wi-Fi function.
4Select the SSID that matches the one displayed on the 
sceen of this unit, and then enter the password.
5Start “LUMIX LINK” on your smartphone/tablet.¢  (P211)¢ A window indicating that the smartphone/tablet is connecting to the camera is displayed. If 
you are using an Android device, press the back key. If you are using an iOS device, close 
the window.
Selecting the method for connecting to the smartphone/tablet 
						

							224
Wi-Fi
Press 3/4  to select the item, and press [MENU/SET].
Changing the settings for sending images
ItemDescription of settings
[Size] Resize the image to send.
[Original]/[Auto]
¢
1/[Change]•If you select [Auto], the image size is determined by the 
circumstances at the destination.
•You can select the image size for [Change] from [M], [S] or [VGA].
The aspect ratio does not change.
[File Format] [JPG]/[RAW iJPG]/[RAW]
[Delete Location 
Data]¢2
Select whether to delete the location information from images before 
sending them.
[ON]: Delete the location information, then send.
[OFF]: Keep the location information and send.
•This operation only deletes the location information from the images 
that are set to be sent. (The location information will not be deleted 
from the original images stored in this unit.)
[Cloud Limit]¢3
You can select whether to send images when the Cloud Folder runs 
out of free space.
[ON]: Do not send images.
[OFF]: Delete images from the oldest ones, then send new images.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when [Send Images Stored in the Camera] is selected and the destination is 
set to [Cloud Sync. Service], [Web service] or [External] of [AV device].
¢ 3 Only available when the destination is set to [Cloud Sync. Service]. 
						

							225
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]  (P215).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4Press 3/4  to select [PC], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].
6Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].7Press  3/4  to select the folder you want to send, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
8Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P221)
You cannot change the settings while sending pictures. Wait until sending is complete.
•Folders sorted by the sent date are created in the specified folder, and pictures are saved in 
those folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
•
Turn the computer on.•Prepare folders for receiving images on the PC before sending a picture to the PC.  (P226)
[Via Network]When you want to connect to your PC via a wireless access point. (P217)
[Direct]When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P219)
0ç10Ò
0ø1
0Î0ç1
 
						

							226
Wi-Fi
•Create a PC user account [account name (up to 254 characters) and password (up to 32 
characters)] consisting of alphanumeric characters. An attempt to create a receive folder may 
fail if the account includes non-alphanumeric characters.
∫When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P255) .
2Create a folder that receives images with “ PHOTOfunSTUDIO ”.
•To create the folder automatically, select [Auto-create]. To specify a folder, create a new 
folder, or set a password to the folder, select [Create manually].
•For details, refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
∫When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows 7/Windows Vista/Windows XP
Example: Windows 7
1Select a folder you intend to use for receiving, then right-click.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the operating system.
(For Mac)
Supported OS: OS X v10.4 to v10.8
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]  [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the operating system.
To create a folder that receives images 
						

							227
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]  (P215).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4Press 3/4  to select [Cloud Sync. Service], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].  (P217)6Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P224)
7Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P221)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P239) and configure the Cloud Sync. setting to 
send a picture to a Cloud Folder.
∫ About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] 
(As of October 2012)
To send images to a PC, Cloud Sync. setting is  required. Configure the settings on a PC 
with “ PHOTOfunSTUDIO ” or on a smartphone/tablet with “LUMIX LINK”.
•
If you set the picture destination to [Cloud Sync. Service], sent pictures are temporarily saved 
in the cloud folder, and they can be synchronized with the device in use, such as the PC or 
smartphone/tablet.
•A Cloud Folder stores transferred images for 30 days (up to 1000 pictures). Transferred 
images are deleted automatically 30 days after the transfer. Furthermore, when the number of 
stored images exceeds 1000, some images  may be deleted depending on the [Cloud Limit] 
(P224)  setting even within 30 days after the transfer.
•When the download of images from a Cloud Folder to all specified devices is complete, 
images may be deleted from the Cloud Folder even within 30 days after the transfer.
0ç10Ò
0ø1
0Î0ç1
 
						

							228
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]  (P215).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].4Press 3/4  to select [Web service], and then press [MENU/SET].
5Press  3/4  to select connection method, and then press [MENU/SET].  (P217)6Press 3/4 /2 /1 to select a WEB service you want to connect, and then press 
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
7Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P221)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (P239) to send a picture to a WEB service.
When sending images to WEB services, such as  Facebook or YouTube, the WEB service 
being used must be registered with the “LUMIX CLUB”. Registering multiple WEB 
services will send images to  all services simultaneously. (P242)
0ç10Ò
0ø1
0Î0ç1
 
						

							229
Wi-Fi
•Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB Service with your smartphone/tablet or computer.
•If sending images fails, a report email outlining the failure will be sent to the email address 
registered with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image 
was taken. Check this information before uploading images to WEB services.
•Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
•When uploading images to the WEB Service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							230
Wi-Fi
1Press [Wi-Fi].
2Press 3/4  to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection 
destination from [Select a destination from History]  (P214) or [Select a destination from 
Favorite]  (P215).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4Press 3/4  to select [AV device], and then press [MENU/SET].5Press  3/4  to select [Home] or [External], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].
•When [External] is selected, the screen for setting a wireless access point is displayed.  
(P217)
7Press  3/4 to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P224)
8Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P221)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to AV device
Preparations:
When sending a picture to [Home], set  your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•Registration to “LUMIX CLUB”.  (P239)•Address number and access number acquired by the destination External AV device.  (P243)
[Via Network]When you want to connect to an AV device via a wireless access 
point. (P217)
[Direct]When you want to directly connect an AV device to this unit with 
[Wi-Fi Direct], [WPS Connection], or [Manual Connection].  (P219)
0ç10Ò
0ø1
0Î0ç1