Panasonic Digital Camera Dmc Gh3 Owners Manual

							191
Motion Picture
Settings: [REAL TIME]/[REC SOUND]
•Refer to P182 for details.
Applicable modes: 
Reduces the wind noise effectively if there is wind noise when recording sound.
Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF]
•
Setting [Wind Cut] may alter the usual sound quality.•Not available with [Miniature Effect] in Creative Control Mode.
•When an external microphone is connected, [AUTO] is not available.
[Headphone Sound]
[Wind Cut] 
						

							192
Playback/Editing
Using the [Playback] Menu
For details on [Playback] menu settings, refer to P37.
With this menu, you can use various playback functions such as cropping and other 
editing of recorded images, protect settings, etc.
•
With [Text Stamp], [Resize] or [Cropping], a new edited picture is created. A new picture cannot 
be created if there is no free space on the card so we recommend checking that there is free 
space before editing the picture.
Playback methods for the 3D pictures can be switched.
•This is a menu that is only displayed when 3D display is possible. Refer to  P248 for details.
You can play back the pictures you have tak en in synchronisation with music, and you can 
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show composed of only still pictures, only motion 
pictures, only 3D pictures etc.
We recommend this feature when you view your  pictures by connecting the camera to a 
TV.
1Select [Slide Show] on the [Playback] menu.  (P37)
2Select the group to play back by pressing 3/4, and then 
press [MENU/SET].
•
Refer to P248  for the method to play back [3D] pictures in 3D.•During [Category Selection], press  3/4 /2/ 1 to select a 
category, and then press [MENU/SET]. Refer to   P194 for 
category details.
3Press  3 to select [Start] and then press [MENU/SET].
[2D/3D Settings]
[Slide Show] 
						

							193
Playback/Editing
∫Operations performed during slide show
Display at the right of the screen  while playing back corresponds to  3/4/ 2/1 on the 
cursor button.
•
Normal playback resumes after the slide show finishes.
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting [Effect] or [Setup] on the 
slide show menu screen.
[Effect]
This allows you to select the screen effect s when switching from one picture to the next.
[AUTO], [NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[AUTO] can be used only when [Category Selection] has been selected. The pictures are 
played back with the recommended effects in each category.
•[Effect] is fixed to [OFF] when in [Video Only] or during the slide show for [ ], [ ] in 
[Category Selection].
•Even if [Effect] is set, it does not work during a slide show of Group Pictures.•Some [Effect] will not operate when playing back pictures displayed vertically.
[Setup]
[Duration] or [Repeat] can be set.
•
[Duration] can be set only when [OFF] has been selected as the [Effect] setting.•Even if [Duration] is set, it does not work duri ng a slide show of motion pictures only or slide 
show of Group Pictures.
3Play/Pause4Exit slide show
2
Back to previous picture
(while pausing/playing back 
motion pictures/playing back 
group pictures)
1
Ahead to next picture
(while pausing/playing back 
motion pictures/playing back 
group pictures)
Control  dial
(left)Reduce volume levelControl  dial
(right)Increase volume level
ItemSettings
[Duration] [1SEC]/[2SEC]/[3SEC]/[5SEC]
[Repeat][ON]/[OFF]
[Sound][AUTO]: Music is played when the still pictures are played back, 
and audio is played when the motion pictures are played 
back.
[Music]: Music is played back.
[Audio]: Audio (only for motion pictures) is played back.
[OFF]: There will be no sound. 
						

							194
Playback/Editing
Playback in [Normal Play], [Picture Only], [Video Only], [3D Play], [Category Play] or 
[Favorite Play] can be selected.
1Select [Playback Mode] on the [Playback] menu.  (P37)
2Select the group to play back by pressing 3/4, and then press [MENU/SET].
•Refer to P248  for the method to play back [3D Play] pictures in 3D.
When [Category Play] is selected in above step 2
3Press  3/4 /2 /1  to select the category and then press [MENU/SET] to set.
•Pictures are sorted into the categories shown below.
[Playback Mode]
Recording information e.g. Scene Detection or Scene Guide Modes
•[Face Recog.]¢
*
•[i-Portrait], [i-Night Portrait], [i-Baby] in Scene Detection•[Clear Portrait]/[Silky Skin]/[Backlit Softness]/[Clear in Backlight]/
[Relaxing Tone]/[Sweet Childs Face]/[Clear Night Portrait] (Scene Guide 
Mode)
,
•[i-Scenery], [i-Sunset] in Scene Detection•[Distinct Scenery]/[Bright Blue Sky]/[Romantic Sunset Glow]/[Vivid 
Sunset Glow]/[Glistening Water] (Scene Guide Mode)
.
•[i-Night Portrait], [i-Night Scenery] in Scene Detection
•[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Artistic 
Nightscape]/[Glittering Illuminations]/[Clear Night Portrait] (Scene Guide 
Mode)
•[Clear Sports Shot] (Scene Guide Mode)
1•[Appetizing Food]/[Cute Dessert] (Scene Guide Mode)
•[Travel Date]
Still pictures recorded continuously  with burst speed set to [SH]
Pictures taken in [Time Lapse Shot]
¢ Press  3/4/2/1  to select the person to play back and then press [MENU/SET].
Grouped pictures are treated as a single picture with a recognized face.
•Categorisation of the motion pictures differ from the still pictures depending on the 
Recording Mode. Some motion pictures may not be played back. 
						

							195
Playback/Editing
The location information (longitude/latitude) acquired by the smartphone/tablet can be 
sent to the camera and written in images.
Preparation:
Sending location information to the camera from the smartphone/tablet.  (P213)
1Select [Location Logging] on the [Playback] menu. (P37)
2Press 3/4 to select [Add Location Data] and then press [MENU/SET].
3Press 3/4 to select the period you intend to record location 
information on pictures, then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.•The location information is recorded onto images.
•Images with location information are indicated with [ ].
∫ To pause the recording of location information
Press [MENU/SET] while recording of the location information onto pictures is taking 
place.
•
During a suspended period, [ ¥] is displayed.
Select the period with [ ¥] to restart the recording process from the picture you left off.
∫ To delete the received location information
1Select [Location Logging] on the [Playback] menu.  (P37)2Press 3/4  to select [Delete Location Data] and then press [MENU/SET].3Press  3/4  to select the period you want to delete, then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
•Location information can be written only to images taken on this camera.•Location information is not written onto the images that are recorded after [Send location data]. 
(P213)
•
Location information is not written onto the images recorded when [Rec Mode] is set to 
[AVCHD].
•When there is insufficient free space on the card, location information might not be able to be 
written.
•When the card is locked, location information cannot be written onto the images or received 
location information cannot be deleted.
[Location Logging] 
						

							196
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [Text Stamp]  (P197).
1Select [Title Edit] on the [Playback] menu.  (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
4Enter the text.  (P64)
•A maximum of 30 characters can be entered.•Up to 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
•Exit the menu after it is set.
•To delete the title, erase all the text in the text input screen.•You can print out texts (comments) using the “ PHOTOfunSTUDIO ” bundled software on the 
CD-ROM (supplied).
•You can set up to 100 pictures at one time with [Multi].•You cannot use [Title Edit] for the following pictures.
–Motion pictures–Pictures taken with [ ], [ ] or [ ]–Pictures recorded with other equipment
[Title Edit]
3Select the picture, and then press 
[MENU/SET] to set.
•
[ ’] is displayed for pictures with titles 
already registered.
[Multi] setting
1 Select the picture, and then press 
[MENU/SET] to set (repeat).
•
The setting is canceled when 
[MENU/SET] is pressed again.
2Press 2 to select [OK], and then 
press [MENU/SET] to execute. [Single]
[Multi]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
6HW
2. 
						

							197
Playback/Editing
You can stamp the recording date/time, name, location, travel date or title onto the 
recorded pictures.
1Select [Text Stamp] on the [Playback] menu. (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
4Press  3/4  to select [Set], and then press [MENU/SET].
5Press  3/4  to select text stamp items, and then press [MENU/SET].
[Text Stamp]
3Select the picture, and then press 
[MENU/SET] to set.
•
[‘ ] appears on screen if the picture is 
stamped with text.
[Multi] setting
1 Select the picture, and then press 
[MENU/SET] to set (repeat).
•
The setting is canceled when 
[MENU/SET] is pressed again.
2Press 2 to select [OK], and then 
press [MENU/SET] to execute. [Single]
[Multi]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
6HW
2. 
						

							198
Playback/Editing
6Press 3/4  to select the settings, and then press [MENU/SET].
7Press [ ].
8Press  3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 100 pictures at one time in [Multi].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When you stamp pictures in a group, the stampe d ones are saved separately from the original 
ones in the group.
•You cannot use [Text Stamp] for the following pictures.–Motion pictures–Pictures recorded without setting the clock and title
–Pictures stamped with [Text Stamp]–Pictures taken with [ ], [ ] or [ ]–Pictures recorded with other equipment
ItemDescription of settings
[Shooting 
Date][W/O TIME]:Stamp the year, month and date.
[WITH TIME]:Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []:
([Face 
Recognition])
Name registered in [Face Recog.] will be stamped.
[]:
([Baby/Pet]) Name registered in [Profile Setup] will be stamped.
[OFF]
[Location]
[ON]:Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date][ON]:Stamps the travel date set under [Travel Date].
[OFF]
[Title][ON]:Title input in the [Title Edit] will be stamped.
[OFF] 
						

							199
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to 
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1Select [Video Divide] on the [Playback] menu. (P37)
2Press 2/1  to select the motion picture to divide, and then press [MENU/SET].
•
The [Video Divide] feature only works on motion pictures recorded on this camera.
•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•If you divide a [MP4] or [MOV] motion pict ure, the display order of images changes.
It is recommended to search these motion pictures by using Calendar Playback  (P77) or [Video 
Only] in the [Playback Mode].
•You cannot use [Video Divide] for the following pictures.–Motion pictures with a short recording time
[Video Divide]
3Press  3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing  2/1 
while the motion picture is paused.
4Press  4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the dividing. 
						

							200
Playback/Editing
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
1Select [Resize] on the [Playback] menu. (P37)
2Press 3/4  to select [Single] or [Multi] and then press [MENU/SET].
•
You can set up to 100 pictures at one time in [Multi].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.
•You cannot use [Resize] for the following pictures.–Motion pictures–Group Pictures
–Pictures stamped with [Text Stamp]–Pictures taken with [ ], [ ] or [ ]
[Resize]
3Select the picture and size.
[Single] setting
1
Press 2/1 to select the picture, and then press [MENU/SET].
2 Press  3/4  to select the size, and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
[Multi] setting
1 Press  3/4  to select the size, and then press [MENU/SET].
2 Press  3/4 /2/ 1 Select the picture, and then press [MENU/
SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed again.
3 Press 2 to select [OK], and then press [MENU/SET] to 
execute.
•
Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
16 16
16
8
84
4
L
SM
6HW
2.