Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-89
To change the Walking TRS/Station Lockout security code:
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
•...

5-90 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• An alarm tone (default = 16 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-91
• MCO Trunk Access
CO Line Key Trunk Access
You can access an outside line by pressing a CO line key. 
Operation
To access an outside line:
Hardware Requirements
•N/A
Related Programming
• FF4: FF Key Assignment
Considerations
•N/A
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access 
to test trunks or to access data trunks.
Operation...

5-92 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
•N/A
MCO Line Preference
MCO Line Preference allows you to place an outside call by simply picking up the handset. When you 
go offhook, the MCO 1 trunk group is automatically accessed.
Operation
To place a call using MCO Line Preference:
Hardware Requirements
•N/A
Related Programming
• FF1: MCO Trunk...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-93
Hardware Requirements
•N/A
Related Programming
• FF1-3: MCO Access
• FF1-2: Dial Plan
• FF5-2: MCO Trunk Group (Outbound)
• FF7: ARS/TRS
Considerations
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO 
trunk access codes are displayed in the following table.
• MCO1 can have up to 5 trunk groups assigned by the...

5-94 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To set Trunk Queuing:
To respond to the Trunk Callback alert tone:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS (Trunk Queuing)
• FF3: Extension COS
Considerations
• Response to the Trunk Callback must be within 15 seconds or Trunk Queuing will be canceled.
• The Trunk Queuing feature may also be used if you hear a busy tone when trying to make a...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-95
Operation
To answer a UNA call:
To answer a UNA call using the assigned FF key:
Related Programming
• FF2-0: Trunk Ring Assignments
• FF1-2: Dial Plan (UNA Pickup Code)
• FF1-0-03: Extension COS (UNA Pickup)
• FF3: Extension COS
• FF3: Extension (External Ring Extension Number)
• FF1-0-27: System (UNA Ringing Port by Tenant Group)
• FF4-0: FF Keys on Digital Key Telephones
Hardware Requirements
•...

5-96 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Each extension may have customized soft key features available. The customization must be 
programmed by the dealer.
To access the feature beside the soft key, simply press the associated soft key. 
Operation
To enable Variable Mode:
To Execute a Variable Mode Function:
To cancel Variable Mode:
To assign Variable Mode Functions to a Small Display TelephoneAction Result
1.   Press the ON/OFF key.
2....

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-97
To assign Variable Mode Functions to a Large Display Telephone
Flexible Screen Positions
Hardware Requirements
• A 44-Series Display Telephone or or the VB-43225 Large Display Telephone
Related Programming
• FF4-2: Flexible Screens
• FF3-0: Variable Modes
Considerations
• The small display telephone will exit variable mode after a variable mode function is executed.
• The large display telephone will...

5-98 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Hardware Requirements
• Need VB-44224, VB-44101
Related Programming
•N/A
Considerations
• The VB-44224 24-key telephone is required.
• You must pre-program the desired calling information into the telephone’s Voice Recognition 
Unit in order for the System to recognize the verbal commands.
Volume Control
Description
The System allows you to set different receiving volumes for the handset, speaker,...