Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-39
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging. 
Related Programming
• FF1-0-02: Paging Override 
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to paging groups 0-9 
through the external...

6-40 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
• FF1-2: Dial Plan
Considerations
• The second extension called using the Reset Call feature must have the same number of digits as 
the first extension.
• If you program the System for Reset Call, the following features are not available: Camp-on 
(Ext. no. + 2), Callback Request (Ext. no. + 3), Message Waiting (Ext. no. + 4, Ext. no. + 5), 
Intercom Busy Override (Ext. no. + 9).
Room Monitoring
Version...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-41
To set up the monitoring extension:
The monitoring operation can be allowed or denied by extension COS and is controlled by the Busy 
Override feature. If Busy Override is denied and the user attempts to monitor an extension, the user 
will hear a fast busy tone. 
Additional operations may be performed from the monitoring extension when it is in monitoring 
mode:
Services available on the monitoring...

6-42 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring. 
• If the monitored extension is placed on-hook while Room Monitoring is activated, the 
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored 
extension will remain in the monitored mode, and can be...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-43
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to 
use.Action Result
1.   Lift the handset or press the ON/OFF key....

6-44 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
* Indicates that the digits that follow are either a feature access code or an extension 
number. (Not needed if your System is set for Intercom Level.) See Note below.
** Indicates that the digits that follow are for an outside number and the System should 
seize the next available trunk when dialing. (Not needed if your System is set for CO 
Level.) See Note below.
Note:The System has two levels - CO...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-45
To delete an SSD number:
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17 SSD Blocks
• FF1-0-02 SSD Digits
• FF1-0-03 Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• The system can be programmed to allow SSD Numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 5 SSD numbers in 1 PSD bin to handle...

6-46 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To link multiple SSD numbers to a PSD bin:
To use a PSD that links multiple SSDs:
To manually link speed dials together:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/AAction Result
1.   Determine the SSD bin numbers to be linked
2.   Lift the handset or press the ON/OFF key.
3.   Enter the Speed Dial Set/Clear code (default = 710).
4.   Enter the PSD bin number (80-99).
5....

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-47
Station Lockout
Description
Use the Station Lockout feature to limit use of your phone by others when you are away from your 
telephone. When the Station Lockout feature is in use, the TRS Class of your telephone is changed. 
Anyone using your telephone is limited to the calling abilities defined by this Lockout TRS Class.
In addition, with the appropriate COS, you can set or cancel Station Lockout for...

6-48 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To change the Walking TRS/Station Lockout security code:
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
•...