Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-49
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call is...

6-50 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To use Direct Trunk Access:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
•N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk 
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
Hardware Requirements
•N/A...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-51
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO 
trunk access codes are displayed in the following table.
• MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
• MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 2. MCO Trunk Access Codes
Trunk Queuing...

6-52 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS (Trunk Queuing)
• FF3: Extension COS
Considerations
• Response to the Trunk Callback must be within 15 seconds or Trunk Queuing will be canceled.
• The Trunk Queuing feature may also be used if you hear a busy tone when trying to make a call 
using the MCO Trunk Access feature. 
Universal Night Answer to Page
Description
During night mode,...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 6-53
Walking TRS Class of Service
Description
Walking Toll Restriction Service (TRS) Class of Service (COS) allows an extension user to “carry” 
his or her toll restrictions to another phone.
Before the Walking TRS COS feature can be used, a Walking TRS COS code must be entered at your 
extension before using dialing privileges at another extension.
Operation
To use a Walking TRS COS code:
Hardware...

6-54 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation 

576-50-700 DBS 576HD (USA) issued September 2001 7-1
Chapter 7. SLT Features
Single Line Telephones (SLTs) are industry-standard 2500 sets. SLTs are not equipped with feature 
keys or line keys, so basic telephone operations are performed by pressing dialpad keys and/or using 
the switchhook.
This chapter describes the following features that are available with SLTs. 
Topic Page
Absence Message 7-3
Account Codes 7-4
Non-Verified Account Codes
7-5
Verified Account Codes
7-5
Attendant Group Calls 7-6
Busy...

7-2 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Offhook Signaling 7-30
Offhook Voice Announce 7-31
Paging 7-32
Meet-Me Answer 7-32
Reset Call 7-33
Room Monitoring 7-34
Speed Dialing 7-35
Personal Speed Dial
7-35
System Speed Dial
7-36
Speed Dial Linking
7-38
Station Lockout 7-38
Timed Reminder Call 7-40
Trunk Access 7-41
Direct Trunk Access
7-42
MCO Trunk Access
7-42
Trunk Queuing 7-42
Universal Night Answer to Page 7-44
Walking TRS Class of Service...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-3
Absence Message
Description
Extension users can leave text messages related to their phones when they are away. When the 
unattended extension is dialed, the text message displays on the caller’s phone. Any one of the 
following messages can be selected. Messages 5 to 9 have no default message text. All the messages 
can be changed through system programming.
Table 7-1. Absence Messages 
Optionally, a...

7-4 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To cancel an Absence Message
Related Programming
• FF1 (System): Extension Class of Service Setting 
• FF3 (Extension): Extension Class of Service Assignment 
• FF8 (Maintenance): Absence Messages
Considerations
• Calling parties without a display get a busy signal, rather than the Absence Message.
• Regardless of setting an Absence Message on a DID/DIL extension, DID/DIL calls are routed 
according to...