Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-35
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring. 
• If the monitored extension is placed on-hook while Room Monitoring is activated, the 
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored 
extension will remain in the monitored mode, and can be...

7-36 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters.
• Single Line Telephone SLT can only enter 0, 1-9, *, and #. If a pause, MCO code, intercom level, 
Dial Pulse (DP) - Dual Tone Multifrequency...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-37
Operation
To assign SSD numbers:
To dial an SSD number by entering the speed dial bin number:
To delete an SSD number:
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17 SSD Blocks
• FF1-0-02 SSD Digits
• FF1-0-03 Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD NameAction Result
1.   Lift the handset. Intercom dial tone
2.   Enter the Speed Dial Set/Clear code...

7-38 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Considerations
• The system can be programmed to allow SSD Numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numbers 
longer than 24 characters. 
Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing the 
keys in the desired sequence. This can be useful for prepending...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-39
To activate Station Lockout feature:
To cancel Station Lockout feature:
To activate Station Lockout feature for another extension:
To cancel Station Lockout feature for another extension:Action Result
1.   Lift the handset. Intercom dial tone
2.   Dial the Station Lockout Set/Cancel (Own EXT) code 
(default = 746).
3.   Replace the handset.
Action Result
1.   Lift the handset. Intercom dial tone
2....

7-40 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To change the Station Lockout security code:
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
• FF1-2-02:...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-41
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have only one Reminder Call set at a time.
• To change the Reminder Call, simply enter a new time.
• If the extension is in use when the reminder call...

7-42 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access 
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Direct Trunk Access)
• FF3: Extension COS
Considerations
•N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 7-43
• FF5-2: MCO Trunk Group (Outbound)
• FF7: ARS/TRS
Considerations
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO 
trunk access codes are displayed in the following table.
• MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
• MCO1 access code is used for Automatic Route Selection...

7-44 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS (Trunk Queuing)
• FF3: Extension COS
Considerations
• Response to the Trunk Callback must be within 15 seconds or Trunk Queuing will be canceled.
• The Trunk Queuing feature may also be used if you hear a busy tone when trying to make a call 
using the MCO Trunk Access feature. 
Universal Night Answer to Page...