Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-69
To assign a feature code or extension number to a one-touch key:
To check a programmed one-touch key:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.
Onhook Dialing
Description
Onhook Dialing is a standard feature for key telephones where you can dial onhook using the...

5-70 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To dial onhook:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Paging
Description
The System allows you to make both internal and external pages and announcements. Internal pages 
are made via the System’s key telephone speakers. External pages are made through the speakers of 
an external paging system connected to the System.
Paging calls can be answered from any extension...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-71
Meet-Me Answer
To answer a page using Meet-Me Answer:
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• You can assign the paging access code to a one-touch or FF key....

5-72 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Reset Call
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply 
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-73
Hardware Requirements
•N/A
Related Programming
• FF3 (Extensions): Ringing Line Preference by Handset.
• FF3: Ringing Line Preference (ON/OFF)
Considerations
• If disabled in Extension Programming, you must press the line key or enter the feature code for 
incoming pick-up in order to answer a call.
Room Monitoring
Version 3.5 and higher
Description
This feature allows the user to monitor the sounds in a...

5-74 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Additional operations may be performed from the monitored extension when it is in monitored mode:
Note:When a monitored extension receives a call, the caller hears a busy tone.
To set up the monitoring extension:
The monitoring operation can be allowed or denied by extension COS and is controlled by the Busy 
Override feature. If Busy Override is denied and the user attempts to monitor an extension, the...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-75
•   Busy Override
•   On-Hook VA
•   The ability to receive a text message
•   Silent Monitor
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
• FF1-2-02: Dial Plan at DT Pattern 1
• FF1-2-03: Dial Plan at DT Pattern 2
Considerations
• If the monitored extension is placed on-hook while Room Monitoring is activated, the...

5-76 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To initiate Silent Monitor:
Note:The Silent Monitor key is disabled when the extension assigned to that key is idle, dialing, or 
ringing.
Silent Monitor Key Color Definitions
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Silent Monitor Initiate (0 = allow, 1 = deny, default = 1)
• FF1-0-03: Silent Monitor Receive (0 = allow, 1 = deny, default = 1)
Considerations
• Be sure all...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-77
Speed Dialing
Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD) 
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored 
in PSD bins numbered 80-99. 
You can assign up to 10 PSD numbers to the one-touch keys on a...

5-78 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To check a PSD number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• PSD number can be dialed from One-Touch keys. (For additional information, see “One-Touch 
Keys” on page 5-67.)
3.   Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4.   Enter the PSD bin number (80-99).
5.   Complete the call...