Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-79
• Storing a new number erases any previously stored data.
• If the called party’s number and name are stored in the PSD code, that information appears on the 
display when you use the speed dial code.
• Speed dial numbers can contain up to 24 characters. The following table reflects which keys to 
use.
* Indicates that the digits that follow are either a feature access code or an extension 
number. (Not...

5-80 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To dial an SSD number by entering the speed dial bin number:
To check an SSD number:Action Result
2.   (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3.   Enter the SSD bin number (00-79 or 000-799).Enter Spd Dial displays
4.   Dial the phone number.
5.   Press the HOLD key.Stored Spd Dial displays
6.   Replace the handset or press the...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-81
To delete an SSD number:
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17: SSD Blocks
• FF1-0-02: SSD Digits
• FF1-0-03: Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• If numbers do not appear on the display when you use SSD codes (00-79 or 000-799), your 
extension is not programmed to display that data.
• The System can be programmed to...

5-82 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To link multiple SSD numbers to a PSD bin:
To use a PSD Key that links multiple SSDs:
To manually link speed dial keys together:
Hardware Requirements
•N/AAction Result
1.   Determine the SSD bin numbers to be linked
2.   Lift the handset or press the ON/OFF key.
3.   (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
4.   Enter the...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-83
Related Programming
•N/A
Considerations
•N/A
Speed Dial Name Assignments
You can assign names to PSD numbers from a key telephone without entering the programming 
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD 
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16 
characters.)
Operation
PSD Names:
To set PSD names...

5-84 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
SSD Names:
To set SSD names using a large-display or small-display phone:
Example 1. Large-display phone
To  e n t e r  D:
a.  Press the first soft key on the top left.
Action Result
1.   Lift the handset or press the ON/OFF key.
2.   Press the PROG key.
3.   Press the * key.
4.   Enter 1 for the SSD Name Assignment mode.SSD NO.=>
SSD NAME displays
5.   Enter the speed dial bin number (00-79 or...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-85
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third soft key from the top right.
b.  Press the third FF key from the left on the bottom row. 

5-86 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Example 2. Small-display phone
Refer to the following diagram to determine which one-touch key to press. (See step 7-8 above.)
To  e n t e r  D:
a.  Press the first one-touch key from the left on the bottom row.
b.  Press the fourth FF key from the left on the bottom row.
G H I J K L M N O P Q R S T U V W X A B C D E F Y Z . , ’ -
a b c d e fg h i j k lm n o p q rs t u v w xy z : & / sp
END MODE 

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-87
To  e n t e r  o:
a.  Press the third one-touch key from the left on the top row.
b.  Press the third FF key from the left on the bottom row.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (User Log-in)
• FF3: Extension COS
• FF8-1: SSD & PSD
Considerations
• The ability to assign SSD names is allowed/restricted to anyone with a COS that allows access to 
User Maintenance...

5-88 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To activate Station Lockout feature:
To cancel Station Lockout feature:
To activate Station Lockout feature for another extension:
To cancel Station Lockout feature for another extension:Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
2.   Enter the Station Lockout feature code (default = 746).St. Lock Set displays
3.   Replace the handset or press the ON/OFF...