Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-39
• Do Not Disturb can only be set through the PDN, but cannot be set through the NPDN.
• Timed Reminder (Alarm Setting) is set through the PDN, but cannot be set through the NPDN.
• Offhook Voice Announce is available to PDN conversation, but not available to the NPDN 
conversation.
• The appearance of incoming CO calls have the following priority if the keys are set to the same 
extension:
•...

5-40 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Large-Display Phone
Figure 4.  Large-Display Main Menu (shown in default idle condition)
You can easily access and use many telephone features by pressing the soft key next to the desired 
Main Menu item. These items include:
Personal Dial
Contains PSD numbers. To scroll through the PSD Directory, press the NEXT or PREV buttons 
located beneath the display.
• PSD speed dial numbers must be programmed...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-41
Large-LCD Display During Idle
The large display telephone may optionally be set to return to a selected idle screen after the user goes 
on-hook. If the Large-LCD Display During Idle setting (FF3-0-BSSC-04-11-HOLD) is set to 1 
(allow), after moving to the desired menu is displayed, the user may enter ON/OFF PROG ## ON/
OFF to select the menu as the idle menu.
Small-Display Phone
Figure 5.  Small-Display...

5-42 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Do-Not-Disturb 
Description
You can make an extension unavailable by activating the Do-Not-Disturb (DND) feature. When DND 
is activated, calls to that extension receive busy tone.
You can set or cancel DND from either your extension or from an alternate extension.
Operation
To set DND for your own extension:
To cancel DND for your own extension:
To set DND for another extension:
To cancel DND for...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-43
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-0-03: Extension COS (DND Set/Clear)
• FF1-0-03: Extension COS (DND Set/Clear Other)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• Forced DND override is available.
• DND override function is available by Busy Override code.
DP to DTMF Signal...

5-44 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
DSS/72 Console
Description
The DSS/72 console is a 72-key console that can be attached to a key telephone. The 72 keys on the 
DSS/72 can be programmed as Direct Station Select (DSS) keys for internal lines.
In addition to providing direct station selection, the DSS keys also provide Busy Lamp Fields (BLFs) 
that allow you to monitor the status of other extensions. The LED lights red when the assigned...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-45
Flash
Description
You can send a flash signal on your telephone to release an outside line and then either automatically 
reseize the same outside line or switch to extension dial tone status by pressing the FLASH or PROG 
key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension 
dial tone status.
Note: The following is available for future use only:...

5-46 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To assign Fixed Feature codes to an FF key:
To assign Flexible Feature Codes to an FF key:
To erase a code stored on an FF key:
Note:You cannot use the following procedure to clear FF keys that have been assigned as CO lines. 
CO line keys can only be cleared through system programming.Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
2.   Press the PROG key.F...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-47
To check a programmed FF key (Display Phone Only):
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF3: Extension Numbers
• FF4: FF Key Assignment
Considerations
• If a new code is programmed into a key, the previously programmed code is erased.
• FF keys assigned as CO lines must be cleared using system programming before new FF 
assignments can be made.
• The System can be...

5-48 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Table 5. Feature access codes for FF key assignments
Handset Off-Hook Several held calls Latest held call will be transferred; phone gets 
internal dial tone.
No held calls Current call (talk) will be released; phone gets 
internal dial tone.
Feature DescriptionFixed Feature Code+ (additional digits to program into 
key)
Default Flexible 
Feature Code
(if not listed, must use 
Fixed Feature Code)
CO...