Home > Panasonic > Communications System > Panasonic DBS 576HD Technical Manual

Panasonic DBS 576HD Technical Manual

Here you can view all the pages of manual Panasonic DBS 576HD Technical Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 151

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-29
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Onhook Transfer at Ringback)
• FF1-0-03: Extension COS (Onhook Transfer at Talk)
• FF1-0-03: Extension COS (Onhook Transfer at Camp-on)
• FF1-0-03: Extension COS (Trunk-to-trunk On-hook Transfer Restriction)
Considerations
• If On-Hook Transfer is...

Page 152

5-30 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
• If a call is unsupervised transferred to a busy extension, the call will camp on to the busy 
extension.
• To transfer to a outside party, it is best to use supervised transfer. If the trunk-to-trunk on-hook 
transfer restriction is enabled, a blind transfer will result in the loss of the second call but the 
second call will be kept on hold. If not enabled and the second outside party is busy, the...

Page 153

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-31
Hardware Requirements
• Caller ID daughter circuit card on the Loop Start Trunk Card if a Loop Start Trunk receives the 
call.
• ISDN (PRI-T Point) if ISDN card receives the call.
• Large Display Telephone or 44-Series Small Display Telephone. 
Related Programming
• FF1-0-01-0021: Caller ID Log Outgoing
• FF1-0-01-0022: Caller ID Log Control for Private or Out of Area
• FF8-1-10: Set Caller ID Logging...

Page 154

5-32 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
The busy party can reply with a text message that displays on the camping on phone. Any one of the 
following messages can be selected. Messages 6 to 9 and 0 have no default message text. All the 
messages can be changed through system programming. (see “Set Text Message Replies” on page 4-
37 for more information on setting Text Message Replies).
Table 4. Text Message Replies
Operation
To use Automatic...

Page 155

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-33
To leave a text message while camped-on:
To reply to a text message:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual Camp-on Send)
• FF1-0-03: Extension COS (Manual Camp-on Receive)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3-0: Auto Camp-on
Considerations
• You can transfer an outside call to a busy extension using Camp-on....

Page 156

5-34 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Conference Calls
Description
Conference Calls allow you to add another party to an existing conversation. With the standard 
system configuration, up to 4 parties can be included in a conference call at any one time. If the 
optional Conference Card is installed, additional parties up to a total of 8 can participate in a 
conference call. 
Any combination of extensions and CO lines can be in the...

Page 157

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-35
•During a conference call, the extension (EXT) lamp lights on the conference originators 
telephone.
•When the conference call is placed on Conference Hold, the EXT lamp blinks on the conference 
originators telephone.
•When the conference originator adds an extension or outside line to the conference, the MCO 
key or VL (Virtual Line) key assigned to that party is turned off.
•During a conference call...

Page 158

5-36 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Figure 2.  Example Directory Number assignments for Extension 200
When a caller originates a call, the call appears on the first available PDN key. If all PDNs are 
unavailable, the call will select the EXT LED.
When calls come in to a DN, the call appears on the first available DN key. If the call is to your PDN 
and no PDN key is available, the caller hears a busy tone.
Directory numbers may be...

Page 159

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-37
Operation
To originate a call using a Primary Directory Number:
To receive a call to a Directory Number (PDN or NPDN):
To originate a call using a Non-Primary Directory Number:
To receive a call using a Non-Primary Directory Number:Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
The first available PDN key lights.
2.   If dialing an outside call, dial the outside line...

Page 160

5-38 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To call a Primary Directory Number extension (NPDNs not called):
To transfer a call to the Primary Directory Number extension (NPDNs not called):
To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:
Note:FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Hardware Requirements
•N/A
Related Programming
• FF4-0-: FF Keys (PDN and NPDN Assignment)
• FF1-2-01: Dial Plan...
Start reading Panasonic DBS 576HD Technical Manual

Related Manuals for Panasonic DBS 576HD Technical Manual

All Panasonic manuals