Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-59
Operation
Hardware Requirements
•N/A
Related Programming
• FF4: Key Assignment
Considerations
•N/A
Multi-CO (MCO) Appearances
Description
You can make and receive CO line calls using a Multi-CO (MCO) key. Each extension can have up to 
5 MCO keys. 
An MCO key can be assigned to any of the pooled trunk groups. Pressing the MCO key is the same as 
dialing the MCO Access Code (usually 9, 81-84).
Operation...

5-60 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Related Programming
• FF1-0-02: ARS for MCO Access Code 1/Route Advance for MCO Access Code
• FF1-3: MCO Group
• FF5-2: MCO Outgoing Trunk Assignments
• FF5-3: MCO Incoming Trunk Assignments
• FF4: FF Key Assignments
Considerations
• Press the MCO key that flashes red to answer an outside call.
• If you are already on a call appearing on an MCO key and you press another MCO key, a line on 
the other MCO...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-61
Operation
To automatically call back an extension that left a message or to access Voice Mail:
Hardware Requirements
•N/A
Related Programming
• FF8-1: Voice Mail ID Code
Considerations
•The Message lamp lights when a message has been received.
• If more than one callback message has been received, pressing the MSG key performs auto-
callback in the order received.
•The MSG key works only when the phone...

5-62 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To answer a message waiting indication (callback):
To cancel a callback message:
Note:Message waiting/callback messages may also be cancelled by either the originator or the 
receiver by calling the other party.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
• FF1-2: Dial Plan
• FF3: Extension...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-63
Mute Function
Description
Mute Function allows you to block outgoing audio to the other party while on a call.
With 44-Series phones, audio can be blocked through both the microphone and the handset. (For 
handset mute, an FF key must first be assigned as a MUTE key.)
Operation
To block outgoing audio using the Handset Mute (44-Series phones only):
To block outgoing audio using the Microphone Mute:...

5-64 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To put a call on speaker using the Offhook Monitor:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Offhook Monitor
Considerations
• Offhook Monitor is available on 44-Series phones only.
• Offhook Monitor can be disabled system-wide.
Offhook Signaling
Description
Offhook Signaling sends a tone to a busy extension to indicate that another CO call has arrived or a 
call is camped-on....

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-65
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be multiple ring, direct, BLF Ring, or camp-on.
• The System does not send the offhook signal under the following conditions:
•   During a conference call
•   During an OHVA or Busy override
•   Data Privacy is enabled
•   the receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
Description
You can...

5-66 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To make an OHVA :
To answer an OHVA: 
To transfer a call using OHVA:Action Result
1.   Lift the handset or press the ON/OFF key.
2.   Dial the extension number. Busy signal
3.   Enter the OHVA feature access code (default = 8).•   OHVA EXT XXX displays if busy 
extension called (where XXX = calling 
extension.
•   EXT LED flashes
4.   Make your announcement
Action Result
1.   Press the OHVA...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 5-67
To reply to off-hook voice announcement with a text message:
To answer a call after it has been announced using the OHVA:
Hardware Requirements
•N/A
Related Programming
• FF1 0 03: Extension COS OHVA Originate
• FF1 0 03: Extension COS OHVA Receive
• FF3: Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• The held call is transferred as soon as the extension sending the OHVA hangs up.
•...

5-68 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To program a one-touch key for outside telephone numbers:
To assign an System Speed Dial (SSD) numbers to a one-touch key:
To chain 2 to 6 SSD numbers to a single one-touch key:Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
2.   Press the PROG key.
3.   Press the one-touch key to be programmed.
4.   Dial the phone number to be stored.
5.   Press the HOLD key.
6....