Panasonic Cpc+AII/B Digital Business System Release Notes Manual

sectton IUU - uperarlonb~~apiar L. 3y3te111 raaiuras
same DNIS number and both ports do not answer a delayed ringing call, the
call follows the call forwarding settings of port 125.
*.= .-
OS Text Name Assignment
(CPC-B Version 5.0 or higher)Description
DID/DNIS Text Name Assignment allows the assignment of text names to
specific 
DID/DNIS numbers. The text name can include up to six characters.
Text name assignments are especially 
useikl when multiple DID or DNIS
lines terminate to the same extension...

-..-I---. -- -a_ .-.. ---- I- -.--.-”
DIDIDNIS to a Voice Mailbox
(CPC-B Version 6.0 and higher)Description
DID/DNIS to a voice mailbox allows DWDNIS calls to be routed to a voice
mailbox that is not connected to a physical extension.
To implement this feature, the 
DIDDKIS trunks must be assigned to ring at
the voice mail system. Once voice mail answers, the DBS sends a 
DID/DNIS
Answer Code required by the voice mail system plus the final DID/DNIS
digits to the voice mail system. The 
DIDDNIS Answer...

Section 700 - OperationChapter 2. System Features
To delete a DID/DNIS Answer Code:
1.Pick up the receiver or press the ON/OFF key.2. Press PROG.
3. Dial 
#95.4. Press HOLD.
5.Press the ON/OFF key.
The ON/OFF LED goes off.
Related Programmingl
FFl (System): Number of DID/DNIS Digits to Voice Mail
l FFl (System): DID/DNIS Flexible Ringing Assignments
Considerations
DIDIDNIS digit transmission. The DID/DNIS digits are only sent to ports
that are assigned as voice mail.
Answer code enby. The DIDPNIS Answer...

Lriapter 2. system teaturesSecnon /UO - Uperation
Direct Inward System Access (DISA)
(All Versions)
Description
Direct Inward System Access (DISA) gives off-site users dial-in access to the
DBS. Users access 
DISA by dialing a ‘I-digit number assigned to a DISA
trunk.
For security reasons, one incoming DISA code and two outgoing DISA codes
can be assigned. If an incoming code is assigned, it must be entered as soon as
the DISA trunk answers. An outgoing code must be entered before the user
dials an...

Section 700 - OperationChapter 2. System Features
l FF1 (System): DISA Outbound Call ID Code 1l
FFl (System): DISA Outbound Call ID Code 2
l FF2 (Trunk): DISA Auto Answer
l FF2 (Trunk): DISA Start Tie
l FF2 (Trunk): DISA End Time
To program an incoming code from an attendant phone:
In addition to the DISA ID Setting in FFl, the following procedure can be
used to program an incoming code.
1.Press the ON/OFF key.
l The phone issues intercom dial tone.
l The ON/OFF LED lights.
2.Press the CONF key.3. Dial...

Chapter 2. System FeaturesSection 700 - Operation
Direct Trunk Access
(All Versions)Description
Extensions can access a specific trunk for outgoing calls. Extensions can also
use Direct Trunk Access to test trunks or to access data trunks.
Operation
1.Press the ON/OFF key:
l The phone issues intercom dial tone.
l The ON/OFF LED lights.
2.Dial “88,” then enter the desired line number (01-64).
l The phone issues outside dial tone.
l “CO TALK #XX” (where “XX” is the line number) appears on the
display.3....

Section 700 - OperationChapter 2. System Features
Hardware Requirements
lSCC-B Version 1.2 or higher is required for this feature.
Considerations
lOne of ten ringing patterns can be selected.l
The ringing patterns are different for key phones and SLT/OPX phones.
Door Box (Using Extension Adaptor)
(CPC-B Version 7.0 and higher and CPC-A II Version 7.0 and higher)
Description
Door boxes (also called door phones) and door openers work together. The
door box is an intercom that allows visitors to announce...

Chapter 2. System FeaturesSection 700 - Operation
2.While still connected to the call, dial:
#3 XXX NNNN * (where XXX is the Door Box extension number and
NNNN is the Door Opener Access Code, if required - 9999 by default)
3.The door will unlock. Listen for the person to enter the building before
hanging up.
Related programming
Hardware
lFF4 (Ringing and Hunt Groups): Ringing Assignments (all)
lFFl (System Programming): Door Phone Assignments (all)
lFFl (System Programming): Door Opener ID Requirement...

Section 700 - OperationChapter 2. System Features
Door Box (Using Trunk Adaptor)
(All Versions)Description
Door Boxes (also called door phones) and door openers work together. The
door box is an intercom that allows visitors to announce their presence from
the office door. The door opener enables a user to unlock the door using a
telephone. Door openers are not sold by Panasonic: they can be purchased
separately from an electronics dealer.
There are two types of door box adaptors available for the DBS....

Chaoter 2. Svstem FeaturesSection 700 - OoerationlWhile the Door Opener is functioning, a call from another Door Box on the
same door box adaptor cannot be answered.
ConsiderationslThe trunk connected to the Door Box Adaptor must be set to dial pulse.
Sensor
(All Versions)
DescriptionThe sensor is a device that detects when a circuit is opened or closed. Sensors
can be used to detect events such as the opening of windows or doors. Whenthe sensor is tripped, a tone sounds at a designated extension....