Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Section 700 - Operation
Chapter 2. System Features
4.Enter the Answer Signal Code (1 to 5 digits).
5.Press the HOLD key.
To view an answer signal code:
1.Press the ON/OFF key.
2. Press the CONF key.3. Dial 
“#94.”
Considerations
lThe digits used for the answer signal code are determined by the
requirements of the voice mail system.
lIf the called extension does not answer and is forwarded to voice mail, the
DBS sends a call forward ID code back to the voice mail system.
lDuring transmission of the answer...

Chapter 2. System Features
Section 700 - Operation
Related Programming
lFFl (System): Automatic Day Mode Start Time
lFFl (System): Automatic Night Mode Start Time
Considerations
lIf both auto modes are set, the starting times must differ by at least one
hour.
lWhen one auto mode is turned on, the mode cannot be reset by the NIGHT
key until 3 minutes after the auto mode is activated. (When both auto
modes are set, the 
NIGHT key cannot be used.)
lIf a NIGHT key is not assigned, the access code #52 can be...

Section 700 - OperationChapter 2. System Features
Background Music
(All Versions)
Description
If your system is set up to provide Background Music, music can be played
from the speakers of idle telephones. If a call is made to an extension
receiving Background Music, the music stops and the phone rings.
Background Music is also interrupted when the phone goes 
offhook.
The system can also provide music-on-hold using the Background Music
source or a separate music source. If Music-on-Hold is provided,...

Chapter 2. System Features
Section 700 - Operation
l The ON/OFF LED goes off.
l The date and time appear on the display.
Related Programming
lFFl (System) Extension Class of Service Setting (CPC-AI1 and CPC-B 3.1
or higher)
lFF3 (Extension) Extension Class of Service Assignment (CPC-AlI CPC-B
3.1 or higher)
Hardware Requirements
A.
The music source must be purchased separately. It is not provided with the
DBS.
If a single music source is used for both Music-on-Hold and Background
Music, the music source...

Sectron /uu - uperatronc;napter L. sysrem Features
Call Forward ID Code for Voice Mail
(CPC-A Version 3.1. CPC-AII, and all CPC-B Versions)
Descriptim
.Call Forward ID Code for Voice Mail allows users to call forward to a third-
party voice mail system. The ID Code sends the digits that are required by the
voice mail to 
identify the DBS extension and allow it to retrieve messages.
With CPC-A or CPC-B Version 1 .O, you can only set the ID Code from the
phone to be forwarded. Beginning with CPC-B Version...

Considerations
lIn CPC-A 3.1 and CPC-B Versions prior to 5.0, callers could hear the tones
as the ID code was transmitted to the voice mail system. Beginning with
CPC-A Version 3.3, 
CPC-AI1 and CPC-B Version 5.0, external callers do
not hear the tones.l
The Extension Copy program (FF9 2# 1 - 144#1 - 144##) should not be
used to copy extension settings that include a Call Forward ID Code.
Copying extension settings in this manner allows the copy “destination” to
retrieve the messages of the copy...

“““IIVII * “Y.syv.w..*v*.-..- r.-’ -. -, ---... . --.-. _”
Considerationsl
Caller ID service must be ordered from the local telephone operating
company or the interexchange carrier.Caller ID’ Auto 
DISA
(CPC-A II Version 6.1 or higher and CPC-B Version 6.1 or higher)
Descfip tion
A DBS equipped for Caller ID (CID) can provide automatic DISA dial tone
based on Caller ID information. This allows up to 10 predetermined users to
access the DISA feature without requiring a trunk be 
left in the DISA mode....

Centrex/PBX Compatibility(CPC-A Version 3.2 or higher. CPC-AII, and CPC-B Version 2.1 or higher)Description
Centrex/PBX Compatibility allows the DBS to be connected to centrex or
PBX lines.
The DBS supports up to 8 access codes for dialing 
centrex or a PBX. These
access codes allow the DBS SMDR output to exclude the number dialed to
reach a 
centrex or PBX line.
The DBS also supports transmission of a flash signal over the 
centrex or PBX
link.Related Programming
l FFl (System): PBX Access Code(s)
l FF2...

Section 700 - OperationChapter 2. System teatures
Related Programming
l FFl (System): Multiple DID (CPC-B Version 3.1 or higher)l
FF3 (Extension): Inbound DID Dial Number (CPC-B Version 2.0 to 2.16)l
FF4 (Ring): DID, Delayed, Night , Delayed Night, Night 2, and Delayed
Night 2 Ring AssignmentsHardware Requirements
l
Either the T-l Card or DID trunk card is required. Each DID trunk card
provides 8 ports.l
The DID trunk card requires an external 48V power supply. See
Installation (Section 300) for...

c;naprer L. bysrem reaIures3ecvon Iuu - uperarlonDID Delayed Ringing
(CPC-B Version 5.0 or higher)
Descripfioht
For a description of this feature, see “DIDDNIS Flexible Ring Assi,onments”
on page 2-18.
DID/DNIS Flexible Ring Assignments
(CPC-B Version 5.0 or higher)Description
DID/DMS Flexible Ring Assignments allow night ringing and delayed
ringing for specific 
DIIYDNIS numbers.Related Programming
l FFl (System): Delayed Ring
l FFl (System): Central Office Delayed Ring Timer
l FFl (System): Inbound DID...