Panasonic Color Cctv Camera Wv Cw974 Operating Instructions

-51-
3. Move the cursor to NEW PASSWORD and press the
CAM (SET) button to display the password setting
menu. 
The password input screen will reappear if you
press the CAM (SET) button after inputting the
wrong password. If this happens, perform steps 2
and 3 again.
4. Input the new 3-digit password by moving the
cursor to each of the applicable numbers along the
top of the screen (0 to 9) and pressing the CAM
(SET) button for each digit. 
After you input all three digits, move the cursor to
OK. 
5. Press...

-52-
Shortcuts
Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button. 
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the
camera to a preset position by inputting the applicable position number on the 10-key pad. 
Notes:
• Turn off digital flip before...

-53-
Controller Operation Setting 
[1] + [7] + [0] + [CAM FUNCTION] IRIS: CLOSE
[1] + [7] + [1] + [CAM FUNCTION] SHUTTER: ON
[1] + [7] + [2] + [CAM FUNCTION] SHUTTER: OFF
[1] + [7] + [3] + [CAM FUNCTION] Increases shutter speed one step. 
[1] + [7] + [4] + [CAM FUNCTION] Decreases shutter speed one step. 
[1] + [7] + [5] + [CAM FUNCTION] AGC: ON
[1] + [7] + [6] + [CAM FUNCTION] AGC: OFF
[1] + [7] + [7] + [CAM FUNCTION] SENS UP: FIX ON
[1] + [7] + [8] + [CAM FUNCTION] SENS UP: FIX OFF
[1] + [7] + [9] +...

Troubleshooting
Before requesting service, check the following symptoms to see if you can solve the problem yourself. 
If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not
covered here, contact a quality service person or system installer. 
-54-
ProblemCause and Recommended ActionReference Pages
No picture (dark screen)
• Is the camera connected correctly? Check the
operating instructions that come with your system
controller. 
—
• Is the lens...

-55-
ProblemCause and Recommended ActionReference Pages
Poor picture color 
• Is the dome cover or lens of the camera dirty? If so,
clean them. 8
• Use the special setup menu to adjust picture
quality.47-48
• Check the white balance setting. 30
Image flicker • If Super Dynamic 3is turned on, turn it off. 28-29
Afterimages in 
the picture • Check the DNR setting.  31
Black and white picture• The camera has an auto black and white switching
mode function. Check the setting of this mode. 31
Frequent...

-56-
Menu settings will not
change. • Is the password lock function turned on?50
I forgot the password. • Contact a quality service person or system installer. —
Picture does not switch
to black and white. • Switching is not performed when the ALARM IN 4
setting is BW. Check the setting. 46
Pan, tilt, zoom, or focus
do not work. 
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using. 
—
• The camera has a pan limit function. Check the
PAN...

The camera movement
mode (OFF, SEQ,
SORT, AUTO PAN,
PATROL, AUTO
TRACK) setting
changes.   
• Check the self return function. 35
ProblemCause and Recommended ActionReference Pages
Camera position is
different from the
preset position setting. 
• Perform REFRESH from the special setup menu. 48
Picture is different from
the position setting. • Adjust the picture using the preset menu and a
scene file. 25-26
Upper part of the picture
is black when the camera
is in a horizontal
orientation. • This is caused...

-58- • Check the camera installation height setting.
An incorrect installation height setting can cause
malfunction.
Input the camera and target area heights correctly.
41
• Check if it is raining or snowing. 
Raindrops or other precipitation on the dome can
cause misoperation.
—
• SENSITIVITY may be set too high.
Use a lower SENSITIVITY setting.41
• Check if ON is selected for the STABILIZER setting. 
When STABILIZER is ON, auto tracking may start
when there is image shake. 
Turn STABILIZER OFF.
32
Auto...

●General
Power Requirements 24 V AC, 60 Hz
Power Consumption 17 W (for camera), 62 W (for heater)
Pick-up Device 1/4-type {1/4} interline transfer CCD
Effective Pixels 768 (H) ×494 (V)
Scanning Area 3.65 mm (H) ×2.74 mm (V)
Signal NTSC
Synchronization Internal (INT), multiplexed vertical drive (VD2), line-lock (LL)
Scanning 2:1 interlace
Scanning Frequencies Horizontal: 15.734 kHz, Vertical: 59.94 Hz
Video Output VBS: 1.0 V [P-P]/75 Ω(BNC plug)
Resolution (Center) Horizontal : 480 TV lines minimum (color...

●Auto Tracking Functions
Control System PAN, TILT, ZOOM linked
Height Setting 2.5 to 30.0 meters
Target size  Approximately 1/4 to 3/4
Detection sensitivity LOW, MID, HIGH
Zoom control  OFF, INTERMIT, CONTINUOUS
Area Masks ALARM/MASK 8 total
Lost Setting STOP, RESEACH, ZOOM-OUT
Alarm Setting OFF, ON, CONT, AREA
Target Frame OFF, CANDIDATE, TARGET, ON
●Main Functions
Controller Interface Coaxial Multiplex System, RS485
Control Functions Pan and tilt, zoom and focus, 256 preset positions, home position,...