Home > Panasonic > Security Camera > Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions

Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 110
    Add page 21 to Favourites
    image text
    Enable zoom 
    							21
Screenshot 2
The setup mode changes to ENABLE, and
the setup menu becomes ready to be set.Step 3
Move the cursor to the item to be set, and
press the setting button.
Screenshot 1
Hold down the setting button for approx. 2
seconds to call up the top screen of the
setup menu.Step 1
Press the up button or the down button to
move the cursor to END.
Step 2
Press the right button to move the cursor to
SETUP, and press the setting button to
change the setup mode from DISABLE to
ENABLE. MODEL   WV-CL930 SERIES
CAMERA   
BACK-FOCUS   
SPECIAL
LANGUAGE
 
 END   SETUP DISABLE
 MODEL   WV-CL930 SERIES
CAMERA   
BACK-FOCUS   
SPECIAL
LANGUAGE
 
 END   SETUP ENABLE
Basic operation
The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons (page 9) after
calling up the setup menu on the connected video monitor.
The operations in the setup menu can also be performed through the system controller (option).
    Add page 22 to Favourites
    image text
    Enable zoom 
    							22
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Notes:
• If the top screen of the setup menu is
called up while a camera image is dis-
played, the setup mode is always DIS-
ABLE to prevent operation errors. To
perform settings in the setup menu,
change the setup mode to ENABLE.
• The cursor is a reversely highlighted
part.
Step 4
Perform the settings for each item.
•Selection of setting item:
Press the up button or down button to
move the cursor.
•Change of settings:
Press the right button or left button.
•Display of advanced setup screen:
Press the setting button when O is
attached to the target setting item.
•Return to previous setup screen:
Move the cursor to RET and press the
setting button.
•Return to top screen:
Move the cursor to TOP and press the
setting button.
Step5
To return to the camera image screen, move
the cursor to END and press the setting but-
ton.
    **CAMERA SETUP** 1/2
CAMERA ID    OFF    
ALC/ELC      ALC    
SHUTTER      OFF
AGC          ON
SENS UP      OFF
SYNC         INT
WHITE BAL    ATW1
MOTION DET   OFF
DNR          HIGH
RESOLUTION   HIGH    
BW MODE
    **CAMERA SETUP** 2/2
PRIVACY ZONE OFF    
MIRROR       OFF
LENS-DRIVE   DC
STABILIZER   OFF
 RET TOP END
    Add page 23 to Favourites
    image text
    Enable zoom 
    							23
Camera Operation Setup [CAMERA SETUP]
The following describes the camera operation settings. The following settings are performed on
the CAMERA SETUP screen through the top screen. Refer to page 21 for how to call up the
screen.
1. Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that indicates the camera location and
other information about the camera is created with alphanumeric characters and symbol, and
displayed on the screen. The camera title is named with up to 16 characters. Follow the proce-
dure below to specify the camera title.
qw
r
y
i
!0
e
t
u
o
!1
    **CAMERA SETUP** 1/2
CAMERA ID    OFF    
ALC/ELC      ALC    
SHUTTER      OFF
AGC          ON
SENS UP      OFF
SYNC         INT
WHITE BAL    ATW1
MOTION DET   OFF
DNR          HIGH
RESOLUTION   HIGH    
BW MODE!2!3
!5!4
    **CAMERA SETUP** 2/2
PRIVACY ZONE OFF    
MIRROR       OFF
LENS-DRIVE   DC
STABILIZER   OFF
 RET TOP END
    **CAMERA SETUP** 1/2
CAMERA ID    OFF    
ALC/ELC      ALC    
SHUTTER      OFF
AGC          ON
SENS UP      OFF
SYNC         INT
WHITE BAL    ATW1
MOTION DET   OFF
DNR          HIGH
RESOLUTION   HIGH    
BW MODE     CAMERA ID
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-*/%$
    SPACE POSI
    RET TOP END RESET
    ................
Editing areaFLOOR 1
Step 1
Set CAMERA ID to ON and press the set-
ting button.
→The title creation screen appears.Step 2
Move the cursor to the target item with use of
the up, down, right, and left buttons, and
press the setting button to enter the charac-
ter.
→The entered characters are displayed in
the editing area. CAMERA SETUP screen Title creation screen Display positioning screen
    Add page 24 to Favourites
    image text
    Enable zoom 
    							24

• To revise a character, move the cursor to
the arrow (↑) in the editing area, move
the cursor (↑) to the character to be
revised with use of the right and left but-
tons, and enter a correct character.
• To enter a blank, move the cursor to
SPACE and press the setting button. 
• To delete all the entered characters,
move the cursor to RESET and press
the setting button.
Step 3
Move the cursor to POSI and press the set-
ting button after title entry. 
→The display positioning screen appears.
Step 4
Use the up, down, right, and left buttons to
decide the title position and press the setting
button. 
→The camera title and title position are
specified.
    Add page 25 to Favourites
    image text
    Enable zoom 
    							25
2. Method of controlling quantity of light [ALC/ELC]
The method of controlling the quantity of light is selected from the following in accordance with
the lens to be used. 
ALC (default):Adjusts the iris of the lens in accordance with the brightness of a subject. This
selection is suitable for use of an auto iris lens (ALC lens). 
ALC+:Controls the quantity of light with a combination of the electronic shutter and auto iris.
This selection is suitable at shooting a bright subject such as an outdoor subject with auto
iris lens. Be aware that flicker may occur when a subject is under fluorescent lighting. 
ELC:Fixes the iris of the lens to a set value. This selection is suitable for use of a lens with fixed
iris or manual iris. 
Backlight compensation
• If a subject has a bright light such as a spotlight in its background, the subject appears
shadowy because the camera adjusts the iris in accordance with the bright area. 
• To eliminate this phenomenon, masking bright areas allows users to perform backlight
compensation to hide bright areas.  
• Backlight compensation has two modes: One is the PRESET ON mode for automatic com-
pensation after sensing the light conditions on the camera side, the other is PRESET OFF
mode for specifying the sensing area manually. 
NighttimeNighttimeDaytimeDaytime
[No backlight compensation performed][Backlight compensation performed]
    Add page 26 to Favourites
    image text
    Enable zoom 
    							26
PRESET mode setting
Step 1
Move the cursor to ALC, ALC+, or ELC of
ALC/ELC and press the setting button. 
→The ALC CONT, ALC+CONT or ELC
CONT screen appears.
Step 2
Move the cursor to PRESET and use the
right or left button to select ON or OFF. 
ON:Automatically performs backlight com-
pensation. 
OFF:Performs backlight compensation after
specifying the compensation area. 
When OFF is selected, MASK SET
appears on the ALC CONT, ALC+
CONT or ELC CONT screen. (page
27)
Step 3
To change the video output level (image con-
trast), move the cursor to LEVEL and adjust
the level with use of the right or left button. 
    **CAMERA SETUP** 1/2
CAMERA ID    OFF    
ALC/ELC      ALC    
SHUTTER      OFF
AGC          ON
SENS UP      OFF
SYNC         INT
WHITE BAL    ATW1
MOTION DET   OFF
DNR          HIGH
RESOLUTION   HIGH    
BW MODE
      **ELC CONT**
     BACK LIGHT COMP   
   
PRESET        ON
PEAK MODE     OFF
LEVEL         ...
|...128
              -     +
 
 RET TOP END
      **ALC CONT**
     BACK LIGHT COMP   
   
PRESET        OFF
PEAK MODE     OFF
MASK SET
LEVEL         ...
|...128
              -     +
 
 RET TOP END
CAMERA SETUP screen
ALC CONT screen
ELC CONT screen
      **ALC+CONT**
     BACK LIGHT COMP   
   
PRESET        OFF
PEAK MODE     OFF
MASK SET
LEVEL         ...
|...128
              -     +
 
 RET TOP END
ALC+CONT screen
    Add page 27 to Favourites
    image text
    Enable zoom 
    							27
Sensing area setting for backlight compensation
If backlight compensation does not function desirably in the PRESET ON mode, use the PRE-
SET OFF mode, mask too bright areas manually and perform backlight compensation.
      **ALC CONT**
     BACK LIGHT COMP   
   
PRESET        OFF
PEAK MODE     OFF
MASK SET
LEVEL         ...
|...128
              -     +
 
 RET TOP END
      **ELC CONT**
     BACK LIGHT COMP   
   
PRESET        OFF
PEAK MODE     OFF
MASK SET
LEVEL         ...
|...128
              -     +
 
 RET TOP END
ALC CONT screen
ELC CONT screen
Mask setting screen
Step 1
Move the cursor to PRESET and use left or
right button to select OFF. 
Step 2
Move the cursor to MASK SET and press
the setting button to call up the mask screen.
The mask setting screen shows 48-split
areas and blinks the top and far left split
area. 
Step 3
Mask bright areas in the background. 
qMove the blinking portion to the area to
be masked with use of the right or left
button.
wPress the setting button to mask the
area. When the blinking portion is pres-
ent on the masked area, the masked
area is displayed with horizontal stripes
and white alternately. 
When the blinking portion is present on
other areas, the masked area becomes
white.
eRepeat the operation wdescribed
above until masking is completed, and
hold down the setting button for more
than 2 seconds to resume the previous
screen.
To cancel the masking, move the blinking
portion to the masked area and press the
setting button. 
Step 4
To change the video output level (image con-
trast), move the cursor to LEVEL and adjust
the level with use of the right or left button.
      **ALC+CONT**
     BACK LIGHT COMP   
   
PRESET        OFF
PEAK MODE     OFF
MASK SET
LEVEL         ...
|...128
              -     +
 
 RET TOP END
ALC+CONT screen
    Add page 28 to Favourites
    image text
    Enable zoom 
    							28
Flare compensation mode 
If a lens flare is undesirable, move the cursor to PEAK MODE and use right or left button to
select ON. 
ON:Performs flare compensation. 
OFF (default):Does not perform flare compensation. 
3. Electronic shutter setting [SHUTTER]
The variation in electronic shutter speed allows users to perform the following. 
• Increased shutter speed prevents blurring fast-moving subjects.  
The electronic shutter speed is selectable from the following: 
OFF (1/60)(default), 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and 1/10 000
Notes:
• When ALC/ELC is set to ELC or ALC+ (page 25), the shutter setting cannot be per-
formed.  OFF (1/60) is automatically selected.
• If the controller, WV-CU254 or WV-CU204 is used, SW LED and the status of SHUTTER
are not correctly displayed.
    Add page 29 to Favourites
    image text
    Enable zoom 
    							29
Step 1
Move the cursor to AGC and use right or left
button to select ON or OFF. 
ON (default):Automatically increases the
gain to make the screen brighter when
the illuminance of the subject becomes
darker. The maximum value is adjust-
able. 
OFF:Does not increase the gain. (The nor-
mal image remains.) 
Step 2
Move the cursor to ON and press the set-
ting button to call up the AGC MAX screen.  
Step 3
Move the cursor to LEVEL. The cursor is
reversely highlighted.
Move the cursor horizontally to adjust the
gain with use of the right or left button. 
Notes:
• Change in the level of AGC MAX caus-
es change in the level of the input signal
that enables electronic sensitivity
enhancement when SENS UP is set to
AUTO and also change in the level of the
input signal that activates black-and-
white mode.
• If noise is undesirable, adjust the level of
AGC MAX.
    **CAMERA SETUP** 1/2
CAMERA ID    OFF    
ALC/ELC      ALC    
SHUTTER      OFF
AGC          ON
SENS UP      OFF
SYNC         INT
WHITE BAL    ATW1
MOTION DET   OFF
DNR          HIGH
RESOLUTION   HIGH    
BW MODE
    ** AGC MAX **
LEVEL         ...|...128
              -     +
 RET TOP END
CAMERA SETUP screen
AGC MAX screen
4. Gain control setting [AGC]
    Add page 30 to Favourites
    image text
    Enable zoom 
    							30
5. Electronic sensitivity enhancement setting [SENS UP]
Use of the electronic sensitivity enhancement function increases the quantity of light stored on
the CCD, and accordingly the image becomes brighter. The magnification is unchanged for
selection of FIX, and the magnification is changeable in accordance with the illuminance of a
subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from
the following. 
OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16 AUTO/X32 AUTO/X2 FIX/
X4 FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX
Notes:
• When the magnification of SENS UP is increased, the screen becomes coarser, more
whitish, or more flawed. However, this phenomenon is normal. 
• The status display of the system device does not show X64 FIX and X128 FIX of SENS
UP. In such cases, X32 FIX is shown. 
• If the controller, WV-CU254 or WV-CU204 is used, SW LED and the status of SENS UP are
not correctly displayed.
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions