Home
>
Panasonic
>
Security Camera
>
Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions
Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions
Here you can view all the pages of manual Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 21
21 Screenshot 2 The setup mode changes to ENABLE, and the setup menu becomes ready to be set.Step 3 Move the cursor to the item to be set, and press the setting button. Screenshot 1 Hold down the setting button for approx. 2 seconds to call up the top screen of the setup menu.Step 1 Press the up button or the down button to move the cursor to END. Step 2 Press the right button to move the cursor to SETUP, and press the setting button to change the setup mode from DISABLE to ENABLE. MODEL WV-CL930...
Page 22
22 Screenshot 3 The selected setup screen in the setup menu appears on the screen. Notes: • If the top screen of the setup menu is called up while a camera image is dis- played, the setup mode is always DIS- ABLE to prevent operation errors. To perform settings in the setup menu, change the setup mode to ENABLE. • The cursor is a reversely highlighted part. Step 4 Perform the settings for each item. •Selection of setting item: Press the up button or down button to move the cursor. •Change of settings:...
Page 23
![Page 23
23
Camera Operation Setup [CAMERA SETUP]
The following describes the camera operation settings. The following settings are performed on
the CAMERA SETUP screen through the top screen. Refer to page 21 for how to call up the
screen.
1. Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that indicates the camera location and
other information about the camera is created with alphanumeric characters and symbol, and
displayed on the screen. The camera title is named with...](http://img.usermanuals.tech/thumb/58/72252/w300_wv-cl930series_oi_d-22.png "Page 23
23
Camera Operation Setup [CAMERA SETUP]
The following describes the camera operation settings. The following settings are performed on
the CAMERA SETUP screen through the top screen. Refer to page 21 for how to call up the
screen.
1. Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that indicates the camera location and
other information about the camera is created with alphanumeric characters and symbol, and
displayed on the screen. The camera title is named with...")
23 Camera Operation Setup [CAMERA SETUP] The following describes the camera operation settings. The following settings are performed on the CAMERA SETUP screen through the top screen. Refer to page 21 for how to call up the screen. 1. Camera title setting [CAMERA ID] This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumeric characters and symbol, and displayed on the screen. The camera title is named with...
Page 24
24 • To revise a character, move the cursor to the arrow (↑) in the editing area, move the cursor (↑) to the character to be revised with use of the right and left but- tons, and enter a correct character. • To enter a blank, move the cursor to SPACE and press the setting button. • To delete all the entered characters, move the cursor to RESET and press the setting button. Step 3 Move the cursor to POSI and press the set- ting button after title entry. →The display positioning screen appears. Step 4...
Page 25
![Page 25
25
2. Method of controlling quantity of light [ALC/ELC]
The method of controlling the quantity of light is selected from the following in accordance with
the lens to be used.
ALC (default):Adjusts the iris of the lens in accordance with the brightness of a subject. This
selection is suitable for use of an auto iris lens (ALC lens).
ALC+:Controls the quantity of light with a combination of the electronic shutter and auto iris.
This selection is suitable at shooting a bright subject such as an outdoor...](http://img.usermanuals.tech/thumb/58/72252/w300_wv-cl930series_oi_d-24.png "Page 25
25
2. Method of controlling quantity of light [ALC/ELC]
The method of controlling the quantity of light is selected from the following in accordance with
the lens to be used.
ALC (default):Adjusts the iris of the lens in accordance with the brightness of a subject. This
selection is suitable for use of an auto iris lens (ALC lens).
ALC+:Controls the quantity of light with a combination of the electronic shutter and auto iris.
This selection is suitable at shooting a bright subject such as an outdoor...")
25 2. Method of controlling quantity of light [ALC/ELC] The method of controlling the quantity of light is selected from the following in accordance with the lens to be used. ALC (default):Adjusts the iris of the lens in accordance with the brightness of a subject. This selection is suitable for use of an auto iris lens (ALC lens). ALC+:Controls the quantity of light with a combination of the electronic shutter and auto iris. This selection is suitable at shooting a bright subject such as an outdoor...
Page 26
26 PRESET mode setting Step 1 Move the cursor to ALC, ALC+, or ELC of ALC/ELC and press the setting button. →The ALC CONT, ALC+CONT or ELC CONT screen appears. Step 2 Move the cursor to PRESET and use the right or left button to select ON or OFF. ON:Automatically performs backlight com- pensation. OFF:Performs backlight compensation after specifying the compensation area. When OFF is selected, MASK SET appears on the ALC CONT, ALC+ CONT or ELC CONT screen. (page 27) Step 3 To change the video output...
Page 27
27
Sensing area setting for backlight compensation
If backlight compensation does not function desirably in the PRESET ON mode, use the PRE-
SET OFF mode, mask too bright areas manually and perform backlight compensation.
**ALC CONT**
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL ...
|...128
- +
RET TOP END
**ELC CONT**
BACK LIGHT COMP
PRESET OFF
PEAK MODE OFF
MASK SET
LEVEL ...
|...128...
Page 28
![Page 28
28
Flare compensation mode
If a lens flare is undesirable, move the cursor to PEAK MODE and use right or left button to
select ON.
ON:Performs flare compensation.
OFF (default):Does not perform flare compensation.
3. Electronic shutter setting [SHUTTER]
The variation in electronic shutter speed allows users to perform the following.
• Increased shutter speed prevents blurring fast-moving subjects.
The electronic shutter speed is selectable from the following:
OFF (1/60)(default), 1/120, 1/250,...](http://img.usermanuals.tech/thumb/58/72252/w300_wv-cl930series_oi_d-27.png "Page 28
28
Flare compensation mode
If a lens flare is undesirable, move the cursor to PEAK MODE and use right or left button to
select ON.
ON:Performs flare compensation.
OFF (default):Does not perform flare compensation.
3. Electronic shutter setting [SHUTTER]
The variation in electronic shutter speed allows users to perform the following.
• Increased shutter speed prevents blurring fast-moving subjects.
The electronic shutter speed is selectable from the following:
OFF (1/60)(default), 1/120, 1/250,...")
28 Flare compensation mode If a lens flare is undesirable, move the cursor to PEAK MODE and use right or left button to select ON. ON:Performs flare compensation. OFF (default):Does not perform flare compensation. 3. Electronic shutter setting [SHUTTER] The variation in electronic shutter speed allows users to perform the following. • Increased shutter speed prevents blurring fast-moving subjects. The electronic shutter speed is selectable from the following: OFF (1/60)(default), 1/120, 1/250,...
Page 29
29 Step 1 Move the cursor to AGC and use right or left button to select ON or OFF. ON (default):Automatically increases the gain to make the screen brighter when the illuminance of the subject becomes darker. The maximum value is adjust- able. OFF:Does not increase the gain. (The nor- mal image remains.) Step 2 Move the cursor to ON and press the set- ting button to call up the AGC MAX screen. Step 3 Move the cursor to LEVEL. The cursor is reversely highlighted. Move the cursor horizontally to...
Page 30
![Page 30
30
5. Electronic sensitivity enhancement setting [SENS UP]
Use of the electronic sensitivity enhancement function increases the quantity of light stored on
the CCD, and accordingly the image becomes brighter. The magnification is unchanged for
selection of FIX, and the magnification is changeable in accordance with the illuminance of a
subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from
the following.
OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16...](http://img.usermanuals.tech/thumb/58/72252/w300_wv-cl930series_oi_d-29.png "Page 30
30
5. Electronic sensitivity enhancement setting [SENS UP]
Use of the electronic sensitivity enhancement function increases the quantity of light stored on
the CCD, and accordingly the image becomes brighter. The magnification is unchanged for
selection of FIX, and the magnification is changeable in accordance with the illuminance of a
subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from
the following.
OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16...")
30 5. Electronic sensitivity enhancement setting [SENS UP] Use of the electronic sensitivity enhancement function increases the quantity of light stored on the CCD, and accordingly the image becomes brighter. The magnification is unchanged for selection of FIX, and the magnification is changeable in accordance with the illuminance of a subject for selection of AUTO. The magnification of the electronic sensitivity is selectable from the following. OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16...