Panasonic Color CCTV Camera Wv Cl930 WV CL934 Series Operating Instructions

11
Installations/Connections
zRotate the lens (option) clockwise slowly to mount the lens.
Important:
• For use of C-mount lens, use the C-mount adaptor (accessory).
Optional dedicated lens
C-mount adaptor (accessory)
* Required for use of C-mount lensC mount: 4.5 mm {5/32} or less
CS mount: 4.5 mm  {5/32} or less
ø20 mm {ø3/4} or less
Lens type Model No.
1/2-inch type {1/2} variable
focal lens
1/2-inch type {1/2} zoom lenses2 x varifocal
6 x Motorized
10 x MotorizedWV-LZ80/2
WV-LZ81/6A
WV-LZ81/10...

12
xConnect the ALC connector (accessory) of the lens to the ALC lens connector of
the camera.
If an auto iris lens with a different shaped connector is used, replace the connector with the
ALC connector (accessory).
ALC lens connector
ALC connector 
Approx. 8 mmLens cable
Lens cableCut hereALC connector
Approx. 6 mm
Pin 2 Pin 1Pin 3Rib
Pin 4
qCut off the lens cable from the connector.
wStrip the end 8 mm {5/16} of the lens cable
outside cover, and then, remove each cover
of the core wires by 2 mm...

13
ALC connectorLens cable Cover
Screw 
(locally procured) Screws 
(locally procured)Camera mounting 
base (option)
rPut the cover on the ALC connector so
that the lens cable is secured to the rib.
cSecure the camera mounting base
(option) to an installation position,
and mount the camera on the base.
• The mounting method of the camera
mounting base varies depending on the
material of the installation position.
Do not use wood screws or nails to
secure the camera mounting base.
• Steel products:
Secured...

14
vEstablish the connection of a coaxial cable (locally procured).
Important:
• Be sure to turn off the power of each device before connection.
Connect a coaxial cable (locally procured) to the video output connector. If the synchroniz-
ing signal input is provided from an external device, connect another coaxial cable to the
external synchronization input connector.
Important:
• Be sure to secure the coaxial cable connectors.
Tripod socket hole: 
1/4-20 UNCScrews
Tripod socket
GEN-LOCK VIDEO OUT
POWER...

15
bUse a cable tie (locally procured) to attach the coaxial cable to the camera
mounting base.
Important:
• The cable tie shall be made of metallic or durable material to be strong enough because
the tie plays the role of camera drop prevention measures in case.
nConnect the power cord and turn on the power.
WV-CL930
Connect between the power connector on the rear side of the camera and a plug socket
with the supplied power cord.
 
Camera mounting base 
(option) Camera mounting 
base (option)
The cable...

16
WV-CL934
Select either 24 V AC or 12 V DC for
power supply and connect the power
supply to the AC/DC power terminal.
+
12 V DC       or        24 V AC
–
AC 24V IN
DC 12V IN
GEN-LOCK VIDEO OUT
POWER
ALARM 2-N 1-L
DAY/
NIGHT
GND
GND
IN OUT

mAdjust the camera angle by loosening the screw of the camera mounting base
while viewing the video monitor.
Be sure to loosen the screw of the camera mounting base when the camera angle is
adjusted. If the camera angle is changed when the screw is tight, excessive...

17
Notes:
• The adjustment procedure for general varifocal lenses is described as follows: For further
information, refer to the operating instructions for the lens to be used.
1. Display a subject that exists as far as possible (10 m or more recommended) to adjust
the back focus.
2. For 8-, or 10-fold magnification lenses, adjust the back focus after setting the zoom to
the WIDE end and setting the focus to the FAR end.
For 2-, or 3-fold magnification lenses, adjust the back focus after setting the zoom...

18
Setting of external synchronization switch
When an external synchronizing signal input is provided to the external synchronization input
connector on the rear side of the camera for loop through, select Hi-Z. To terminate the con-
nector, select G/L 75 Ω. Select G/L 75 Ω for the normal situation, too.
External terminal
Important:
• Be sure to turn off the power of each device before connection.
Alarm output
Output specification:Open collector output
(max. voltage: 16 V DC)
Off:2 to 4 V DC, internally...

19
Setup Menus
Performing each setting item in the setup menu should be completed in advance to use this
unit. Perform the settings for each item in accordance with the conditions of the camera shoot-
ing area. 
The following is an example of setup procedure when LANGUAGE is set to ENGLISH.
Setup menu list
CAMERA SETUPPerforms the camera operation settings. 
CAMERA ID Specifies the camera title. CAMERA ID creates the
camera title that indicates the camera location and
other information about the camera...

20
SPECIAL SETUP
CHROMA GAIN Adjusts the chroma level.
AP GAIN Adjusts the aperture level.
PEDESTAL Adjusts the pedestal level.
HUE Adjusts the chroma phase (hue) level.
PIX OFF Corrects image defect such as flaws. 
COMMUNICATION Performs the communication setting of the system with
a receiver into which this unit is integrated. 
CAMERA RESET Restores the settings in the setup menu to the default
settings. 
SER.NO. Displays the serial number of this unit. 
LANGUAGE SETUPSelects a language to be used in...