Panasonic Aj Spd850p Operating Instructions Manual

51
Setup menus (continued)
No./Item Description
USER menu 
303
STD/NON-STDThis selects STD or NON-STD in
accordance with the composite input
signal.
0000
AUTO:
Standard/non-standard signals are
automatically identified and
processed.
0001 STD : Standard signals are processed.
(Forced STD)
0002 N-STD : Non-standard signals are processed.
(Forced NON-STD)
Notes:
• Use the non-standard (NON-STD)
setting when video or audio trouble
occurs with signals from laser discs or a
satellite.
• At the NON-STD...

52
Setup menus (continued)
No./Item Description
USER menu 
500
VITC BLANKThis selects whether to output the
VITC signal at the positions selected
by setup menu items No. 501 (VITC
POS-1) and No. 502 (VITC POS-2).
0000 BLANK :
VITC signals are not output.
0001
THRU:
VITC signals are output.
501
VITC POS-1 This sets the position where the VITC
signal is to be inserted.
Note:
The same line as the one used for the
setup menu items No. 502 (VITC POS-2)
and No. 662 (UMID POS) setting cannot
be set. [625i...

53
Setup menus (continued)
No./Item Description
USER menu USER menu 
510
TC OUT REFThis is used to switch the phase of
the time code, which is output from
the TIME CODE OUT connector, for
the external LTC input when the TCG
switch is at the 
“EXT ” position.
0000
V OUT:
Time code is synchronized with output
video signal.
0001 TC_IN : Time code is synchronized with
external time code input.
511
VITC OUT This selects how the VITC which is to
be superimposed onto the output
video signal during playback is...

54
No./Item Description
620
ESR MODEThis selects the operation mode for
edge subcarrier reduction (ESR) in
the playback circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001
AUTO:
The mode is automatically set to ON
or OFF depending on the memory
card recorder operation.
621
CCR MODE This selects the cross color
processing during playback.
0000
OFF:
The cross color is output with no
changes made.
0001 ON : The cross color can be reduced.
Note:
This menu option is not displayed in the
625i system....

55
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu 
No./Item Description
622
SETUP 25
(For AJ-SPD850P)
Sub-screen
For setting 7.5% setup processing to be
performed on input and output signals
in the DVCPRO (25 Mbps) mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
Note:
This setup menu is not displayed in the
625i system.
00...

56
Setup menus (continued)
USER menu 
No./Item Description
660
UMID RECThis selects whether or not to record
the UMID information on the card.
0000 OFF :
UMID information is not recorded on
the card. In addition, EE output
signals are blanked.
0001
ON:
UMID information is recorded on the
card.
Note:
If THRU has been selected as the setup
menu item No. 106 (EE MODE SEL)
setting, UMID information of the EE
output signals will be blanked.
661
UMID GENThis selects the UMID information to be
recorded on the...

57
No./Item Description
727
PB FADEThis selects the processing method
for the audio edit points (IN point,
OUT point) during playback etc.
0000
AUTO:
The processing method accords with
the status established during
recording.
0001 CUT : Forced CUT
0002 FADE : Forced FADE
728
EMBEDDED
AUD This selects whether to superimpose
the audio data onto the SDI output.
0000 OFF :
Data is not superimposed.
0001
ON: Data is superimposed.
734
MONI SEL
INH This selects whether the operation of
the MONITOR SELECT...

58
Setup menus (continued)
No./Item Description
USER menu 
800
ADD LINE 25Sub-screen
00
REC LINE1
This selects the additional line where
the signals are to be recorded.
[625i system]
0000 7L::
0002 9L ::
0015 22L
0016 320L ::
0031 335L
0032
623L
[525i system]
0000 10L ::
0002 12L ::
0012 22L
0013 263L
0014 273L ::
0025 284L
0026
525L
01
REC LINE2 This selects the additional line where
the signals are to be recorded.
Note:
This menu option is not displayed when
additional line mode setting 
“1 ” through...

59
No./Item Description
Setup menus (continued)
No./Item Description
USER menu 
02
REC LINE3
03
REC LINE4This selects the additional line where
the signals are to be recorded.
Note:
This menu option is not displayed when
setting 
“1 ” has been selected as the
additional line mode. [625i system]
0000 7L
::
0015 22L ::
0019
323L
::
0031 335L
0032 623L
[525i system]
0000 10L
::
0012 22L
0013 263L ::
0017276L
::
0025 284L
0026 525L
The underlined items indicates the initial setting. 00
REC LINE1
This...

60
USER menu 
The underlined items indicates the initial setting.
No./Item Description
803
TELETEXT
DET
[525i system]
00
REC LINE1:
12
REC LINE13
[625i system]
00
REC LINE1 :
14
REC LINE15 This selects the lines in which the
teletext signals are to be recorded.
[625i system]
0000
OFF
0001 7&320
0002 8&321
0003 9&322
0004 10&323
0005 11&324
0006 12&325
0007 13&326
0008 14&327
0009 15&328
0010 16&329
0011 17&330
0012 18&331
0013 19&332
0014 20&333
0015 21&334
0016 22
[525i system]
0000
OFF
0001 10&273...