Panasonic Aj Spd850p Operating Instructions Manual

41
Setup menus
The memory card recorder can hold five user files, each of
which has its own specific menu settings, and one of these
files can be selected for use.
Changing the file
(1) Press the MENU button
(2) Press the FF button while holding down theDIAG (or SHIFT) button to switch to the next
user file or press the REW button while holding
down the DIAG (or SHIFT) button to return to
the previous user file
Setting and releasing the lock mode
The lock mode can be set to protect the system file and...

42
Setup menus (continued)
Loading user files
The contents of the USER2, USER3, USER4 or USER5
file can be copied (loaded) into the USER1 file. Also, the
contents of the USER1 file can be copied (saved) into the
USER2, USER3, USER4 or USER5 file.
(1) Press the MENU button
(2) Press the REW or FF button while holdingdown the DIAG (or SHIFT) button and select
USER1 file
(3) Turn the search dial to move the cursor ( ) on the menu screen to No. A00 (LOAD)

USER 1 USER 2
USER 3
USER 4
USER 5Load/save Lock...

43
Setup menus (continued)
SYSTEM menu
No./Item Description
11
SYS SC COAR.Coarse adjustment of system phase: 90 °units
Note:
If setting operation is
performed, the setting
value does not return to
factory (default) setting.
00000
0001 90
0002 180
0003 270
12
SYS SC FINE Fine adjustment of system phase:
Variable range ±45 
°or more
– : Advanced, +: Delayed
Note:
If setting operation is
performed, the setting
value does not return to
factory (default) setting.
0000
–128
::
0128
0
::
0255 127
13
SYS H...

44
USER menu 
No./Item Description
000
P-ROLL TIMEThis sets the preroll time.
The preroll time can be set from 0 to 15
seconds in 1-second increments.
0000 0s
::
0005
5s
::
0015 15s
001
LOCAL ENA This selects the buttons which can be
operated on the front panel when the
REMOTE button is lit.
0000 DIS :
No buttons can be operated.
0001
STOP:
Only the STOP button can be operated.
0002 ENA : All buttons can be operated.
002
CTL DISP This selects the 12 or 24 hour display
for the CTL counter.
0000
±12h: 
12...

45
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
008
DISPLAY SELThis selects what information is to be
provided by the time code and other
superimposed displays output from
the VIDEO OUT 3/SDI OUT 3
connector (optional).
0000 TIME :
Data only.
(The data indicates the value for
whichever of CTL, TC or UB currently
selected by the COUNTER button.)
0001
T&STA:
Data and operation status.
0002 T&S&M : Data, operation status and mode.
0003 T&RT :...

46
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item DescriptionNo./Item Description
012
SYS FORMATThis sets the memory card recorder
’s
recording and playback format.
0000
50M:
DVCPRO50 (50 Mbps) is selected.
0001 25M : DVCPRO (25 Mbps) is selected.
0002 DV : DV (25 Mbps) is selected.
Note:
The format complies with the setting of
this menu item when the card is ejected.
017
CHARA SIZE This selects the size of the characters
for the superimposed display...

47
Setup menus (continued)
USER menu 
No./Item Description
05
TIME ZONESets the time difference from the
world standard time.
Refer to the table below, and select the
setting which corresponds to the local
time.0000
00:00
0001 +00:30
0002 +01:00
::
0050 –00:30
No./Item Description
070
TV SYSTEM This selects the TV system.
0000:
The 525 interlace/59.94 Hz system is
selected.
0001:  The 625 interlace/50 Hz system is
selected.
Notes:
• After this setting is changed, turn off
and back on the power again to...

48
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
100
SEARCH ENAThis selects the direct search dial
operation.
0000
DIAL:
For direct search dial operations.
0001 KEY : Operation is not transferred to the
search mode unless the search button
is pressed.
101
SHTL MAX This sets the maximum speed for
shuttle operations.
0000 x8 :
8x normal speed
0001 x16 : 16x normal speed
0002
x32: 32x normal speed
0003 x60 : 60x normal speed
0004 x100 : 100x normal speed...

49
Setup menus (continued)
No./Item Description
USER menu 
113
A IN SEL INHThis selects whether audio input
switching using the INPUT SELECT
button is to be enabled or disabled.
0000 OFF :
Audio input switching using the INPUT
SELECT button is enabled.
0001 ON : Audio input switching using the INPUT
SELECT button is disabled.
0002
REC:
Audio input switching using the INPUT
SELECT button after the memory card
recorder has been transferred to a
recording mode is disabled.
Note:
Even when the ON or REC...

50
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
USER menu 
201
9P SELThis selects whether the REMOTE
(9P) connector functions when the
REMOTE button is lit.
0000 OFF :
Connector does not function.
0001
ON: Connector functions.
204
RS232C SEL This selects whether the RS-232C
connector functions when the
REMOTE button is lit.
0000
OFF: 
Connector does not function.
0001 ON : Connector functions.
205
BAUD RATE These settings are for selecting the
RS-232C...