Panasonic Aj Spd850p Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Spd850p Operating Instructions Manual. The Panasonic manuals for Computer Equipment are available online for free. You can easily download all the documents as PDF.
Page 11
11 Control reference guide (continued) HEADPHONES PULLPULL AUDIO MIX1&2CH1/3 CH2/4REC CH1/3 REC CH2/43&4 CH1/3 CH2/4 AUDIO MON SEL AUDIO VOL SEL LR MIX REC PBUNITYVAR METER FULL/FINE INPUT SELECT VIDEO AUDIO CH 1CH 2CH 3CH 4 COUNTERMENUTC PRESETSELECT SLOT RESET THUMBNAILMARKERBARMENU SET SEARCH REC PLAY FF REW STOP PREVNEXTSHIFT SHTLPUSHJOG SLOW Memory Card Recorder AJ- ENC CONTROLREMOTE LOCALVIDEO LEVELPRESET MANUALCHROMA LEVELPRESET MANUALSET UPPRESETBLKMANUAL HUEPRESETCHROMA PHMANUAL TCREGEN PRESET...
Page 12
12 Control reference guide (continued) HEADPHONES PULLPULL AUDIO MIX1&2CH1/3 CH2/4REC CH1/3 REC CH2/43&4 CH1/3 CH2/4 AUDIO MON SEL AUDIO VOL SEL LR MIX REC PBUNITYVAR METER FULL/FINE INPUT SELECT VIDEO AUDIO CH 1CH 2CH 3CH 4 COUNTERMENUTC PRESETSELECT SLOT RESET THUMBNAILMARKERBARMENU SET SEARCH REC PLAY FF REW STOP PREVNEXTSHIFT SHTLPUSHJOG SLOW Memory Card Recorder AJ- ENC CONTROLREMOTE LOCALVIDEO LEVELPRESET MANUALCHROMA LEVELPRESET MANUALSET UPPRESETBLKMANUAL HUEPRESETCHROMA PHMANUAL TCREGEN PRESET...
Page 13
13 Control reference guide (continued) HEADPHONES PULLPULL AUDIO MIX1&2CH1/3 CH2/4REC CH1/3 REC CH2/43&4 CH1/3 CH2/4 AUDIO MON SEL AUDIO VOL SEL LR MIX REC PBUNITYVAR METER FULL/FINE INPUT SELECT VIDEO AUDIO CH 1CH 2CH 3CH 4 COUNTERMENUTC PRESETSELECT SLOT RESET THUMBNAILMARKERBARMENU SET SEARCH REC PLAY FF REW STOP PREVNEXTSHIFT SHTLPUSHJOG SLOW Memory Card Recorder AJ- ENC CONTROLREMOTE LOCALVIDEO LEVELPRESET MANUALCHROMA LEVELPRESET MANUALSET UPPRESETBLKMANUAL HUEPRESETCHROMA PHMANUAL TCREGEN PRESET...
Page 14
![Page 14
14
Control reference guide (continued)
When the AUDIO MIX switch is at the [3&4]
setting, the setting is switched by one step in the
sequence of A →
B →
C each time the REC CH2/4
button is pressed.
( ON; OFF) CH1/3 CH2/4
A The CH4 signals are recorded on CH4.
B The CH3+CH4 signals are recorded on CH4.
C The CH3 signals are recorded on
CH4.
AUDIO MONITOR SELECT (L/R)
Switch the audio signal to be output to the MONITOR
L/R connectors.
Each time you press the L button, the signals output to
the MONITOR L...](http://img.usermanuals.tech/thumb/58/67804/w300_aj-spd850p_en_om_d-13.png "Page 14
14
Control reference guide (continued)
When the AUDIO MIX switch is at the [3&4]
setting, the setting is switched by one step in the
sequence of A →
B →
C each time the REC CH2/4
button is pressed.
( ON; OFF) CH1/3 CH2/4
A The CH4 signals are recorded on CH4.
B The CH3+CH4 signals are recorded on CH4.
C The CH3 signals are recorded on
CH4.
AUDIO MONITOR SELECT (L/R)
Switch the audio signal to be output to the MONITOR
L/R connectors.
Each time you press the L button, the signals output to
the MONITOR L...")
14 Control reference guide (continued) When the AUDIO MIX switch is at the [3&4] setting, the setting is switched by one step in the sequence of A → B → C each time the REC CH2/4 button is pressed. ( ON; OFF) CH1/3 CH2/4 A The CH4 signals are recorded on CH4. B The CH3+CH4 signals are recorded on CH4. C The CH3 signals are recorded on CH4. AUDIO MONITOR SELECT (L/R) Switch the audio signal to be output to the MONITOR L/R connectors. Each time you press the L button, the signals output to the MONITOR L...
Page 15
15 Control reference guide (continued) Display TV system displays The selected TV system is displayed here. Switch between 525 interlace and 625 interlace in setup menu No. 070 (TV SYSTEM) (See page 47). : lights when 525 interlace TV system is selected. : lights when 625 interlace TV system is selected. WIDE lamp Lights when recording the 16:9 wide-screen information. You can select the recording of the wide-screen information using setup menu No. 645 (WIDE SELECT). During playback, the lamp lights...
Page 16
16 Control reference guide (continued) AC IN SIGNALGND AES/EBUCH1 •2 IN CH3 •4 IN CH1 •2 OUT CH3 •4 OUT SDIIN OUT 1 2 3(SUPER) ACTIVE THROUGH ANALOGANALOGREMOTO Y VIDEO IN P B PR Y P B P R ON OFF 75 Ω REF VIDEO IN ON OFF 75 Ω 1 2 3 (SUPER) REMOTO IN ENCODER REMOTE RS-232CCH1 CH3 CH1 CH3 CH2 AUDIO IN CH4 CH2 CH4 AUDIOOUT DVCPRO/ DV(OPTION) 100BASE-TX TCIN TC OUT MON L MONR SERVICE ONLY Rear Panel (1/2) AC IN socket Connect one end of the power cord supplied to this socket and the other end to the power...
Page 17
17 Control reference guide (continued) Fan Cool the memory card recorder. If the fan stops, “E-10 ” appears on the counter display. SIGNAL GND terminal Connect to the signal ground terminal on the component connected to the memory card recorder to minimize noise. It is not a safety ground. ANALOG COMPONENT VIDEO OUT connectors Output analog component video signals. ANALOG COMPOSITE VIDEO OUT connectors Output analog composite video signals. Video signals containing superimposed information can be output...
Page 18
18 Recording and playing Note: Before using the unit for the first time, be absolutely sure to set the internal clock using setup menu item No.069 (CLOCK SET). (1) Turn the POWER switch of the memory card recorder on (2) Press a card in a P2 card slot until the EJECT button pops out (3) Push the EJECT button that has popped out over to the right •When the P2 card is inserted into the memory card recorder, its status is indicated by the corresponding P2 card access LED. For details on these statuses,...
Page 19
![Page 19
19
Recording and playing (continued)
Switch the write-protect switch of the P2 card to
[PROTECT].
Protecting against a possible erasureP2 card access LEDs and P2 card status
PROTECT
Write-protect switchP2 card status
P2 card
access LED
Recording and play are possible.
Green lighting
The memory card recorder is accessing
to record or play.
Orange flashing Recording and play are possible.
The card is selected for recording.
Orange lighting
The memory card recorder is reading
card information.
Quick...](http://img.usermanuals.tech/thumb/58/67804/w300_aj-spd850p_en_om_d-18.png "Page 19
19
Recording and playing (continued)
Switch the write-protect switch of the P2 card to
[PROTECT].
Protecting against a possible erasureP2 card access LEDs and P2 card status
PROTECT
Write-protect switchP2 card status
P2 card
access LED
Recording and play are possible.
Green lighting
The memory card recorder is accessing
to record or play.
Orange flashing Recording and play are possible.
The card is selected for recording.
Orange lighting
The memory card recorder is reading
card information.
Quick...")
19 Recording and playing (continued) Switch the write-protect switch of the P2 card to [PROTECT]. Protecting against a possible erasureP2 card access LEDs and P2 card status PROTECT Write-protect switchP2 card status P2 card access LED Recording and play are possible. Green lighting The memory card recorder is accessing to record or play. Orange flashing Recording and play are possible. The card is selected for recording. Orange lighting The memory card recorder is reading card information. Quick...
Page 20
![Page 20
20
Connections
Example of the memory card recorder and DVCPRO VTR
Source machine:Set the CONTROL switch on the front panel to [REMOTE] (the memory card \
recorder : AJ-SPD850).
Recorder: Set the CONTROL switch on the front panel to [LOCAL] (VTR : AJ-SD955 or\
others).
Notes: •Video and audio output may be disturbed when the reference video signal \
is not input, so it is recommended that a
system which inputs the reference video signal be used.
• This unit does not come with color framing settings....](http://img.usermanuals.tech/thumb/58/67804/w300_aj-spd850p_en_om_d-19.png "Page 20
20
Connections
Example of the memory card recorder and DVCPRO VTR
Source machine:Set the CONTROL switch on the front panel to [REMOTE] (the memory card \
recorder : AJ-SPD850).
Recorder: Set the CONTROL switch on the front panel to [LOCAL] (VTR : AJ-SD955 or\
others).
Notes: •Video and audio output may be disturbed when the reference video signal \
is not input, so it is recommended that a
system which inputs the reference video signal be used.
• This unit does not come with color framing settings....")
20 Connections Example of the memory card recorder and DVCPRO VTR Source machine:Set the CONTROL switch on the front panel to [REMOTE] (the memory card \ recorder : AJ-SPD850). Recorder: Set the CONTROL switch on the front panel to [LOCAL] (VTR : AJ-SD955 or\ others). Notes: •Video and audio output may be disturbed when the reference video signal \ is not input, so it is recommended that a system which inputs the reference video signal be used. • This unit does not come with color framing settings....