Panasonic Aj Spd850p Operating Instructions Manual

							
Operating Instructions

Memory Card Recorder
AJ-P
Model No. AJ-E

Before operating this product, please read the instructions carefully an\
d save this manual for future use.
ENGLISH

S0704N7125 -M 
Printed in JapanD
VQT0L05-4 
						

							
For AJ-SPD850P
2IMPORTANT
“Unauthorized recording of copyrighted television programmes, video t\
apes and other materials may
infringe the rights of copyright holders and contravene copyright laws.”\

THIS EQUIPMENT MUST BE GROUNDED
To ensure safe operation, the three-pin plug must be
inserted only into a standard three-pin power outlet which
is effectively grounded through normal household wiring.
Extension cords used with the equipment must have
three cores and be correctly wired to provide connection
to the ground. Wrongly wired extension cords are a
major cause of fatalities.
The fact that the equipment operates satisfactorily does
not imply that the power outlet is grounded or that the
installation is completely safe. For your safety, if you are
in any doubt about the effective grounding of the power
outlet, please consult a qualified electrician.
indicates safety information. 
						

							
For AJ-SPD850P
3
indicates safety information.
CAUTION:
THE AC RECEPTACLE (MAINS SOCKET OUTLET)
SHALL BE INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
TO COMPLETELY DISCONNECT THIS
EQUIPMENT FROM THE AC MAINS,
DISCONNECT THE POWER CORD PLUG FROM
THE AC RECEPTACLE.
WARNING:
• TO REDUCE THE RISK OF FIRE OR SHOCKHAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE. 
• TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM
ALL LIQUIDS. USE AND STORE ONLY IN
LOCATIONS WHICH ARE NOT EXPOSED TO
THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent
risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF THE OPTIONAL
INTERFACE BOARDS TO QUALIFIED SERVICE
PERSONNEL.
Notice (U.S.A. only):
This product has a fluorescent lamp that contains
a small amount of mercury. It also contains lead
in some components. Disposal of these materials
may be regulated in your community due to
environmental considerations. For disposal or
recycling information please contact your local
authorities, or the Electronics Industries Alliance:

CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER CHANGES OF SWITCH
SETTINGS INSIDE THE UNIT TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
• Keep the temperature inside the rack to between41°F to 104°F (5°C to 40°C).
• Bolt the rack securely to the floor so that it will not topple over when the deck is drawn out.
CAUTION:
This apparatus can be operated at a voltage in the
range of 100 – 240 V AC.
Voltages other than 120 V are not intended for U.S.A.
and Canada.
CAUTION:
Operation at a voltage other than 120 V AC may
require the use of a different AC plug. Please contact
either a local or foreign Panasonic authorized service
center for assistance in selecting an alternate AC
plug.
FCC Note:
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.  This equipment generates,
uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications.  Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Warning: To assure continued FCC emission limit
compliance, the user must use only shielded interface
cables when connecting to external units.  Also, any
unauthorized changes or modifications to this equipment
could void the user’s authority to operate it. 
						

							
For AJ-SPD850E
4

FOR U.K. ONLY
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark  or the BSI mark  on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable.  One is for con\
tinental Europe, etc. and the other one is only
for U.K.
Appropriate mains cable must be used in each local area, since the other\
 type of mains cable is not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K. FOR U.K. ONLY
Caution for AC Mains Lead

How to replace the fuse
1. Open the fuse compartment with a screwdriver.
2. Replace the fuse.
Fuse

indicates safety information. 
						

							
5
For AJ-SPD850E
indicates safety information.
Disposal of old equipment
Batteries, packaging and old equipment should not
be disposed of as domestic waste, but in
accordance with the applicable regulations.
Attentie
Voor de primaire voeding en het reservegeheugen van
het apparaat. alsmede voor de afstandsbediening,
wordt gebruik gemaakt van een batterij.
Wanneer de batterij uitgeput is, mag u deze nlet
gewoon weggooien, maar dient u ze als klein
chemisch afval weg te doen.

THIS EQUIPMENT MUST BE EARTHED
To ensure safe operation, the three-pin plug must be
inserted only into a standard three-pin power point which
is effectively earthed through normal household wiring.
Extension cords used with the equipment must have
three cores and be correctly wired to provide connection
to the earth. Wrongly wired extension cords are a major
cause of fatalities.
The fact that the equipment operates satisfactorily does
not imply that the power point is earthed or that the
installation is completely safe. For your safety, if you are
in any doubt about the effective earthing of the power
point, please consult a qualified electrician.
DO NOT REMOVE PANEL COVERS BY
UNSCREWING THEM.
To reduce the risk of electric shock, do not remove
the covers. No user serviceable parts inside.Refer servicing to qualified service personnel.
WARNING:
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY FROM
ALL LIQUIDS. USE AND STORE ONLY IN
LOCATIONS WHICH ARE NOT EXPOSED TO
THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF THE OPTIONAL
INTERFACE BOARDS TO AUTHORIZED SERVICE
PERSONNEL.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER CHANGES OF SWITCH
SETTINGS INSIDE THE UNIT TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent
risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
•Keep the temperature inside the rack to between
5°C to 40 °C.
• Bolt the rack securely to the floor so that it will
not topple over when the deck is drawn out.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
IMPORTANT
“Unauthorized recording of copyrighted television programmes, video tapes\
 and other materials may
infringe the rights of copyright holders and contravene copyright laws. ”
Operating precaution
Operation near any appliance which generates strong magnetic fields may \
give rise to noise in the
video and audio signals. If this should be the case, deal with the situa\
tion by, for instance, moving the source
of the magnetic fields away from the unit before operation.
CAUTION:
THE AC RECEPTACLE (MAINS SOCKET OUTLET)
SHALL BE INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
TO COMPLETELY DISCONNECT THIS
EQUIPMENT FROM THE AC MAINS,
DISCONNECT THE POWER CORD PLUG FROM
THE AC RECEPTACLE. 
						

							
Contents
6
Introduction ......................................................7
Included accessories  ......................................7
Options .............................................................7
Features ...........................................................8
Control reference guide .................................10
•Front Panel ......................................................10
• Display .............................................................15
• Rear Panel .......................................................16
Recording and playing ...................................18
•Inserting P2 cards ............................................18
• Removing P2 cards..........................................18
• Protecting against a possible erasure ..............19
• P2 card access LEDs and P2 card status........19
Connections .................................................. 20
Jog/Shuttle (Search dial) .............................. 21
Working with clip thumbnails ....................... 22
Play List .......................................................... 34
•Using the play list .............................................34
List of shortcuts .............................................39
Setup (Initial settings) ....................................40
Setup menus ...................................................41
•SYSTEM menu ................................................43
• USER menus ...................................................44
 .....................................................44
...........................................48
 ...........................................50
........................................................51
 ............................................52
.....................................................53
 ....................................................56
.................................................58
 .....................................................62
Time code, user bit and CTL .........................63
Superimpose screen ......................................64
Video output signals and servo reference 
signal ...............................................................65
Audio V fade function ....................................66
Audio recording channel and monitor 
output selection..............................................67
Printed circuit board ......................................67 Rack mounting ...............................................68
Condensation .................................................69
Maintenance....................................................69
Error messages ..............................................70
RS-232C interface...........................................74
Connector signals ..........................................77
Specifications .................................................78
Information on software for this product
1. Included with this product is software licensed under the GNU General Public License (GPL) and GNU
Lesser General Public License (LGPL), and users are
hereby informed that they have the right to obtain,
change and redistribute the source codes of this
software.
Details on GPL and LGPL can be found on the
installation CD provided with the unit.  Refer to the
folder called  “LDOC ”.
(Details are given in the original (English-language)
text.)
To obtain the source codes, go to the following home
page:http://panasonic.biz/sav/
The manufacturer asks users to refrain from directing
inquiries concerning the source codes they have
obtained and other details to its representatives.
2. Included with this product is software which is licensed under ICU-License.
Details on ICU-License can be found on the
installation CD provided with the unit.  Refer to the
folder called  “LDOC ”.
(Details are given in the original (English-language)
text.)
3. Included with this product is software which is licensed under Apache-License.
Details on Apache-License can be found on the
installation CD provided with the unit.  Refer to the
folder called  “LDOC ”.
(Details are given in the original (English-language)
text.) 
						

							
7
Introduction
3-pin power cord x 1CD-ROM x 1
Included accessories
SDI interface boardAJ-YA755G
IEEE1394 interface board  AJ-YAD850G
Only use the above-listed boards as optional boards. Rack-mounting adapters
AJ-MA75P
DVD drive unit AJ-DVD850G
Options
The AJ-SPD850 is a memory card recorder that has five
slots for cards (such as the AJ-P2C002SG which is sold
separately) that conform to the PC card type II standard. It
can record and play video and audio in the DVCPRO50,
DVCPRO, and DV compression formats. 
It has a 3.5-inch color LCD for simple setting and
confirmation of video. It also allows searches and play of
video and audio with the thumbnail screen.  You can also select and play parts of the video and audio
recorded on cards in the memory card recorder, in an order
you can specify.
You can also use it just like a regular player for use with a
VTR.  
						

							
Multifunctional interface
•Analog video input/output
Both composite and component signal inputs/outputs
are provided.
• AES/EBU audio input/output
Digital audio input and output connectors are provided.
• Serial digital input/output
Fit the optional SDI interface board (optional: AJ-
YA755G) to enable interfacing of the serial digital
component signals.
• IEEE1394 digital input/output
Fit the optional IEEE1394 interface board (optional:AJ-
YAD850G) to enable input/output interfacing of
IEEE1394 digital signals.
• RS232C remote
A RS232C remote connector is provided.
• USB 2.0
By connecting a personal computer with USB 2.0, you
can use the P2 cards in the memory card recorder as
mass storage. You will need to install the USB driver
onto your computer.
• LAN
You can connect to a network with a 100BASE-TX
/10BASE-T.
4-channel, high-sound-quality digital audio
The 4-channel PCM audio enables independent
recording for all four channels in addition to channel
mixing. 
Menu-based setup
Perform setup while viewing the setup menus on the
memory card recorder ’s display (vacuum fluorescent
display), the 3.5-inch LCD, or a TV monitor connected
through an OUT 3 connector.
Rack  mounting
Use the optional rack adapter (AJ-MA75P) to attach this
4U-sized deck to a 19-inch rack.
Features
8
Recording and play of files on memory cards
The memory card recorder can record to and play video
and audio on memory cards (such as the AJ-P2C002SG
which is sold separately; henceforth referred to as  “P2
cards ”) in the DVCPRO50, DVCPRO, and DV
compression formats. Video and audio data is recorded
on the cards in the form of MXF file (SMPTE390M) and
clip meta data in XML.
5 PC card slots
The unit comes with five PC card slots into which you can
insert PC card type II cards.  You can record and play
audio and video material on the P2 cards you have
inserted into these slots.
Video monitor
The 3.5-inch color LCD monitor allows to find and play
video, using such features as the thumbnail screen.
Play list feature
Use the IN/OUT and ENTRY buttons on the front panel to
create and play play lists. Just choose the parts you want
recorded on any of the five P2 cards in the memory card
recorder, and put them in the order you want them to
play. You can then record these play lists to an SD
memory card.
Dial jog/Dial shuttle
The jog makes it possible to play in slow motion at rates
between  –1.0 and +1.0. The shuttle allows high speed
play in either direction at up to 100 times normal speed.
At speeds up to 10 x, the sound is also audible.
Time codes/player function for editing
The memory card recorder has a built-in time code
generator (TCG) and time code reader (TCR). 
In addition to the internal time code, external time code
input or input signal VITC can be recorded on the
memory card recorder as the time code. The memory
card recorder can also be used as a player for an editing
system with RS-422A.
Video encoder control
The encoder controls on the front panel allow you to
adjust the video output level, chroma, setup, and hue
(chroma phase).
Switching between 525i and 625i TV systems
Select the TV system (525i or 625i in setup menu No.
070) to match the video input signal to play and record
the different TV system signals. 
						

							
Recording times(1 Card)
(For details, see the operating instructions for the memory
card.) •Dividing clips over 4 GB in length
If the one-time continuous recording exceeds the
duration given in the table below when a P2 card with a
memory capacity of 8 GB or more is used in this unit,
the recording will automatically be continued as a
separate clip.  When performing thumbnail operations
(display, delete, repair or copy) for clips using a P2
series product, the operations can be performed for the
entire recording as a single clip.
With nonlinear editing software or a personal computer,
the recording may be displayed as separate clips.
For the latest information on P2 cards and SD
memory cards:
For the latest information not available in the Operating
Instructions, visit the P2 Support Desk at the following
Web sites. 
For Japanese: http://panasonic.biz/sav/
For English: https://eww.pavc.panasonic.co.jp/pro-av/
9
Card model
AJ-P2C002SG
AJ-P2C004HG
AJ-P2C008HG
DVCPRO
(2-channel audio)
approx. 8 minutes
approx. 16 minutes
approx. 32 minutes
DVCPRO50
(4-channel audio)
approx. 4 minutes
approx. 8 minutes
approx. 16 minutes
Recording format
Features (continued)
Recording format
DVCPRO50
DVCPRO/DV
Recording duration
approx. 10 minutes
approx. 20 minutes 
						

							
10
Control reference guide

HEADPHONESPULLPULLAUDIO MIX1&2CH1/3 CH2/4REC CH1/3
REC CH2/43&4CH1/3 CH2/4AUDIO MON SEL
AUDIO VOL SEL LR
MIXREC
PBUNITYVAR
METER
FULL/FINE INPUT SELECT
VIDEO AUDIOCH 1CH 2CH 3CH 4
COUNTERMENUTC PRESETSELECT SLOT
RESETTHUMBNAILMARKERBARMENUSET SEARCH
REC
PLAY
FF
REW STOP
PREVNEXTSHIFT
SHTLPUSHJOGSLOW
Memory Card Recorder AJ-ENC
CONTROLREMOTE
LOCALVIDEO
LEVELPRESET
MANUALCHROMA LEVELPRESET
MANUALSET UPPRESETBLKMANUALHUEPRESETCHROMA PHMANUALTCREGEN
PRESET REC RUN
FREE RUNDIAG
ON
POWER
USB 2.0OFFREMOTELANUSB1
2
3
4
5
SUPERON
OFFTCGINT
EXTMODEPB EEREC INHON
OFF
DVCPRO 50
DVCPRODV
PLAY LIST EVENTINSERTDELETEGO TO
ENTRY OUT
IN

Front panel
—  Upper section

ONPOWER
USB 2.0
OFFREMOTELANUSB
1
2
3
4
5
SUPERON
OFFTCGINT
EXTMODEPB EEREC INHON
OFF
DVCPRO 50
DVCPRO
DV
POWER switch
Use when switching between ON and OFF of the power.
USB 2.0 connector (Type B) 
Use when connecting a personal computer (See page 20).
REMOTE button and REMOTE display
Use when operating the memory card recorder under
external control or copying files on P2 cards through the
9-pin REMOTE, RS-232C, LAN, or USB 2.0 terminal. 
When the REMOTE button is pressed, the REMOTE
display changes as follows: [Lights out] 
→[REMOTE
lights] →[Lights out]. When it is pressed while holding
down the SHIFT button, the displays change as follows:
[Lights out/REMOTE lights] 
→[LAN lights] →[USB
lights] →[Lights out]. (These operations are not
performed while thumbnails or play lists are displayed.) REMOTE button lights: You can operate the memory card recorder underexternal control set at setup menu No. 201 (9P SEL)
or No. 204 (RS232C SEL).
→
LAN lights: You can check files on P2 cards with a personal
computer on the network through 100BASE-TX
/10BASE-T connection. At this time, front panel
controls of the memory card recorder are disabled.
USB lights: By connecting a personal computer with USB2.0, you
can use the P2 cards in the memory card recorder as
mass storage. At this time, front panel controls of the
memory card recorder are disabled. You will need to
install the USB driver onto your computer.
Format display area
Shows the recording format and the format of the files
recorded on the P2 card.DVCPRO50 : This indicates recording and playback of
DVCPRO50 (50 Mbps) format.
DVCPRO : This indicates recording and playback of
DVCPRO (25 Mbps) format.
DV : This indicates recording and playback of
DV format.
SUPER switch
ON :The time code and other superimposed information
are output to the VIDEO OUT 3 connector, and when
the SDI OUT 3 connector (optional) is provided, they
are output to this connector as well.OFF: The superimposed information is not output.
REC INH switch 
This switch is used to enable or disable recording to P2
cards.
ON : Recording is disabled (inhibited).
The REC INH lamp lights on the display panel.
OFF: Recording is enabled so long as the write-protect
switch mechanism on the card is set to enable
recording.
TCG switch
INT : The internal time code generator is used.
EXT : The external time code which is input from the
time code input connector or video signal VITC is
used. Select at setup menu No. 505 (EXT TC
SEL).
MODE switch
This switch is used to select the signals in the stop
mode. PB : The signal from the card is output.
EE : The input signal selected by the INPUT SELECT
button is output.
SD memory card slot
Insert an SD memory card.
Insert : With the label facing up and the cut-corner
facing in, press until the card locks in place.
Eject : After checking that the lamp has gone off, press
the card in to release the lock.
Note: Insert only SD memory cards: do not insert any other
type of cards.
P2 card slots
Press the card in until the eject button pops out. After
inserting the card, push the button over (See page 18).
P2 card access LEDs
See page 19.
EJECT buttons
Press to eject the card. Raise the button and press
firmly. 
Do not use this button while the card ’s access indicator
is on (See page 18).