Palmone Tungsten E Handheld Instructions

211
CHAPTER 14
Using World Clock
World Clock enables you to view the current time and date in multiple 
locations and to set an alarm. 
To open World Clock:
1.Tap the Home icon  . 
2.Tap the World Clock icon  .
TIPYou can also open World Clock by tapping the Clock icon   in the 
upper-left corner of the active input area, and then tapping Go to Clock, or, 
when your handheld is off, you can press Select on the navigator
, and then tap 
Go to Clock. 

Chapter 14 Using World Clock
212
Viewing the time
There are several ways for you to easily check the current time and date.
To view the time:
Do one of the following:
nWhen your handheld is on, tap the Clock icon   in the upper-left corner of the 
input area.
Your handheld displays the time for two seconds and then returns to the 
previous application.
nWhen your handheld is off, press Select on the navigator. 
Your handheld turns on, displays the time, and then turns off after a few 
seconds.
nTap the...

Setting the primary location
213
To set the date:
1.Tap Set Date & Time.
2.Tap the Set Date box.
3.Tap the arrows to select the current year.
4.Tap the current month.
5.Tap the current date, or tap Today.
6.Ta p  D o n e .
To set the time:
1.Tap Set Date & Time.
2.Tap the Set Time box.
3.Tap the up or down arrows to change the hour.
4.Tap each number of the minute, and then tap the arrows to change the minutes.
5.Tap OK, and then tap Done.
Tap to set date
Ta p  
arrows 
to 
select 
year
Tap to 
select...

Chapter 14 Using World Clock
214
Choosing a different primary location
If you travel to another location and you want alerts to appear based on local time, 
you need to change the primary location to update the system time. 
To change the primary location:
1.Tap the primary location pick list.
2.Tap the location you want to use as the new primary location. 
If the new location is in another time zone, World Clock automatically updates the 
date and time in all the applications on your handheld.
Setting...

Adding a location
215
Adding a location
If an appropriate location does not appear in a location pick list, you can add a new 
location to the list. When you add a location, the default Time Zone and 
Daylight Saving settings are usually correct. However, you can adjust these 
settings if necessary. When the Daylight Saving options are active, the time change 
automatically occurs at 1:00 AM on the selected start and end dates.
To add a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Tap...

Chapter 14 Using World Clock
216
3.Tap the month when daylight saving begins.
4.Tap the Week pick list, and then select the week when daylight saving time 
begins within the selected month.
5.Tap the Day pick list, and then select the day of the week when daylight saving 
time begins within the selected week.
6.Ta p  O K .
7.Tap the End box, and then repeat steps 3 through 8 to select when daylight 
saving ends.
8.Ta p  O K .
Modifying a location
If you add a location and later realize you did not use...

Setting an alarm
217
Setting an alarm
In addition to setting and displaying the date and time, World Clock also provides 
a convenient travel alarm feature. You can set an alarm to sound during the next 
24-hour period.
To set an alarm:
1.Tap the box next to the Alarm   icon to open the Set Alarm dialog box.
2.Tap the time columns to set the hour and minute.
3.Ta p  O K .
4.When the alarm reminder message appears, do one of the following:
– Tap OK to permanently dismiss the reminder and return to the...

Chapter 14 Using World Clock
218
Using World Clock menus
World Clock menu commands that are not explained elsewhere in this book are 
described here.
See“Using menus” in Chapter 4 for information about choosing menu commands.
Options menu
Display OptionsOpens a dialog box where you can choose which information 
appears on the World Clock screen.
Show Multiple Locations: Activates the secondary location 
displays. When this is selected, the secondary locations appear 
below the primary location. 
Date:...

219
CHAPTER 15
Performing HotSync
®
 Operations
HotSync® technology enables you to synchronize data between a Palm OS® 
handheld and Palm™ Desktop software or another personal information manager 
(PIM) such as Microsoft Outlook, as well as to install add-on applications. 
Conducting HotSync operations
The simplest way to synchronize data is to perform a direct HotSync operation by 
attaching your handheld to the cable, turning your handheld on, and tapping the 
Star icon.
Performing a HotSync operation:...

Chapter 15 Performing HotSync® Operations
220
To perform a HotSync operation on a Windows computer:
1.Plug the HotSync cable into the port on the bottom of your handheld.
2.If HotSync Manager is not running, start it: On the Windows desktop, click 
Start, and then select Programs. Navigate to the Palm Desktop software 
program group, and select HotSync Manager. Alternatively, you can start the 
Palm Desktop software, which automatically opens HotSync Manager. 
3.Turn on your handheld.
4.Tap the Star icon...