OKI MC561dn User Manual

251 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
320Please check 
Fuser Unit: 320
Please see Help 
for details
BlinksThe fuser unit is not properly 
installed.
Reinstall it properly.
330Please check Belt 
Unit: 330
Please see Help 
for details
BlinksThe belt unit is not properly 
installed.
Reinstall it properly.
321Power Off and 
wait for a while: 
321
Please see Help 
for details
BlinksMotor Driver IC overheat is 
detected.
Turn the MFP off and wait for 
a while.
310
311
316...

252 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Power Off and 
Wait for a while
%ERRCODE%:C
ondensing Error
BlinksCondensation has formed in 
the MFP.
Turn the MFP off and wait for 
a while.
Power Off/On
%ERRCODE%:D
ownload Error
BlinksAn error occurred. 
Turn the MFP off and then on 
again.
If the error is not resolved, 
call your local service dealer. 
Power Off/On
%ERRCODE%:Er
ror
BlinksA fatal error occurred.
Turn the MFP off and then on 
again.
If the error is not resolved,...

253 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Document jam
Please open the 
scanner unit and 
the top cover
And, please 
check
Please see Help 
for details
BlinksA paper jam occurred in the 
scanner unit.
Open the scanner unit and the 
top cover, and then remove 
the jammed paper.
Lamp Error. 
Please call 
service. 

Please see Help 
for details
BlinksA lamp in the scanner unit is 
at the end of its life. Or, a 
document cannot be read 
normally because the optical 
system is...

254 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Inspection is 
required
%ERRCODE%: 
SIP Error
BlinksProcessing of scanned image 
has failed.
Turn the MFP off and then on 
again.
If the error is not resolved, 
call your local service dealer.
Please call 
service
Scanner unit 
failed to detect 
printer unit
BlinksAn error occurred between 
the scanner and printer units.
Turn the MFP off and then on 
again.
If the error is not resolved, 
call your local service dealer.
SIP Firmware...

255 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Error Messages: Copying
The following messages are displayed on the copy standby screen 
while using the copy function.
CodeMessage 
key Cause/Remedy
Cancelling Copy 
jobLights upA copy job is being cancelled.
Wait for a while.
Copy job 
Cancelled
\356\200\204Clo
se
Lights upA copy job was cancelled.
Off Line ModeLights upThe MFP is off line and cannot 
start a copy job.
Press the  key on 
the control panel and then 
select...

256 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Error Messages: Faxing
The following messages are displayed on the display screen while 
using the fax function.
CodeMessage 
key Cause/Remedy
Received invalid data
Please see Help for 
details
\356\200\204Close
BlinksThe MFP received and 
deleted invalid data.
Memory Overflow RxBlinksThe memory 
overflowed while 
receiving fax data.
If you are doing other 
tasks simultaneously, 
finish them. Or, delete 
any unnecessary...

257 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Error Messages: Scanning
The following messages are displayed on the display screen while 
using the scan function.
Off Line ModeLights upThe MFP is off line and 
cannot print received 
fax data.
Press the  key 
on the control panel 
and then select 
[Online/Offline] on the 
print menu screen.
CodeMessage 
key Cause/Remedy
CancellingLights upA ScanTo job is being 
cancelled.
Cancelling 
transmissionLights upAn email or file...

258 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Writing Failed
Please see Help for 
details
\î\€\204Close
BlinksWriting to the 
connected USB 
memory failed.
Remove the write-
protection of the 
connected USB 
memory.
USB Memory 
Disconnected
Please see Help for 
details
\î\€\204Close
BlinksUSB memory is not 
connected to the MFP 
and the MFP cannot 
store data.
Be sure that the USB 
memory is connected 
to the MFP properly.
Connect to PC 
Failed
Please see Help for 
details...

259 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Check SMTP 
Settings
Please see Help for 
details
\î\€\204Close
BlinksAn error occurred while 
connecting to an SMTP 
server.
• Check the network 
configuration, cable 
connection and sta-
tus, and the server 
status.
• Check the SMTP set-
tings.
Check POP3 
Settings
Please see Help for 
details
\î\€\204Close
BlinksAn error occurred while 
connecting to a POP3 
server.
• Check the network 
configuration, cable 
connection and sta-...

260 – Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Getting Target IP 
Failed
Check DHCP 
Settings
Please see Help for 
details
BlinksThe MFP could not get 
IP address from DHCP 
server.
Check the network 
configuration, cable 
connection and status, 
and the server status.
Check DNS Settings
Please see Help for 
details
\î\€\204Close
BlinksAn error occurred while 
connecting to a DNS 
server, or the MFP 
failed to obtain IP 
address.
• Check the network 
configuration, cable...