Home > Oce > Printer > Oce PlotWave 300 User Manual

Oce PlotWave 300 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Oce PlotWave 300 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Oce manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Use the Océ Windows® Printer Driver to send a print job
    Introduction
    Océ provides the Océ Windows® Printer Driver that allows you to send print jobs to
    your Océ PlotWave 300. This driver is a mixed raster-vector HP-GL/2 printer driver that
    allows you to print from any application under Windows 7, Windows XP®, Windows
    Vista®, Windows Server® 2003, Windows Server® 2008, Windows Terminal Server®,
    Novell 6.x, Citrix Presentation Server 4.x or Citrix XenApp to your Océ printer.
    Illustration
    How to use the Océ Windows® Printer Driver to send a print job
    #
    RemarksActionStep
    AutoCAD® 2000 or any other Windows
    application
    Open the file that you want to
    print in the source application.
    1
    From the 'File' menu of the ap-
    plication, click 'Print'.
    2
    Select the Océ PlotWave 300 in
    the 'Printer' area of the 'Print'
    dialog box.
    3
    Chapter 3 - Quick start
    61
    Use the Océ Windows® Printer Driver to send a print job
    Downloaded From ManualsPrinter.com Manuals 
    						
    							RemarksActionStep
    You can define the default print job settings
    in the Océ Express WebTools.
    Click 'Properties'.4
    In the 'Image' tab click the
    'More' button. Make sure a
    checkmark is placed in the 'Océ
    Ticket enabled' box to overrule
    the default values for the job
    settings.
    5
    Check all tabs in the driver and
    change the default settings if
    necessary.
    6
    Click 'OK' to send the print job
    to the Smart Inbox or the print
    queue.
    7
    Note:
    More information about how to install, configure and use the driver is available in the
    documentation provided with the Océ Windows® Printer Driver.
    ■the Océ Windows® Printer Driver Online Help
    ■the Océ Windows® Printer Driver User manual
    Note:
    The Océ PlotWave 300 is delivered with a driver pack CD-ROM. You can also download
    the latest Océ drivers, free of charge, from our Web site www.oce.com.
    Chapter 3 - Quick start
    62
    Use the Océ Windows® Printer Driver to send a print job
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Use the Océ PostScript® 3 Driver to send a print job
    Introduction
    Océ provides the Océ PostScript® 3 Driver that allows you to send print jobs to your
    Océ PlotWave 300.
    Note:
    You need a license to be able to print PostScript® files on the Océ PlotWave 300.
    Note:
    More information about how to install, configure and use the driver is available in the
    documentation provided with the Océ PostScript® 3 Driver.
    ■the Océ PostScript® 3 Driver Online Help
    ■the Océ PostScript® 3 Driver Installation manual
    Illustration
    How to use the Océ PostScript® 3 Driver to send a print job
    #
    RemarksActionStep
    Open the file that you want to
    print in the source application.
    1
    Chapter 3 - Quick start
    63
    Use the Océ PostScript® 3 Driver to send a print job
    Downloaded From ManualsPrinter.com Manuals 
    						
    							RemarksActionStep
    From the 'File' menu of the ap-
    plication, click 'Print'.
    2
    Select the Océ PlotWave 300 in
    the 'Printer' area of the 'Print'
    dialog box.
    3
    You can define the default print job set-
    tings in the Océ Express WebTools.
    Click 'Properties' and 'Ad-
    vanced'.
    4
    Activate the Océ Job Ticket to
    overrule the default values for
    the job settings.
    5
    Check and change the Printer
    Features settings if necessary.
    6
    Click 'OK' to send the print job
    to the print queue.
    7
    Chapter 3 - Quick start
    64
    Use the Océ PostScript® 3 Driver to send a print job
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Make a 01:01 AM copy of a CAD drawing
    1.Feed the original face up and centered on the original feeding table.
    Note:
    You do not need to center the original precisely. The exact position of the original is au-
    tomatically detected by the scanner.
    The 'Copy' tab is automatically activated on the user panel.
    Chapter 3 - Quick start
    65
    Make a 01:01 AM copy of a CAD drawing
    Downloaded From ManualsPrinter.com Manuals   
    						
    							Note:
    The description of the first default copy template is displayed ('1:1 copy, CAD drawing').
    With a copy template you can pre-define the settings you need for a copy job. You only
    need to set the job settings once and you can store the settings in a job template that is
    presented on the user panel. You can re-use the job template for each next job without
    the need to redefine all the settings every time. (see ‘Define the copy job preferences and
    copy templates’ on page 128).
    2.Press the green button.
    Note:
    Depending on the selected 'Original release mode' in the Océ Express WebTools, the
    scanner holds or releases the original after the scan procedure.
    Chapter 3 - Quick start
    66
    Make a 01:01 AM copy of a CAD drawing
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Make a 01:01 AM copy of a color drawing
    1.Feed the original face up and centered on the original feeding table.
    Note:
    You do not need to center the original precisely. The exact position of the original is au-
    tomatically detected by the scanner.
    The 'Copy' tab is automatically activated on the user panel.
    2.Open the 'Copy' tab with the confirmation button above the scroll wheel.
    3.Use the scroll wheel to select copy template 2 ('1:1 copy, color drawing').
    Chapter 3 - Quick start
    67
    Make a 01:01 AM copy of a color drawing
    Downloaded From ManualsPrinter.com Manuals   
    						
    							Note:
    With a copy template you can pre-define the settings you need for a copy job. You only
    need to set the job settings once and you can store the settings in a job template that is
    presented on the user panel. You can re-use the job template for each next job without
    the need to redefine all the settings every time. (see ‘Define the copy job preferences and
    copy templates’ on page 128).
    4.Press the green button.
    Note:
    Depending on the selected 'Original release mode' in the Océ Express WebTools, the
    scanner holds or releases the original after the scan procedure.
    Chapter 3 - Quick start
    68
    Make a 01:01 AM copy of a color drawing
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Make a half size copy (50%) of a CAD drawing
    1.Feed the original face up and centered on the original feeding table.
    Note:
    You do not need to center the original precisely. The exact position of the original is au-
    tomatically detected by the scanner.
    The 'Copy' tab is automatically activated on the user panel.
    2.Open the 'Copy' tab with the confirmation button above the scroll wheel.
    3.Use the scroll wheel to select copy template 3 ('Reduce copy by 50%').
    Chapter 3 - Quick start
    69
    Make a half size copy (50%) of a CAD drawing
    Downloaded From ManualsPrinter.com Manuals   
    						
    							Note:
    With a copy template you can pre-define the settings you need for a copy job. You only
    need to set the job settings once and you can store the settings in a job template that is
    presented on the user panel. You can re-use the job template for each next job without
    the need to redefine all the settings every time. (see ‘Define the copy job preferences and
    copy templates’ on page 128).
    4.Press the green button.
    Note:
    Depending on the selected 'Original release mode' in the Océ Express WebTools, the
    scanner holds or releases the original after the scan procedure.
    Chapter 3 - Quick start
    70
    Make a half size copy (50%) of a CAD drawing
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Oce manuals Comments (0)