Nortel Modular Ics 6.1 Installer Guide

Services / 371
P0603534  02Modular ICS 6.1 Installer Guide
Services
Using Services, you can control three types of service using 
the time of day and the day of week:
• alternate call ringing, see page 375
• alternate dialing restrictions, see page 379
• alternate call routing, see page 379
You can customize services in general under Common 
Settings. Refer to Common settings on page 372.
Within each type of service, you can customize six schedules.
For example, you may want to combine alternate call...

372 / Services
Modular ICS 6.1 Installer GuideP0603534  02
Common settings
Services share the settings for control telephones, schedule 
names, and schedule times.
Control sets
A control telephone turns Services on and off for the lines and/
or telephones assigned to it. You can assign several control 
telephones for your system. 
A control telephone for lines controls Ringing service, 
Restriction service and Routing service for its assigned lines.
A control telephone for telephones controls Restriction...

Services / 373
P0603534  02Modular ICS 6.1 Installer Guide
Schedule names
The schedule name is shown on the display of the control 
telephone when the schedule is turned on. It identifies the 
active schedule.
Use ≠,  ‘, and CHANGE
 and the dialpad to 
program the name.
Schedule times
Schedule start and stop times are set at times you are most 
likely to want each service to be active.
Use ≠,  ‘, and CHANGE
 and the dialpad to 
program the start and stop times for each schedule, on each 
day. 
Tips - A...

374 / Services
Modular ICS 6.1 Installer GuideP0603534  02
Default schedule times
ScheduleStart timeStop time
Schedule 1: Night23:0007:00
Schedule 2: Evening17:0023:00
Schedule 3: Lunch12:0013:00
Schedule 4: Sched 400:0000:00
Schedule 5: Sched 500:0000:00
Schedule 6: Sched 600:0000:00
Tips - It is only necessary to program start and stop times 
for schedules that are activated automatically. See the 
instructions with Ringing service for information on 
activating schedules.
The time may be entered in...

Services / 375
P0603534  02Modular ICS 6.1 Installer Guide
Ringing service
At certain times or in certain situations, you may want 
additional telephones to begin ringing for incoming lines. The 
most common use of this feature is when a security desk 
telephone begins to ring for incoming lines after 5:00 p.m., a 
practice often called night service. 
These features are programmed under Ringing service.
Ringing groups
Ringing groups allows you to define groups of extended 
ringing sets. A group can be...

376 / Services
Modular ICS 6.1 Installer GuideP0603534  02
Sched:Night
Indicate how Ringing service should be activated for each of 
the schedules.
Service
Use ≠ and CHANGE
 to change the setting for each 
schedule to : Off, Auto, or Manual.
Off — prevents the service from being activated.
Auto — allows you to program a start and stop time for a 
service. You will be prompted to enter start and stop times.
You can still start and stop the service by entering the 
appropriate Services feature code at a...

Services / 377
P0603534  02Modular ICS 6.1 Installer Guide
ExtraDial telephone
ExtraDial telephone allows you to assign an additional 
direct-dial telephone in the Norstar system for each schedule 
you use.
Use CHANGE
 and the dialpad to enter the internal number of the 
extradial telephone.
Line settings
The ring groups and auxiliary ringer for Ringing service is 
programmed for each line individually.
Ringing group
You can assign a predefined ringing group to a line for each 
schedule. See Ringing...

378 / Services
Modular ICS 6.1 Installer GuideP0603534  02
Aux. ringer
Indicate whether the auxiliary ringer, if installed, also rings 
when Ringing service is on. 
Press CHANGE
 to select either: Y (Yes) or N (No).
Tip - Only one ringing group can be assigned to a line for 
each schedule. To combine groups of ringing telephones, you 
must create a new ringing group which contains all the 
telephones you want to ring and assign the group to the line.
Tips - The default ringing telephone is 221 (for...

Services / 379
P0603534  02Modular ICS 6.1 Installer Guide
Restrn service
These settings indicate how the alternate dialing restrictions 
should be activated for each of the schedules.
Use ≠ and CHANGE
 to change the setting for each 
schedule: Off, Automatic, or Manual.
For information about using schedules, refer to the Modular 
ICS 6.1 System Coordinator Guide.
See Ringing service on page 375 for descriptions of the three 
activation settings.
See Restrictions under both Terminals&Sets and Lines 
to...

380 / Services
Modular ICS 6.1 Installer GuideP0603534  02
Routing service replaces a number of tasks that otherwise have 
to be done manually, including:
• entering a line pool code
• dialing an access code for a long distance carrier
• deciding which line pool to use according to the time and 
day
The installer can set up routing to take advantage of any leased 
or discounted routes using information supplied by the 
customer. The system itself cannot tell which lines are cheaper 
to use.
For Call by...