Nortel Modular Ics 6.1 Installer Guide

Terminals&Sets / 341
P0603534  02Modular ICS 6.1 Installer Guide
Default filters
Filter 00 permits unrestricted dialing and cannot be changed. 
Filter 01 is pre-programmed with five restrictions and some 
associated overrides.
In Filter 01, restriction 02 and override 005 allow long 
distance directory assistance calls. Filter 01 reflects the fact 
that area codes can now have any digit as a second digit. This 
is designed to be used with the North American dialing plan.
The dialing string 911, the...

342 / Terminals&Sets
Modular ICS 6.1 Installer GuideP0603534  02
Note:  Default filters are only loaded at a cold start.
Filters 02, 03, and 04, although not preset with restrictions and 
overrides, are used as default filters in these programming 
headings:
FilterHeadingSub-heading
02Terminals&SetsSet restrns:
03LinesLine restrn:
04LinesRemote restrn:
Tips - Filter 00 cannot be changed.
Norstar can have up to 100 restriction filters (00 to 99).
Each programmable filter can have up to 48 restrictions....

Terminals&Sets / 343
P0603534  02Modular ICS 6.1 Installer Guide
You can use • and £ in a sequence of numbers in either a 
restriction or an override. These characters are often used as 
part of feature codes for other systems or for features provided 
by the central office (the public network).
When restricting the dialing of a central office feature code, 
remember to create separate restrictions for the codes used for 
DTMF and pulse lines. Examples of dialing strings that may be 
restricted for this...

344 / Terminals&Sets
Modular ICS 6.1 Installer GuideP0603534  02
Set restrns
Use this heading to assign a restriction filter to a telephone to 
prevent certain numbers from being dialed from that 
telephone. You can also use set restrictions to prevent certain 
features from being used by a telephone. 
Filters
You can assign a different restriction filter for normal service 
and for each of the six schedules. Refer to Services on page 
371 for more information about the schedules.
Use ≠, CHANGE
 and the...

Terminals&Sets / 345
P0603534  02Modular ICS 6.1 Installer Guide
Set lock
You can adjust the amount of personal programming and 
customizing that can be performed at a telephone. 
Press CHANGE
 to select a set lock level of: None, Partial, or 
Full.
Allow last no
A telephone can be prevented from using Last Number Redial 
(≤fi). 
Press CHANGE
 to select the setting: Y (Yes) or N (No).
Allow saved no
A telephone can be prevented from using Saved Number 
Redial (≤fl‡). 
Press CHANGE
 to select the setting: Y...

346 / Terminals&Sets
Modular ICS 6.1 Installer GuideP0603534  02
Line/set restrns
Line/set restrns allows you to assign a restriction filter to a 
specific line that can be used for outgoing calls at a specific 
telephone. This type of filter replaces any line or set restriction 
filters which might otherwise apply. It restricts the numbers 
you can dial on a line, but only from that telephone. The same 
line on another telephone can have different restrictions.
As with set restrictions, you can apply a...

Terminals&Sets / 347
P0603534  02Modular ICS 6.1 Installer Guide
Telco features
Telco features can program the way the Norstar works with 
features and services that are based in the public network or 
other outside source. Norstar is designed to work with two of 
these kinds of services: Call Display and an external voice 
message service.
When you are finished programming Telco features settings 
for one telephone, you can copy those settings to other 
telephones by using COPY
 at the Telco features......

348 / Terminals&Sets
Modular ICS 6.1 Installer GuideP0603534  02
Extl VMsg set
If you subscribe to an external voice message service or central 
voice mail system that is not directly connected to your ICS, 
you can access that service through your Norstar system. The 
external voice message setting controls where the indicator 
shows up when there is a voice message waiting on a particular 
line. The line must be assigned to appear on that telephone. 
Press CHANGE
 to select the setting: N (No) or Y...

Terminals&Sets / 349
P0603534  02Modular ICS 6.1 Installer Guide
1stDisplay
Depending on the services you subscribe to, Call Display 
information may contain the number of the caller, the name of 
the line in your Norstar system that the call is on, or both. For 
each telephone, you can determine which information is 
displayed first. 
Press CHANGE
 to select the setting: Name, Numbr or Line.
Called ID
Called ID allows you to see the extension number and name of 
the set being called on the display. The...

350 / Terminals&Sets
Modular ICS 6.1 Installer GuideP0603534  02
Tips - There must be space available in the log pool in 
order for you to add space to a Call log. The maximum number 
of spaces available is 600.
System-wide log space allocation is performed in Call log 
space under System prgrming. If you want to allocate the 
same log space to all telephones, use the Call log space setting 
instead.