Nortel Modular Ics 6.0 Installer Guide

Specifications / 591
P0992638 03Modular ICS 6. 0 Installer Guide
Digital Trunk Interface
Network interface
* These values are set in Hardware programming. See the Hardware on page 455 
for details.
DSX1 operation
* This value is set in Hardware programming. See the Hardware on page 455 for 
details.
CSU operation
* This value is set in Hardware programming. See the Hardware on page 455 for 
details.
Characteristic Spec/Value
Physical RJ48C 8-pin modular jack
Line rate 1.544 +/- 32 Mbps
Framing...

592 / Specifications
Modular ICS 6.0 Installer GuideP0992638 03
Synchronization performance
Digital trunk signaling support
* These values are set in Hardware programming. See the Hardware on page 455 
for details.
Local test support
*See Tests on page 525 for details on running these tests.
Characteristic Spec/Value
Stratum 4E
Types Options
Loop Start with answer and 
disconnect supervisionOSI interval*
Pulse/DTMF dialing*
E&M Immediate start (Pulse dialing only), Wink 
start, Delay start or ring-down...

P0992638 03Modular ICS 6.0 Installer Guide
Glossary
A
AbsorbLength: A setting that 
determines how many of the digits in a 
destination code will not be dialed by 
the system. AbsorbLength is assigned 
under 
Destination codes in 
Services.
access code: Different sequences of 
characters used to gain access to these 
Norstar features: Line pools, Call park, 
external lines, Direct-Dial telephone, 
Auto DN, and DISA DN.
alarm code: A number that appears 
on the alarm telephone display, 
informing you that...

594 / Glossary
Modular ICS 6.0 Installer GuideP0992638 03
Automatic Handsfree: A feature 
which automatically activates 
Handsfree operation when you make or 
answer a call. Automatic Handsfree is 
assigned under Handsfree in 
Terminals&Sets programming.
Automatic Hold: A feature that 
automatically places an active call on 
hold when you select another 
line.Automatic Hold (
Full AutoHold) 
is assigned in Lines programming.
Automatic Privacy: See Privacy.
Automatic Daylight Savings 
Time: A feature that...

Glossary / 595
P0992638 03Modular ICS 6.0 Installer Guide
features programmed onto each 
programmable memory button. Button 
caps are either pre-printed or have clear 
windows that allow you to insert labels.
Button Inquiry: 
²¥â
With this feature you can check the 
function of each programmable button 
on your system telephone.
C
Call Duration timer: ²àà
A feature that allows you to see how 
long you spent on your last call, or how 
long you have been on your present call.
Call Forward: 
²ÝA feature...

596 / Glossary
Modular ICS 6.0 Installer GuideP0992638 03
telephone before taking the call. Call 
Pickup Directed is enabled under Feature settings in Sys prgrmmng.
Call Pickup Group: See Pickup 
Group.
Call Queuing: 
²¡âÚ
If you have several calls waiting at your 
telephone, you can invoke the Call 
Queuing feature to answer them in order 
of priority. Priority is given to incoming 
calls, followed by callback and camped 
calls.
Callback: If you park, camp, 
or transfer a call to another telephone 
and...

Glossary / 597
P0992638 03Modular ICS 6.0 Installer Guide
feature code 
, or 
after a major event, such as an extended 
power failure.
Combo Cartridge: A cartridge that 
allows you to connect Trunk Modules 
and Station Modules to the ICS to 
expand the system capacity for trunks 
and telephones. Combo Cartridges 
provide six-port or 12-port expansion 
and Services functionality with each 
cartridge. See also Expansion Cartridge.
Companion Wireless: The name for 
Nortel Networks communication 
systems...

598 / Glossary
Modular ICS 6.0 Installer GuideP0992638 03
the prime telephone associated with that 
line. This feature is activated under 
Feature settings in Sys prgrmmng.
destination code: A two- to seven-
digit number that the system interprets 
and then translates into the digits that 
you want dialed out. Both the code and 
its associated dialed digits are assigned 
under Routing service in Services 
programming.
DID trunk: See Direct Inward Dial 
trunks.
DID Trunk Cartridge: The Trunk 
Cartridge...

Glossary / 599
P0992638 03Modular ICS 6.0 Installer Guide
display: A liquid crystal display 
(LCD) on the telephone that guides you 
through feature operation and 
programming.
display button: The Norstar M7310 
telephone and M7324 telephone and the 
Business Series Terminal T7316 are 
each equipped with three buttons 
located directly beneath the display. 
During feature operation or 
programming, some or all of these 
buttons may be used to provide further 
options. If an option is available, it is...

600 / Glossary
Modular ICS 6.0 Installer GuideP0992638 03
external line: A line on your system 
telephone used for making calls to 
destinations outside the Norstar system. 
external music source: See Music 
source.
external paging: A feature you can 
use to make voice announcements over 
an externally-mounted loudspeaker 
connected to the ICS. The external 
speaker  is not a Norstar component and 
must be supplied by the customer.
F
feature button: Many Norstar 
features are invoked by pressing the...