Nortel Modular Ics 6.0 Installer Guide

Glossary / 611
P0992638 03Modular ICS 6.0 Installer Guide
the telephones and other devices 
connected to the Norstar system. 
Terminals and Sets programming is 
performed by an installer or a system 
coordinator.
Time and date:   A programming 
section that allows you to manually 
change time or date. The time and date 
can also be changed by pressing
 
¥¥æé÷ä and entering the 
Basic password or one of the 
programming passwords.
Transfer: 
²àâ
A feature that allows you to redirect a 
call to another...

612 / Glossary
Modular ICS 6.0 Installer GuideP0992638 03
User Preferences: a programming 
section that allows you to assign 
autodialers, user speed dial codes, 
display contrast, and other settings to a 
specific telephone or person. You do not 
have to program these settings at the 
person’s telephone. User preferences 
are assigned in Terminals and Sets 
programming.
User Speed Dial:  
²¥Ý
Three-digit codes (256-279) can be 
programmed to dial external telephone 
numbers. User Speed Dial numbers are...

P0992638 03Modular ICS 6.0 Installer Guide
Index
Symbols
²
**79743 (System ID)
 293
**CONFIG (²**266344)
 305
**DIALPAD (²**3425723) 300
**LINE
 294
**PROFILE (²**7763453)
 299
**SET (set programming) 294
**STARTUP (²**7827887)
 301
**SYSID
 293
**SYSID (²**79743) 453
**TIME (²**8463)
 388
*7, Contrast Adjustment
 549
1, message reply enh 408
811 Call Display
 331
819 ONN blocking
 432
Numerics
0X32
using old modules
 199
1st display, programming
 331
25-pair connector
 225
2-way DID, PRI dialing plan...

614 / Index
Modular ICS 6.0 Installer GuideP0992638 03
Alarm 68-Z 509, 513
Alarm 75
 513
Alarm 76-X 509, 513
alarm messages
programming alarm set
 406
alarm set
programming
 406
alarm telephone
 218
alarms
hospitality
 441
Hospitality services
 207
allow last number redial 328
allow redirect
 318
allow saved number redial
 328
alpha tagging
CLID match
 409
alternate call ringing
 353
analog
message reply enh
 407
name and number blocking
 432
trunk data settings
 334
trunk type 335
analog access lines...

Index / 615
P0992638 03Modular ICS 6.0 Installer Guide
assigned, BRI DNs 476
ATA
accessing external lines
 419
answer timer
 319
device
 320
for OPX applications 266
optional equipment list
programming
 320
settings 318
troubleshooting
 562
use
 320
attn attempts 441
Attn duration
 441
auto associate, SWCA
 403
auto attendant, bypassing
auto DN
access codes
 74
conflicts
 339, 367, 420
DID trunk 83
PRI trunk
 83
private network auto-answer
 83
programming 420
rec’d number length
 420
received number...

616 / Index
Modular ICS 6.0 Installer GuideP0992638 03
Bellcore standard 212
Bellcore/National ISDN Users Forum 
(NIUF)
 57
BLF, M7310 only
bracket
 215
break-in, MCDN 143
BRI
answer mode
 341
assign DNs 476
assign lines/loops
 309
assigning SPIDs to T and NT loops
 472
becoming a clock source
 477
BRI-ST cartridge wiring
 262
BRI-U wiring 250
call type
 473
card
 48–53, 471–476
card programming
 471
cards 249
clock source loops, power up or 
down
 478
DNs on loop 475
D-packet service
 474
handling...

Index / 617
P0992638 03Modular ICS 6.0 Installer Guide
C
cable trough
 225, 232, 274
cadence, service tone 589
call attendant, SL-1 network
call blocking, ONN programming
 432
call by call
card settings
 458
PRI limits
 437
programming 435
programming PRI limits
 437
programming service selection
 436
protocols referenced with services 
435
routing map table
 459
routing table 365
routing, all
 459
routing, incoming calls
 458
routng, none
 459
service selection for PRI 433
services, supporting...

618 / Index
Modular ICS 6.0 Installer GuideP0992638 03
calllog opt’ns 289
camp timeout, programming
 398
camp-on
MCDN
 142
CAP
features
 411
line assignment
 311
line keys
 310
M7324 telephone
moving a set
 412
programming
 411
programming assignment 411
capabilities
listing
 280
programming 317
card
answer timer
 460
CO fail
 460
edge loopback test 527
I/F levels
 461
cards on ICS
 455
cards on KSU
listing
 280
show module
 455, 456
carrier access code
branded outwat calls
 365
conflicts
 422...

Index / 619
P0992638 03Modular ICS 6.0 Installer Guide
hospitality, setting time 440
clock source
becoming a source
 477
description
 476
network clock settings
 478
primary reference 477
programming
 481
sample configurations
 478–481
secondary reference 477
timing master
 477
clocking cartridge
 52
ClockSrc 464
CO fail, TI and PRI
 460
combo cartridg, installation planning
 180
common dialing plan 110
common settings
list
 280
programming
 381
Companion
answer DN
 314
changing DNs
 425
equipment list...

620 / Index
Modular ICS 6.0 Installer GuideP0992638 03
alarms 536
clock source
 464
connecting DTI to external 254
disabling internal CSU
 237
line build
 463
line coding 464
listing
 280
performance statistics
 534
stats 485, 533
turning off/on, disable trunk
 462
customizing call display services
 330
CWI, SL-1 network
cycle, park mode
 399
D
data copied
 292
Data Module
 483
data modules, connecting
 224
data not copied 292
data, call type
 473
date and time, see AutoTime&Date
Daylight Savings Time,...