Nortel Compact Ics 6.0 Installer Guide

Glossary / 341
P0992669 03Compact ICS 6.0 Installer Guide
using Norstar call handling features 
such as Call Park or Call Pickup 
Directed.
Internal number:  A number (also 
referred to as a Directory Number or 
DN) that identifies a Norstar telephone 
or device.
Internal user:  Someone using a 
Norstar telephone within a Norstar 
system.
ISDN: See integrated services digital 
network.
ISDN DN:  A directory number (DN) 
used by ISDN terminal equipment 
connected to the ICS. The system uses  a 
maximum of...

342 / Glossary
Compact ICS 6.0 Installer GuideP0992669 03
Loop Start Trunk Cartridge:  The 
Trunk Cartridge that allows you to 
connect loop start trunks to the Norstar 
system. 
Lunch schedule:  See Schedules, 
and Services.
M
M7000 telephone This telephone has 
a no display. It does have four memory 
buttons. (Note this telephone is only 
supported on systems running Profile 2, 
3, or 4).
M7100 telephone:  A telephone with 
a single line display and one 
programmable memory button without 
an...

Glossary / 343
P0992669 03Compact ICS 6.0 Installer Guide
Network Call Diversion (NCD)  
Norstar Network Call Diversion (NCD) 
is a network function that allows 
forwarding and redirection of calls 
outside the Norstar network when using 
an ETSI ISDN line. Functionality is 
similar  to that of External Call Forward 
(ECF).
Network DN: A number supplied by 
the ISDN network service provider for 
ISDN trunks (incoming lines).
Night schedule:  See Schedules; 
Services.
NT1 (Network termination type 
1): A...

344 / Glossary
Compact ICS 6.0 Installer GuideP0992669 03
Pause symbol (›) uses one of the 24 
spaces in a dialing sequence. For pulse 
dialing, 
¥ inserts a 1.5-second pause 
into the dialing sequence.
PBX:  private branch exchange.
Pickup Group:  
²àÞ
A telephone can be placed into one of 
nine call pickup groups. A call ringing at 
a telephone within a pickup group can 
be picked up at any other telephone 
within the same pickup group. A 
telephone is assigned to a pickup group 
under Capabilities in...

Glossary / 345
P0992669 03Compact ICS 6.0 Installer Guide
Pulse/tone dialing:  An external line 
setting for pulse or  tone dialing.  Pulse is 
the traditional method of dialing used by 
rotary-dial or push- button single-line 
telephones. Tone dialing allows 
telephones to communicate with other 
devices such as answering machines. 
Tone dialing is required to access the 
features that PBX systems may offer or 
to use another Norstar system remotely.
R
Recall:  See Link time.
Receiver:  The handset of a...

346 / Glossary
Compact ICS 6.0 Installer GuideP0992669 03
ring group:  A setting under Services 
that allows you to assign a number of 
different telephones to ring during one 
of the schedules.Up to 20 ring groups 
can be programmed by an installer or a 
system coordinator plus.
ring type 
²¥ß
A feature that allows you to select one of 
four distinctive rings for your telephone.
ring volume: 
²¥¡â
A feature that allows you to set the 
volume at which your telephone rings.
ringing service:  A Services...

Glossary / 347
P0992669 03Compact ICS 6.0 Installer Guide
same copy capability as COPY, which is 
more selective of the settings that can be 
duplicated.
Set filter:  See Restriction filter.
Set lock (telephone lock):  This 
feature allows you to limit the number 
of features that may be used or 
programmed at a telephone. Full set 
lock allows very few changes or 
features, Partial set lock allows some 
changes and features, and No set lock 
allows any change to be made and any 
feature to be used. Set...

348 / Glossary
Compact ICS 6.0 Installer GuideP0992669 03
access to programming. The System 
coordinator plus password can be 
assigned and changed in Passwords 
programming. 
System coordinator plus 
programming:  A combination of 
common and installer programming 
settings. Press 
²¥¥‚¯öìéí, 
then 
ꂸñèê to access 
System coordinator plus programming. 
System coordinator 
programming:  The programming 
settings that are most commonly 
changed once the Norstar system is 
installed. Press 
 
²¥¥‚¯öìéí,...

Glossary / 349
P0992669 03Compact ICS 6.0 Installer Guide
Target lines:  Lines used to answer 
incoming calls  only. A target line routes 
a call according to digits it receives from 
an incoming trunk. They are referred to 
by line numbers (049-074) in the same 
way as physical lines.
TE: See Terminal equipment.
TEI (Terminal Endpoint 
Identifier): A two-digit number used 
to identify devices that use an ISDN 
connection for D-channel packet 
service.
Telco features:  A programming 
section that allows...

350 / Glossary
Compact ICS 6.0 Installer GuideP0992669 03
User Data:  User Data is an option in 
the Set Copy feature. User Data refers to 
the personal settings that are unique to 
an individual telephone, and are not 
programmed for the system. User Data 
is programmed at each telephone. These 
settings, for example, include User 
Speed Dial and the assignment of 
programmable memory buttons.
User Filter:  See Restriction filter.
User Preferences:  a programming 
section that allows you to assign...